This product is currently out of stock. As inventories are updated it will again be available for purchase.
#8 10lb Galvanized Fluke Style Anchor - Seasense
Price: $16.70
(Out of stock)
Save: $4.99
(23% Off $21.69)
Part # 50073772
2nd Day Air for $2.99 More Eligible
(Out Of Stock)
This item is found in the following Product Families
  • The SeaSense galvanized penetrating fluke style anchor is designed to penetrate sand, mud, gravel and grassy bottoms quickly while maintaining a firm hold.
  • Arc welded oversized flukes pivot downward into bottom to set fast, stow flat and provide years of reliable service.
  • Excellent weight-to-holding power ratio, compared to cast anchors.

Full StarFull StarFull StarFull StarFull Star
Based On 2 Reviews | Write Review
Full StarFull StarFull StarFull StarFull Star
Very satisfied with this product
by Karen from Beverly Hills, Florida on June 14, 2013
A great value and so easy to purchase and quick shipping
(2 of 3 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Does what it's supposed to do
by Neil from Fresno, California on August 09, 2012
We recently bought a 1976 Catalina 22 sail boat. The PO had a much smaller 4 lb. fluke-style anchor on the boat with only about two feet of 1/4" chain connected to it. The owner's manual for the C22 said a 8-12 pound "Danforth-type" anchor should be used with between 10-15 feet of 3/8" chain and 200-300 feet of 3/8 anchor line. This 10 pound anchor was right in the range of what the C22 owner manual recommended and the price, even after shipping, was much better than a similar anchor at my local West Marine so I bought it. I also picked up 15 feet of 3/8" galvanized chain and 200 feet of 3/8" three-strand nylon line to go with it. It's probably overkill, even though this is specifically what the owner's manual recommends, and we got a big Rubbermaid oval laundry basket to store it all in. The holes in the side of the laundry basket plus the extra ones I drilled in the bottom for water drainage allows my anchor and rode to be able to thoroughly dry out between uses. I've only used it once so far and anchored in about 25 feet of water and after we set the anchor we had way more rode left than we needed on that occasion, but the anchor did what it's supposed to do! Now if I could only come up with an easier method of rolling up the anchor line and storing everything after weighing anchor.
(2 of 2 people found this review helpful)
Was this review helpful?
What is the width of this anchor?
It is 18-1/4" wide.

Is this ok for a 24" Center Console?
No you will need the larger style anchor, part number 50073774.

What is the length of this anchor?
It is 24" total.

Ask a question
Question & Answer Guidelines
This product ships in 1 business day.
Add to Cart and enter your Postal Code to determine the shipping charges.
Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies