Moeller
3/8" Barb Female Fuel Line Engine Connector for Honda - Moeller
Price: $8.38
Save: $2.91
(25% Off $11.29)
Part # 033497-10
2nd Day Air for $4.99 More Eligible
SHIPS TODAY!* if ordered in 5 hrs 11 mins.
This item is found in the following Product Families
Honda 3/8" female connector for fuel line assembly. For engines 2001 and newer with the round and square attachment at the bottom. Connects to the tank or engine ends. Moeller female fuel connector utilizes stainless steel components to ensure no rust. A minimum of three small ball bearing provide a positive lock when a mating connector is assembled. Connector body is manufactured from nickle plated brass with FKM single o-ring seal that is designed to work with today's ethanol based fuels.

Cross Reference
Tempo Part Number: n/a
Scepter Part Number: # 05783

Full StarFull StarFull StarEmpty StarEmpty Star
Based On 8 Reviews | Write Review
Full StarEmpty StarEmpty StarEmpty StarEmpty Star
Honda fuel line connector not correct part number
by Pat from Baton Rouge, Louisiana on June 14, 2016
I purchased a 3/8" female honda fuel line connector. There are two types, one with two round holes, one with one round and one square hole. Reading through the questions listed for the part, the one I ordered should have come with two round holes and this is the part I needed. I received the other connector, one round and one square hole. Called customer service, discussed the problem and was sent another connector. Again the wrong one. Called customer service again. It is obvious that the part number for this connector does not match the description. And I was told by the customer service rep there was a chance the second one would be incorrect. So now I have two that do not fit my engine. Called customer service again. This agent was going to look into the issue with the vendor and call back. I havent heard for 10 days now. If you read the previous reviews this is not a new problem. Years ago the same problem was described. Evidently it is very difficult to determine which part to send? I dont know. But I have paid for a part that does not fit and still have not heard if this problem will be resolved by iboats. It is hard to rate this item because I cant use it. The poor rating reflects being sent the wrong part twice. The quality of the part looks ok.
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarEmpty StarEmpty StarEmpty StarEmpty Star
Please show the holes!
by Charles from Geneva, New York on April 28, 2016
I need a connector for a 20+ year old Honda 10 hp. The original hose was 1/4" diameter. The new tank needs 3/8". The original connector had two round holes where it clipped to the engine. This new connector has a round hole and a square one. The photo you have is of no help because it doesn't show the holes. Nonetheless, the reviews said this one had two round holes and that's why I bought it. Wrong.
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Fuel line fitting
by George from Locust Grove, Virginia on May 23, 2014
Perfect fit on my 2004 BF50 Honda outboard. Original barb was 1/4" but this year I replaced my fuel line and changed everything to 3/8".
Was this review helpful?
Full StarFull StarFull StarEmpty StarEmpty Star
Honda Fuel line engine connector
by Francis from Williamsport, Indiana on April 16, 2014
They sent me the wrong fuel connector for my 1997 Honda 50 HP outboard. I think iboats need to ask the consumer what year your outboard is before sending you the wrong part! I gave them a 3 rating only because they had very fast shipping!
Was this review helpful?
Full StarEmpty StarEmpty StarEmpty StarEmpty Star
fuel line connector
by Halbig from Lawrenceburg, Indiana on September 16, 2013
Honda does not specify that they made two different connectors so obviously I have the wrong one. the one I purchased has a rectangle lug and the one I need is round.
(5 of 5 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
good product
by Ian from Vancouver, British Columbia on May 12, 2012
Had to wait quite a while but they finally sent the right parts even gave and extra one. Good service from Moeller.
(3 of 4 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
good product
by Ian from Vancouver, British Columbia on May 12, 2012
Had to wait quite a while but they finally sent the right parts even gave and extra one good service from Moeller
(2 of 2 people found this review helpful)
Was this review helpful?
Full StarEmpty StarEmpty StarEmpty StarEmpty Star
Does not fit older honda
by Ian from Vancouver, British Columbia on April 23, 2012
This product does not fit older honda motors. Moeller knows about the problem listings but has not corrected it. They claim they would send me the one they think fit. I am still waiting for it.
(16 of 16 people found this review helpful)
Was this review helpful?
Q:
Does this have 2 round female openings or 1 round and 1 rectangular?
A:
This has 1 round port and 1 rectangular port.


Q:
Does your 3/8" Barb Female Fuel Line Engine Connector for Honda - Moeller product fit a Honda BF100 (10hp) outboard?
A:
These are for 2001 and newer engines.


Q:
Is this the right fit for a 5hp Honda outboard? Model BF5?
A:
According to Moeller this is correct connector for 2001 and newer Honda's.


Q:
Do you have a fuel line connector for a 1998 Honda 15 hp. The stock connector has two round openings.?
A:
Hi- we do not offer a product specifically for that year Honda.


Ask a question
Question & Answer Guidelines
This product ships in 1 business day.
Add to Cart and enter your Postal Code to determine the shipping charges.
Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies