Attwood Products

Description: Medium (38") strap kit

Fits Battery Boxes: 9065, 9065A, 9067, 9082, 9069

• For 1-1/2" I.D. hose.
• Deck fills available with imprint to specify gas, water, or waste.
• Highly polished finish.
• Flush cap is slotted for separate key and features an O-ring that seals the cap watertight.
• Cap is attached by a stainless steel beaded chain.
• 3-1/4" long fill neck.
• Key sold separately.
• 66126 waste model has internal threads for pump-out nozzle.
• Use for vessels with built-in holding tanks.
• Note: Requires a bonding wire to prevent sparking when nozzle is inserted on gas model.
• Replacements for 66406, 66407, 66408 and 66408C1 only.

• Move more water and oxygen into livewell tanks to keep fish active
• Cooler-running motors, premium materials, watertight seals and waterproof wiring
• Cartridges are replaceable and interchangeable between bilge and aerator pumps

• For outboard boat models with conventional and walk-through windshields.
• Includes separate motor hood.

• For outboard boat models with conventional and walk-through windshields.
• Includes separate motor hood.
POLYESTER, V-HULL O/B, 19'L x 93" Beam Width. Blue.

• For outboard boat models with conventional and walk-through windshields.
• Includes separate motor hood.
POLYESTER, V-HULL O/B, 20'L x 96" Beam Width. Blue.

• For Skeeter, Ranger, Procraft, Hydra-Sports, Gamble, Sratos & other wide transom bass boats.
• Constructed for boats with trolling motors.
• Includes separate motor hoods.
POLYESTER COVER,TOURNAMENT BASS,16'8L x 84" Beam Width.

• For Skeeter, Ranger, Procraft,Hydra-Sports,Gambler, Sratos & other wide transom bass boats.
• Constructed for boats with trolling motors.
• Includes separate motor hoods.
POLY,TOURNAMENT BASS,17'6 L x 87" Beam Width. Blue.

• For square bow bass boats with larger motors and pedestal seats.
• Includes separarte motor hood.
POLYESTER, ALUMINUM BASS, 16' L x 76" Beam Width. Blue.

• For Skeeter, Ranger, Procraft, Hydra-Sports, Gambler, Stratos & other wide transom bass boats.
• Constructed for boats with trolling motors.
• Includes separate motor hoods.
POLYESTER, TOURNAMENT BASS 18'10"l X 90" Beam Width.

• Cover has unique, full cut design.
• Includes separate motor hood that fits larger motors.

• Cover has unique, full cut design.
• Includes separate motor hood that fits larger motors.

• For square bow bass boats with larger motors and pedestal seats.
• Includes separate motor hood.

• Fish & Ski & Pro Style Bass Boats.
• Center Length: 16'-18.5'.
• Beam Width: to 94".

• V-Hull, Tri-Hull, Runabouts, Aluminun & Bass Boats.
• Center Length: 14'-16'.
• Beam Width: to 90".
• Fabric: Titanium

• V-Hull Runabouts, (Except Cuddy Cabin Models).
• Center Length: 17'-19'.
• Beam Width: to 96".

• V-Hull Runabouts, (Except Cuddy Cabin Models)
• Center Length: 19'-21'.
• Beam Width: to 96".

• For horizontal rod position.
• The 3/8" diameter coated steel rod is tough, strong, and corrosion-resistant.
• U.V.-resistant plastic coating protects the rod butt and handle.
• The exposed stem and wing-nut are stainless steel for years of corrosion-resistant use.
• All holders include 5073 mounting base.
• 10° Angle, 4" Stem, for Multi-Purpose Rods and Fishing

• For installation on windshields 1/2" to 1" thick (or thinner with customer's own spacer)
• Provides an extra-wide glass lens for safe visibility. Molded plastic frame
• Polished convex lens and adjustable base
• Includes allen wrench
• 11-3/4" wide, 4" high
  
  
  

• An easy to use, secure design which holds coffee mugs with a handle, 12-ounce cans, or drink insulators
• Mounts quickly and easily on boats or RV's
• Flip the small ring up to hold small drinks
• For large drinks, flip the small ring down and use the large ring
• When not in use, flip both rings down and close the cover for convenient storage
• Polycarbonate construction
• Open dimensions: 4-3/4" deep x 4-9/16" wide x 4-5/8" high
• Closed depth: 7/8"
• Case is pre-drilled with four holes for #10 screws

• 90 Degree Round Bass
• Stainless Steel
• For 7/8" O.D. Tubing
• Base Size: 2-5/8"
• Each includes two 1/4" - 28 cone-point set screws for connection to tubing.
• Three holes for #10 screws.

Specifications

• Model No. T500
• Inlet Length: 3-1/2" L x 3/4"
• Inlet Thread Style: NPSM
• Outlet Style: Threaded 3/4"
• Wire/Connector: 29" wire

• Quasar™ 2-mile visibility.
• Efficient light output compact side lights meet domestic and international navigation light standards.
• Made from high impact UV stable black plastic.
• Easy to install, comes with 7" lead wires.
• Low profile Euro-style lights are only 1-7/16" high.

Specifications

• Model No. T800
• Inlet Length: 3-1/2" L x 3/4"
• Inlet Thread Style: NPSM
• Outlet Style: Threaded 3/4"
• Wire/Connector: 29" wire

• Mounts flush to gunwale or deck.
• Easy open cover conceals fasteners and elastomeric liner seals water out.
• When closed, low profile, smooth, contoured design avoids snagging lines.
• Comes in display packaging.

• Universal mount installs on dash or windshield
• Shatterproof, 180° convex mirror eliminates blind spots
• Mirror is compact and constructed of lightweight Perma-Plate zinc ZAMAK
• Mirror adjusts to any position up and down or side to side, then secures in desired location
• 7-5/16W x 2-1/2"H