SAVE NOW! on Great Fall Boating Specials.
Stock Up with a Boatful of Savings!

Attwood Flush Louvered Vent

Attwood
Flush Louvered Vent, Black - Attwood
Your Price: $10.54
Save: $2.45
(18% Off $12.99)
Part # 1423-5 ValueShip™ Eligible
Flush Louvered Vent, White - Attwood
Your Price: $11.99
Save: $2.90
(19% Off $14.89)
Part # 1425-5 ValueShip™ Eligible
Hurry! Only 1 left in stock
Flush Louvered Vent, Off-White - Attwood
Your Price: $13.38
Save: $3.91
(22% Off $17.29)
Part # 1424-5 ValueShip™ Eligible

Protect the collector box from rain and water spray using Attwood Flush Louvered Vent. It has built-in drain slots to prevent water accumulation and allow quick run off. This vent is made of ABS/ASA plastic for corrosion resistance and long-lasting use.

This vent can be easily installed, from inside or outside the hull, using screws. It comes in three different colors – black, white and off-white.

  • Deflects rain to protect the collector box
  • Made of ABS/ASA plastic
  • Drain slots prevent accumulation of water

Features of Attwood Flush Louvered Vent

  • Installs flush to the hull

Specifications

Manf. Part # 1423-5

  • Color: Black
  • Hole size: 2" x 15-1/4"

Manf. Part # 1425-5

  • Color: White
  • Hole size: 2" x 15-1/4"

Manf. Part # 1424-5

  • Color: Off-White
  • Hole size: 2" x 15-1/4"
Average Customer Review for Flush Louvered Vent, Black - Attwood
Full StarFull StarFull StarFull StarFull Star Based On 3 Reviews | Write Review
Full StarFull StarFull StarFull StarFull Starvents
by Fred from Randleman, North Carolina on July 27, 2015
Great service will buy more from them.
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarNice update
by Steve from Midland, Michigan on May 20, 2014
this product looks great and helped update the look of my boat! Thanks
Was this review helpful?
Full StarFull StarFull StarFull StarFull Starflush vent
by Robert from Eatonton, Georgia on December 28, 2013
Good looking vent and would done the job but the one I need had to be wider, That was my fault didn't measure right.
Was this review helpful?
Average Customer Review for Flush Louvered Vent, White - Attwood
Full StarFull StarFull StarFull StarFull Star Based On 6 Reviews | Write Review
Full StarFull StarFull StarFull StarFull StarFits Rinker boat
by TOM from Mountain Home, Arkansas on September 03, 2015
Theses are great. They fit my 1990 Rinker Captiva perfectly.
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarLouver Vent
by Maynard from Rome, New York on July 13, 2015
Perfect replacement. Excellent value.
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarLouver Vent
by Maynard from Rome, New York on July 11, 2015
Excellent replacement for a cracked vent. Shipped quickly. :-)
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarGood Job!
by Elroy from Scotrun, Pennsylvania on May 05, 2013
Vent was an exact match for the one it replaced and delivery was fast.
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Stargreat
by Cleo from Krebs, Oklahoma on May 30, 2012
product fit great. as measurement where right on.
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarVery nice!
by Paul from Salem, Ohio on May 29, 2012
Nice product fits and looks great. A little disappointing the four stainless screws didn't come with it. Needed them when they arrived so I had to pay more. Lost what I saved by ordering. Guess I should of asked first.
(1 of 1 people found this review helpful)
Was this review helpful?
Average Customer Review for Flush Louvered Vent, Off-White - Attwood
Full StarFull StarFull StarFull StarFull Star Based On 1 Review | Write Review
Full StarFull StarFull StarFull StarFull StarLouver
by Silby from Turlock, California on June 13, 2015
Just as described
Was this review helpful?
Q:
Can I get this in white, measuring 2 5/8 " x 17 1/2 "?
Q:
What size is the actual vent itself?
A:
Total length is 17-9/16". Total height is 2-3/4". Thickness I s 1/4". Open hole size is 2" x 15-1/4".
Q:
Can I get this in black measuring 17 1/8" x 2 1/2" ? The cut out is 16 1/16" x 2".?
A:
Unfortunately no. This is one of the only sizes we have, apart from these: http://www.iboats.com/Attwood-Flush-Louvered-Vent/dm/view_id.47926
Q:
Would these fit my 1988 bayliner capri?
A:
These are aftermarket so we cannot match it up by boat. We can only match it up by dimensions. 17-9/16"L x 2-3/4"W
Ask a question for
Question & Answer Guidelines
This product ships in 1 business day.
Add to Cart and enter your Postal Code to determine the shipping charges and estimated delivery date.
Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies
End of Summer Savings During our Huge Fall Boatful of Savings Sale - Stock Up Now & Save!