3/4" Hollow Back Stainless Steel Insert
Rigid vinyl water jacket rub rail prevents rust from forming on stainless steel overlays. Pockets designed in the primary rub rail promote oxygen flow between the overlay and primary rub rail, which allows the backside of the insert to dry thoroughly. This design also permits a fresh water rinse betweem the overlay and the rub rail virtually eliminating caustic salt deposits. Rigid vinyl rub rail tightly forms to the boats' contours; matches gel coat finishes beautifully and has exceptional lasting qualities in the most adverse conditions.
Insert sold separately, see 3/4" x .062" Gauge Hollow Back S/S Rub Rail: S11-4511
Caution: Depending on the complexity of the installation, professional help and/or tools may be required.
PLEASE NOTE: This product may require ground freight delivery because of excess length and/or weight. Please call 1-800-914-1123 for a shipping quote.
*All rub rails shipped freight are non-returnable.
Please be careful when ordering to choose the correct product.
* Items over 8ft in length can possibly be cut down to 8ft lengths allowing for UPS delivery. Should you want this option please call iboats Customer Service at 1-800-914-1123.
Please be careful when ordering this product, it has limitations that differ from our General 30-day Return Policy. After all, we want you to be satisfied with your order so you'll return again and again as an iboats.com customer, and to also recommend us to your boating friends
- No returns