Attwood Products

Description: Medium (38") strap kit

Fits Battery Boxes: 9065, 9065A, 9067, 9082, 9069

• For 1-1/2" I.D. hose.
• Deck fills available with imprint to specify gas, water, or waste.
• Highly polished finish.
• Flush cap is slotted for separate key and features an O-ring that seals the cap watertight.
• Cap is attached by a stainless steel beaded chain.
• 3-1/4" long fill neck.
• Key sold separately.
• 66126 waste model has internal threads for pump-out nozzle.
• Use for vessels with built-in holding tanks.
• Note: Requires a bonding wire to prevent sparking when nozzle is inserted on gas model.
• Replacements for 66406, 66407, 66408 and 66408C1 only.

Each includes two 1/4"?28 cone-point set screws for connection to tubing. Three holes for #10 screws.

• Move more water and oxygen into livewell tanks to keep fish active
• Cooler-running motors, premium materials, watertight seals and waterproof wiring
• Cartridges are replaceable and interchangeable between bilge and aerator pumps

• Shatterproof 180 degree convex lens that eliminates blind spots.
• Compact and lightweight.
• Self-adjusting ball-socket joint secures mirror in desired location.
• Universal mount allows installation on either deck or windshields up to 3/4" thick.
• Adjusts to any position, any angle up or down or side to side.
• Gleaming ZAMAK with Perma-Plate chrome finish.
• Dimensions: 2-1/2"H x 7-5/16"L.

• For outboard boat models with conventional and walk-through windshields.
• Includes separate motor hood.

• For outboard boat models with conventional and walk-through windshields.
• Includes separate motor hood.
POLYESTER, V-HULL O/B, 19'L x 93" Beam Width. Blue.

• For outboard boat models with conventional and walk-through windshields.
• Includes separate motor hood.
POLYESTER, V-HULL O/B, 20'L x 96" Beam Width. Blue.

• For Skeeter, Ranger, Procraft, Hydra-Sports, Gamble, Sratos & other wide transom bass boats.
• Constructed for boats with trolling motors.
• Includes separate motor hoods.
POLYESTER COVER,TOURNAMENT BASS,16'8L x 84" Beam Width.

• For Skeeter, Ranger, Procraft,Hydra-Sports,Gambler, Sratos & other wide transom bass boats.
• Constructed for boats with trolling motors.
• Includes separate motor hoods.
POLY,TOURNAMENT BASS,17'6 L x 87" Beam Width. Blue.

• For square bow bass boats with larger motors and pedestal seats.
• Includes separarte motor hood.
POLYESTER, ALUMINUM BASS, 16' L x 76" Beam Width. Blue.

• For Skeeter, Ranger, Procraft, Hydra-Sports, Gambler, Stratos & other wide transom bass boats.
• Constructed for boats with trolling motors.
• Includes separate motor hoods.
POLYESTER, TOURNAMENT BASS 18'10"l X 90" Beam Width.

• Cover has unique, full cut design.
• Includes separate motor hood that fits larger motors.

• Cover has unique, full cut design.
• Includes separate motor hood that fits larger motors.

• For square bow bass boats with larger motors and pedestal seats.
• Includes separate motor hood.

• Fish & Ski & Pro Style Bass Boats.
• Center Length: 16'-18.5'.
• Beam Width: to 94".

• V-Hull, Tri-Hull, Runabouts, Aluminun & Bass Boats.
• Center Length: 14'-16'.
• Beam Width: to 90".
• Fabric: Titanium

• V-Hull Runabouts, (Except Cuddy Cabin Models).
• Center Length: 17'-19'.
• Beam Width: to 96".

• V-Hull Runabouts, (Except Cuddy Cabin Models)
• Center Length: 19'-21'.
• Beam Width: to 96".

• For horizontal rod position.
• The 3/8" diameter coated steel rod is tough, strong, and corrosion-resistant.
• U.V.-resistant plastic coating protects the rod butt and handle.
• The exposed stem and wing-nut are stainless steel for years of corrosion-resistant use.
• All holders include 5073 mounting base.
• 10° Angle, 4" Stem, for Multi-Purpose Rods and Fishing

• Holds coffee mugs with handles.
• Flip the small ring up to hold small drinks; flip the large ring up (small ring down) for large drinks.
• Flip both rings down and close for convenient storage.
• Polycarbonate construction.
• Pre-drilled with four holes for #10 screws.
• Open Sixe: 3/4"D x 9/16"W x 5/8"H.

• Convenient, interchangeable mounting bases are a hallmark of the Pro-Series, "2-In-1", and Mini Rigger systems.
• This base provides 360° lift-and-turn horizontal adjustment and fail-safe retention.
• The locking keyway prevents removal of a rod holder or Mini Rigger until it is turned directly inboard.
• Flush Mount Base mounts to gunwale or deck.
• Easy-open cover conceals fasteners, and elastomeric liner seals water out.
• When closed, the low-profile, contoured design avoids snagging line.