Attwood 90 Fuel Tank Vents

90 Degree Fuel Tank Vent, Black Plastic - Attwood
Your Price: $10.00
Save: $3.59
(26% Off $13.59)
Part # 16701
Replacement Cover for 1671-1 - Attwood
Your Price: $5.07
Save: $0.62
(10% Off $5.69)
Part # 911527-1
90 Degree Fuel Tank Thru Hull Gas Vent, Black - Attwood
Your Price: $14.07
Save: $1.32
(8% Off $15.39)
Part # 1670-3
No Reviews | Write Review
90 Degree Fuel Tank Thru Hull Vent Fitting Replacement Cover for 1670-3 - Attwood
Your Price: $5.15
Save: $1.34
(20% Off $6.49)
Part # 911526-1
No Reviews | Write Review
Attwood
Includes a series of baffles and traps to allow air to move freely while preventing water from splashing back into the tank. Eliminates the need for an anti-siphon loop in the vent hose. Allows more direct routing of hose to the fuel tank. For use with 5/8" Hose I.D.. hose. Requires 2" height clearance for anti-siphon feature. Installation hole Stud Size: 3/4". 9/16" Max. hull thickness.
90 Degree Fuel Tank Vent, Black Plastic - Attwood
Representative photo only.
Includes a series of baffles and traps to allow air to move freely while preventing water from splashing back into the tank. Eliminates the need for an anti-siphon loop in the vent hose. Allows more direct routing of hose to the fuel tank. For use with 5/8" Hose I.D.. hose. Requires 2" height clearance for anti-siphon feature. Installation hole Stud Size: 3/4". 9/16" Max. hull thickness.
Replacement Cover for 1671-1 - Attwood
Representative Photo
White. These vents help prevent water from entering the fuel tank, yet allow air to vent freely, during normal sea conditions and washdowns. This eliminates the need for an anti-siphon loop in the vent hose. For 5/8" I.D. hose. Meets ABYC standard.
90 Degree Fuel Tank Thru Hull Gas Vent, Black with Stainless Steel Trim Cover - Attwood
90 Degree Fuel Tank Thru Hull Gas Vent, Black with Stainless Steel Trim Cover - Attwood
Representative photo.
90° waterproof fuel tank vent, prevents ingestion of water into fuel tank under normal sea conditions and wash down. Design includes a series of baffles and traps to allow air to move freely while preventing water from splashing back into the tank. Eliminates the need for an anti-siphon loop in the vent hose . Requires 2" height clearance for anti-siphon feature. Installation hole size: 3/4". Meets ABYC Standard H-24. For use with 5/8" I.D. hose. Black plastic. Skin packed.
90 Degree Fuel Tank Thru Hull Gas Vent, Black - Attwood
90 Degree Fuel Tank Thru Hull Gas Vent, Black - Attwood
Representative photo.
90° waterproof fuel tank vent, prevents ingestion of water into fuel tank under normal sea conditions and wash down. Design includes a series of baffles and traps to allow air to move freely while preventing water from splashing back into the tank. Eliminates the need for an anti-siphon loop in the vent hose . Requires 2" height clearance for anti-siphon feature. Installation hole size: 3/4". Meets ABYC Standard H-24. For use with 5/8" I.D. hose. Black plastic. Skin packed.
90 Degree Fuel Tank Thru Hull Vent Fitting Replacement Cover for 1670-3 - Attwood
90 Degree Fuel Tank Thru Hull Vent Fitting Replacement Cover for 1670-3 - Attwood
Representative photo.
90° waterproof fuel tank vent, prevents ingestion of water into fuel tank under normal sea conditions and wash down. Design includes a series of baffles and traps to allow air to move freely while preventing water from splashing back into the tank. Eliminates the need for an anti-siphon loop in the vent hose . Requires 2" height clearance for anti-siphon feature. Installation hole size: 3/4". Meets ABYC Standard H-24. For use with 5/8" I.D. hose. Black plastic. Skin packed.
90 Degree Fuel Tank Thru Hull Gas Vent, Black with White Vent Head - Attwood
90 Degree Fuel Tank Thru Hull Gas Vent, Black with White Vent Head - Attwood
Representative photo.
90° waterproof fuel tank vent, prevents ingestion of water into fuel tank under normal sea conditions and wash down. Design includes a series of baffles and traps to allow air to move freely while preventing water from splashing back into the tank. Eliminates the need for an anti-siphon loop in the vent hose . Requires 2" height clearance for anti-siphon feature. Installation hole size: 3/4". Meets ABYC Standard H-24. For use with 5/8" I.D. hose. Black plastic. Skin packed.
Based On 1 Review
fast by Barry - Gilford, OntarioJune 12, 2013
fast delivery
Was this review helpful?
Average Customer Review for Replacement Cover for 1671-1 - Attwood
Based On 2 Reviews
Vent Nipple Replacement by Steven - Folsom, CaliforniaAugust 07, 2013
Being able to purchase the vent nipple portion of the P-Trap (which is the exposed portion on the outside of the hull) is more cost effective than having to replace the entire P-Trap assembly. Thanks for providing availability of this replacement part in either Black or White versions.
(1 of 1 people found this review helpful)
Was this review helpful?
An exact replacement by Peter - Bradenton, FloridaAugust 12, 2013
It is as shown. An exact replacement.
Was this review helpful?
Just what I needed by Vincent - Chatsworth, GeorgiaJune 30, 2011
Easy installation, SS was a nice upgrade from the OEM plastic trim cover.
(5 of 5 people found this review helpful)
Was this review helpful?
work good by Timothy - Canfield, OhioSeptember 29, 2012
Installed on Starcract islander, was sucking up water bad on fuel tank vents when on Lake Erie. I installed a set of these, have since been out on 4 to 5 footers, show no sighs of any water in fuel. Good product, well made.
(2 of 2 people found this review helpful)
Was this review helpful?
Tom by Thomas - Sellersburg, IndianaNovember 06, 2011
Looks Greats Works Perfect
(2 of 2 people found this review helpful)
Was this review helpful?
ANOTHER PERFECT JOB by Mark - Rosamond, CaliforniaJuly 12, 2011
I had to install a vent and this was the perfect choice. Fit, form and function are excellent.
(2 of 2 people found this review helpful)
Was this review helpful?
A Good replacement by Peter - Bradenton, FloridaJuly 29, 2013
N/A
Was this review helpful?
Works as Advertised by Robert - Oxnard, CaliforniaNovember 04, 2013
Hardest part about install was removing the old corroded vent. Recommend drilling it out rather than trying to unscrew it. Once the old unit was removed, reinstalling this replacement was a breeze. Another excellent experience with iboats.
Was this review helpful?
This product ships in 1 business day.

Add to Cart and enter your Postal Code to determine the shipping charges and estimated delivery date.
* Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies
Great Boating Days are Ahead!
Enjoy Extra Discounts 5-20% Off During the SPRING SAVINGS SALE!
Great Boating Days are Ahead!
Enjoy Extra Discounts 5-20% Off During the SPRING SAVINGS SALE!