West System
1 Quart - West System
Price Too Low to Show!
Add to Cart for Price
Part # 105A, List Price: $44.22
2nd Day Air for $2.99 More Eligible
SHIPS TODAY!* if ordered in 3 hrs 36 mins.
This item is found in the following Product Families
  • 105 Resin is the base material of the WEST SYSTEM family of products, on which all of the WEST SYSTEM compounds are built.
  • The resin is a clear, pale yellow, low-viscosity liquid epoxy resin.
  • Formulated for use with WEST SYSTEM hardeners, it can be cured in a wide temperature range to form a high-strength solid with excellent moisture resistance.
  • It is designed specifically to wet out and bond with wood fiber, fiberglass, reinforcing fabrics and a variety of metals.
  • An excellent adhesive, 105 will bridge gaps and fill voids when modified with WEST SYSTEM fillers and can be sanded and shaped when cured.
  • With roller applications, it has excellent thin-film characteristics to flow out and self-level without "fisheyeing."
  • The resin cures clear so that you can achieve a natural finish when coating with varnish.
  • It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyesters.
  • Resin viscosity is approximately 1000 cps at 72°F (22°C).
  • HARDENER MUST BE ORDERED SEPARATELY.
  • USE WITH A DISPENSING PUMP
  • Average Customer Review for 1 Quart - West System
    Full StarFull StarFull StarFull StarHalf Star
    Based On 3 Reviews | Write Review
    Full StarFull StarFull StarFull StarFull Star
    Epoxy
    by Herbert from San Carlos, California on September 15, 2017
    Great product, great prices and services. My favorite place to shop
    Was this review helpful?
    Full StarFull StarFull StarFull StarEmpty Star
    Works great
    by Karl from TWO Harbors, Minnesota on May 12, 2017
    Used this and the 206 hardener to seal up my new transom board. Worked great, had a little left over so I used up the residual on new base boards for my old boat seats.
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    Outstanding coating
    by Jonathan from Melvin, Michigan on February 08, 2012
    I used this epoxy to coat a plywood transom that I was putting in my Starcraft Jet. It worked perfectly!! It was thin enough to spread with a paint roller, but still coated things well. Think of a standard paint consistency and application methods. This is a A++++++ product!
    (1 of 1 people found this review helpful)
    Was this review helpful?
    This product ships in 1 business day.
    Add to Cart and enter your Postal Code to determine the shipping charges.
    Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
    Standard Shipping Policies