216 Special Thinner is a fast evaporating solvent which, when added to specified paint coatings, improves drying in cold climates and facilitates spray application. Also recommended for removing sanding residue from hull bottoms, wiping down bare aluminum clean and for the general clean-up of paint equipment. For use with most single part topside and antifouling paints.
|Product ||Brush ||Spray ||Cleanup ||% Thinner Required |
|Brush ||Spray |
|Perfection Polyurethane ||2333N ||2316N ||2333N or 2316N ||As Needed 5-10% ||As Required 25-35% Max |
|Toplac Silicone Copolymer ||333 ||216 ||216 ||As Required 10% Max ||10-15% |
|Brightside® ||333 ||216 ||216 ||As Required 10% Max ||10-15% |
|Yacht Enamel ||333 ||216 ||216 ||As Required 10% Max ||10-15% |
|Interstain ||333 ||N/A ||333 ||As Required ||N/A |
|Varnishes ||333 ||216 ||216 ||As Required 10% Max ||5-10% |
|Bottom Paints (conventional) ||216 ||216 ||216 ||10% 1st coat wood only ||As Required 10% Max |
|Micron® Extra, Micron® CSC, Trilux® 33, Trilux®, Tri-lux® II, Ultra ||433 ||216 ||433 or 216 ||As Required 10% Max ||As Required 20-30% Max |
|Fiberglass Bottomkote® ACT ||216 ||216 ||216 ||10% 1st coat wood only ||As Required 10% Max |
|Micron® Optima ||6216 ||6216 ||Water ||As Required 10% Max ||As Required 10% Max |
|Fiberglass Bottomkote® Aqua ||6216 ||6216 ||Water ||As Required 10% Max ||As Required 10% Max |
|VC® Offshore ||355 ||355 ||355 ||10% 1st coat wood only ||As Required 10% Max |
|VC 17m® Extra, VC 17m® ||V172 ||V172 ||V172 ||10-15% Max ||10-15% Max |
|These are only general requirements. Thinner quality and type vary depending upon temperature and specific application. |
Disclaimer: Charts apply to Interlux products only. The information provided is not intended to be exhaustive. Because iboats.com does not know how this information is being used, they cannot take responsibility for any actions as a result.
The performance of marine paint on many factors outside the control of iboats.com, including surface preparation, proper application, and environmental conditions. Therefore, iboats.com cannot guarantee this product's suitability for your particular purpose or application.
By purchase or use of this product, buyer agrees that the sole and exclusive remedy, if any, is limited to the refund of the purchase price or replacement of the product at iboats.com'™ option.
This product ships in 1 business day.
Add to Cart and enter your Postal Code to determine the shipping charges.
Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.