Keep Summer Going Strong with our August Sale Savings up to 50% OFF!

40"-70" Snap End Support Pole for Custom Covers - ENDURACover

ENDURACover
40"-70" Snap End Support Pole for Custom Covers - ENDURACover
Your Price: $17.99
Save: $23.86
(57% Off $41.85)
Part # 60000 ValueShip™ Eligible
This item is found in the following Product Families
ENDURACover Boat Cover Vents and Support Poles
Prevent dry rot and mildew. These lightweight telescoping poles are designed to support your cover so that water does not pool. Available in three …
The Snap End Support Pole will work for the following ENDURACovers: custom covers, pontoon covers and select deckboat semi-custom covers. For these applications, a female snap end is sewn into the cover.
  • The Snap End Support Pole must be purchased at the same time as cover purchase.
  • **The female snap end is included only with custom covers, pontoon covers, and select deckboat semi-custom covers.
Full StarFull StarFull StarHalf StarEmpty Star Based On 12 Reviews | Write Review
Full StarFull StarFull StarFull StarFull Stardoes as advertised
by Robert from Amsterdam, New York on May 12, 2015
The pole does what it should. It fits under the cover and holds it up to keep the rain from building up in the cover, and I could not ask for more.
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarPoles
by Pamela from Spendora, Texas on July 31, 2014
Very worried that these poles will punch a hole in the boat cover over time. They do not stand up well. Keep falling down. Have had rain twice and both time had to bail out water.
Was this review helpful?
Full StarFull StarFull StarEmpty StarEmpty StarPole lengths lack flexibility
by Benjamin from Westfield, Indiana on July 15, 2014
The poles work OK but the extensions are fixed in length so you can't adjust the poles except to specific lengths. I would like to adjust the pole to be about six inches longer but the extensions are much longer.
Was this review helpful?
Full StarFull StarFull StarEmpty StarEmpty Starsnap end support
by Gerald from Winnipeg, Manitoba on September 04, 2013
I have not used the support as yet.
(0 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Starsupport pole
by Kenneth from Leavenworth, Kansas on June 03, 2013
works great
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarCustom only
by David from Danville, California on June 01, 2013
Only applies to a custom cover. My mistake but customer service took care of me.
Was this review helpful?
Full StarEmpty StarEmpty StarEmpty StarEmpty Starsupport poles
by Robert from Greensboro, Georgia on January 12, 2013
Actually the support pole works fine. The reason I had to order it was the previous support poles I purchased had plastic inserts that broke rather than the metal sleeve. I sent an e-mail asking if I could get 6 more metal sleeves to replace the plastic inserts and have never heard back. Bob Stevenson rhs9@aol.com
Was this review helpful?
Full StarFull StarFull StarEmpty StarEmpty StarDoes the job
by Seth from Lititz, Pennsylvania on November 17, 2012
These poles work well enough. I purchased these to go along with a semi-custom cover because an exact fit custom cover was not available for my Four Winns. I thought they would come with snaps to attach to the inside of the cover. They did not. Apparently that is not an option with a semi-custom cover...only a custom cover. They do have the rubber feet that slide over the snap end and hold the pole stationary under the cover. The inner metal support pole does not slide very easily within the outer. I guess this is a good thing since the pole will not collapse very easily when installed under the cover, but it is kind of a pain when trying to collapse poles. Overall, they get the job done, but not the highest quality support poles I have used.
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarSnappy snap pole
by Andrew from Noblesville, Indiana on October 05, 2012
Works as expected. The rubber works well on non-carpet. I added some of the rough velcro to the bottom of one of my poles that sits on carpet to keep it from moving. So far so good.
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty StarA bit awkward to use
by Joseph from Chase City, Virginia on March 25, 2012
I intend to modify the poles by making wooden stands for them to make it easier to keep them upright. It would have great if they were made with "wings" attached to the feet to improve their upright stability.
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star40"-70" Snap End Support Pole for Custom Covers - ENDURACover
by Keith from Hastings, Nebraska on March 19, 2012
Well made, looks like it will do the job, did not get the snap to go on the cover but came with a rubber cap to hold up the cover. Do not think I will trailer with it though.
Was this review helpful?
Full StarEmpty StarEmpty StarEmpty StarEmpty StarPoles and Cover
by Kristine from Boyce, Louisiana on September 08, 2011
Pole broke upon installation. Of course, my husband was installing it on a cover that he bought from you all that is way too big and is not waterproof. It is a total mess and way too much money to spend for junk. We have never dealt with a pontoon boat before and have not known any better but that almost $400 cover cannot possibly be the correct one for our boat. We felt that it was too late to complain. His name is Warren Joubert and he purchased it in July, 2011.
(1 of 4 people found this review helpful)
Was this review helpful?
Q:
In the photo you show vinyl end, tip end and snap end poles. I can only find the tip and snap ends. Are the vinyl end poles still available? If so, can you link me to the page please?
A:
The vinyl end is the snap end pole with a vinyl cover. That's part number 60000.
Ask a question for
Question & Answer Guidelines
This product ships in 3 business days.

Add to Cart and enter your Postal Code to determine the shipping charges and estimated delivery date.
* Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies

Please be careful when ordering this product, it has limitations that differ from our General 30-day Return Policy. After all, we want you to be satisfied with your order so you'll return again and again as an iboats.com customer, and to also recommend us to your boating friends

Semi-Custom Boat Covers

Semi-custom covers are "made-to-order" and are thus specific to your order. However, we understand that sometimes a product you purchase just doesn't work out, which is why we want to make the return process as easy as possible for you. After all, we want you to be satisfied with your order so you'll return again and again as an iboats.com customer, and to also recommend us to your boating friends.

A made-to-order semi-custom cover may be returned within the first 30 days after shipment, but is subject to a 15-25% restocking fee. Odd-Lots, Liquidations, In-Stock Specials, Closeouts and customer requested alterations are non-returnable unless an error was made by iboats.com or by the boat cover manufacturer.

Merchandise must be in new, unused condition with all original packaging in good condition; plus parts, accessories, manuals, and/or warranty cards included. You will need to receive a return authorization number (RA #) as well as instructions from our Customer Service Department.

Please note that each boat cover manufacturer may have additional requirements concerning product returns or warranty claims, including but not limited to: restocking fees, shipping fees, or product order change fees.

Because boat covers are "made-to-order", there will be a $25-$50 fee for any boat cover order cancellation after 1 business day of purchase, as the cover has already gone into production.

Warranty Policy

30 days after the purchase date, the manufacturer of the product(s) will need to be contacted for a warranty claim.

Returns for Canadian Customers

Canadian customers, please be careful when placing your order; iboats.com does not accept any return merchandise on Canadian orders unless the merchandise you received was defective, damaged, or an error was made by iboats.com. In such cases, please contact iboats.com Customer Service within 30 days of the original shipping date for a return authorization number. Returned items that do not have a RA # will not be accepted.

See our complete return policy.
Save More Now and Keep the Summer of Boating Fun Going Strong!