1/4"-20 Size Stainless Steel Toggle Bolt Anchors, 6 pack - Garelick

Garelick
1/4"-20 Size Stainless Steel Toggle Bolt Anchors, 6 pack - Garelick
Your Price: $30.90
Save: $10.89
(26% Off $41.79)
Part # 21026 ValueShip™ Eligible
SHIPS TODAY!* if ordered in 9 hrs 30 mins.
This item is found in the following Product Families
Garelick Toggler Brand Stainless Steel Toggle Bolt Anchors
Garelick Toggler Brand Stainless Steel Toggle Bolt Anchors
Installing a pedestal seat in your boat is no longer a difficult task thanks to Garelick Toggler Bolt Anchors. These anchors made of stainless steel …

For deck or cabin thickness from 3/8" to 3 5/8"? (1 - 9cm), requires 1/2" (13mm) holes
6 PACK : PEDESTAL MOUNTING KIT
21026 : 6 each, 1/4"-20 size anchors only for mounting any model Pedestal Seat (sold in poly bag with header card)

Features:

  • Positively secures seats and table bases to decks or any accessory to cabin walls. Made of 304 Stainless Steel
  • Saves time and labor - Provides added strength
  • Add reinforced safety and comfort to pedestal installations
  • Works with all Garelick Seat Pedestal Bases

Full StarFull StarFull StarFull StarEmpty Star Based On 10 Reviews | Write Review
Full StarFull StarFull StarFull StarEmpty Startoggle bolts
by Stephen from Forked River, New Jersey on June 10, 2016
worked well other then the plastic straps being a little weak.Two straps on two toggles out of the six were broken on one side in the pack! but was able to mount the trolling motor using the fifth one.first one fell into the hull.
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty StarGood
by Fred from Florence, Alabama on May 05, 2016
Product was as described, however as other reviewers had reported, I did Have 1 that the plastic broke off while inserting in floor hole. Thanks to another poster, I went to Home Depot and purchased a similar product and used that products plastic on the stainless one. Worked great.
Was this review helpful?
Full StarEmpty StarEmpty StarEmpty StarEmpty StarNeed to be built out of better material
by John from Council Bluffs, Iowa on April 19, 2016
Out of the package of 6, I think I had 2 that installed correctly. The tabs that hold the stainless steel bar in place kept breaking off. One was even broken before I took it from the package. You'd think they'd be built as durable as zip ties, but they're not.
Was this review helpful?
Full StarFull StarFull StarEmpty StarEmpty StarWorks but high failure rate on plastic
by Peter from Boulder, Colorado on April 17, 2016
These toggle bolt anchors solve the very sticky problem of mounting items to a boat deck when you don't have access to the bottom of the deck - I used them for mounting a trolling motor to the front of an aluminum bass boat. Their design works well and I got the trolling motor mount attached. However the quality control on the plastic parts is pretty lousy. On about half the bolts I used, the plastic was either unusable or it failed and the toggle fell into the boat, requiring me to order a second set to complete my project. So I'd give this product 5 stars for design, about 1.5 stars for execution.
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarWork good
by Don from Deltona, Florida on January 03, 2016
But a little expensive, but I guess a speciality item would cost more!
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star1/4"-20 Size Stainless Steel Toggle Bolt Anchors, 6 pack - Garelick
by Michael from Hilton Head Island, South Carolina on October 08, 2014
Once the Toggle is in place it is great. The nylon strips could be a little stronger as the tend to break before the toggle is secure. This is my second set. The first ones have been in use for about 3 years in a sal er environment and are still holding strong. All in all a very good product.
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarGarelick Toggles
by Gary from Lake Park, Georgia on August 18, 2013
Great for trolling motors.
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty StarToggle Bolt Anchors
by Russell from Port Neches, Texas on July 20, 2012
These work great. My only complaint is they are too pricy for what you get.
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty StarEasy to use
by Lewis from Jefferson City, Missouri on November 07, 2011
I used a six pack of these to add another pedestal base to a boat with a 1/2 inch plywood floor. I had installed other bases before putting the floor in, but these seemed like the best option for installing once the floor was riveted in. One cautionary note: if there is flotation foam all the way up to the underside of the floor, you need to remove it to about an inch below the surface and about an inch in diameter. This will give you space to swivel the toggles flush with the underside of the floor. Once I figured that out, installation was a breeze. I chucked a hex key (L-shaped) with the long leg in a drill, inserted the short leg in the hole, and chewed the foam up below the hole so I could install the toggles. Plenty of polyurethane adhesive (3M 5200 or equivalent) completed the installation. I haven't yet put it to a stress test, but I just can't see the toggles pulling through the plywood.
(6 of 6 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty StarAnchors Worked Great
by Thad from Shrezeport, Louisiana on June 30, 2011
These anchors worked very well and were easy to use. A well designed product. I don't think the seat I used them on will ever move again. My only complaint is the price. I think the price is too high because it's a "marine" product. But I wasn't able to find another alternative so I guess you have to pay the price.
(4 of 4 people found this review helpful)
Was this review helpful?
Q:
Do these come with stoppers and screws?
A:
No they do not. They come with a 6 pack of 1/4"-20 size anchors only.
Ask a question
Question & Answer Guidelines
This product ships in 1 business day.
Add to Cart and enter your Postal Code to determine the shipping charges and estimated delivery date.
Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies