6"-12" Electric Sending Unit Tank Depth - Moeller

The product description doesn't mention that the new sending unit does come with a new gasket, mounting screws and nut in the package. It lined up perfectly with my existing fuel tank. It went on an 89 Bayliner Capri 21 gallon integral fuel tank. The rod was easily measured and cut with a good pair of diagonal cutters. The instructions were clear (read them first, not second like I usually do). It is really nice to know how much fuel I have on board now. Just a note....with the boat level it will give a true reading...but if your not running on plane,it will read differently due to the movement of the float. Marcie J

every thing lined up came with new screws gasket would buy again if i had to

Installed on Moeller 13 gallon tank and the screw holes didn't line up very good two out of five are not straight up and down but tank didn't leak after install so hopefully it will be okay.

Haven't had a working fuel gauge in about 6 years. Finally I decided to figure out what the issue was and after reading forums here, I grounded the sender and it was bad. Measured my tank (12") and ordered this unit. Got it really fast (3 days) and packaging with instructions on it was printed clearly. Fit perfectly and now my fuel gauge works beautifully!! Oh and it does come with a new gasket. 1986 Invader V210 Cuddy with an OMC 5.7 V8

this product worked great since I was unable to locate an OEM sender for my 1996 starcraft 2212. tested it on the gauge before I put it in and it worked perfectly. was pretty much a drop in installation. even came with new gasket and screws.