4th of JULY SALE - Save an Extra 10-50% Off!
Fantastic Savings Everywhere!

Attwood Tsunami Manual/Cartridge Bilge Pumps 500, 800, 1200 GPH 12v

Attwood Tsunami Manual Cartridge Bilge Pump 500 GPH 3/4" Port 12v
Attwood Tsunami Manual Cartridge Bilge Pump 500 GPH 3/4" Port 12v
Your Price: $19.12
Save: $3.37
(14% Off $22.49)
Part # 4606-7 ValueShip™ Eligible
Attwood Tsunami Manual Cartridge Bilge Pump 800 GPH 3/4" Port 12v
Attwood Tsunami Manual Cartridge Bilge Pump 800 GPH 3/4" Port 12v
Your Price: $29.49
Save: $5.20
(14% Off $34.69)
Part # 4608-7 ValueShip™ Eligible
Attwood T1200 Manual Cartridge Bilge Pump 1200 GPH 1-1/8" Port 12v
Your Price: $39.34
Save: $5.55
(12% Off $44.89)
Part # 4612-7 ValueShip™ Eligible
Attwood

With immense power packed in a small package, the Attwood Tsunami Manual/Cartridge Bilge Pump makes cleaning out your boat bilge a breeze. Its compact design allows you to use it even in cramped bilges. The innovatively engineered system allows the bilge pump to deliver a high-efficient, high-capacity output off a compact setup. This bilge pump features a shaft seal that prevents leaking due to misalignment and damaged caulk while the tinned wiring prevents wicking and resists water damage and corrosion.

  • Compact design
  • High power
  • Patented shaft seal

This bilge pump is made of state-of-art materials to deliver reliable and durable use. It uses replaceable/interchangeable motor cartridges, ensuring convenient servicing. This bilge pump comes in different GPH ratings.

Features of Attwood Tsunami Manual/Cartridge Bilge Pump          

  • Compact design
  • Highly powerful operation
  • Patented shaft seal
  • Tinned wirings
  • State-of-art materials
  • Easily replaceable/interchangeable motor cartridges
  • Comes in different GPH values

Specifications for 500 GPH, Part # 4606-7

  • Rating: 500 GPH
  • Outlet style: Barbed
  • I.D: 3/4"
  • Voltage: 12 Volt

Specifications for 800 GPH, Part # 4608-7

  • Rating: 800 GPH
  • Outlet style: Barbed
  • I.D: 3/4"
  • Voltage: 12 Volt

Specifications for 1200 GPH, Part # 4612-7

  • Rating: 1200 GPH
  • Outlet style: Barbed
  • I.D: 1 1/8"
  • Voltage: 12 Volts
Full StarFull StarFull StarFull StarFull Star Based On 3 Reviews | Write Review
Full StarFull StarFull StarFull StarFull StarExcellent Product !!!
by Marvin from Marion, Iowa on June 16, 2015
Excellent quality product from a super source !!! Always enjoy doing business here with great customer service and super quick shipping of orders. Thank You !!!
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarBilige pump
by Don from old Town, Florida on June 10, 2015
Thank you for the pump and service will be doing business again with you
Was this review helpful?
Full StarFull StarFull StarFull StarFull Starpumped
by Aaron from Cleveland, Texas on October 10, 2013
Installed on a 14' jon boat with a slight leak. Dude, this beats the manuel bilge I used to have hands down. Will suck 2"-3" of water in less than 90 seconds.
(2 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star Based On 1 Review | Write Review
Full StarFull StarFull StarFull StarFull StarBass Hunter
by Darrin from Woodward, Oklahoma on May 12, 2014
Good product,worked fine,gets the water out if needed
(0 of 3 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star Based On 1 Review | Write Review
Full StarFull StarFull StarFull StarFull StarAttwood has always been a great product
by Barry from South Beach, Oregon on April 24, 2014
iboat service rates a 5 as per your rating scale. Will be ordering more from iBoats.com in the future.
(1 of 1 people found this review helpful)
Was this review helpful?
Q:
How many amps does 500 GPH draw?
A:
Amp draw according to Attwood is 1.8 for the 500.
Q:
What is the height and width of this pump and the 1200?
A:
Of the 500: top width is 2-7/8", bottom width is 2-3/4", overall width with outlet is 3-1/8". Total Height is 3-5/8". 1200: top width is 3-1/4" and bottom width is 3-1/8", overall width with outlet is 3-3/4". Height is 4-3/8".
Q:
Are the 800 and 1200 gpm to large for small aerators?
A:
Not necessarily. It's more by boat size. The bigger the boat the more GPH you're going to need because you will have more area to cover.
Q:
Would this pump work foe a 22.5' mastercraft maristar 225?
A:
Since this is an aftermarket part we do not have original information to match by boat. You will need to know size and GPH you require and if the hose size will work.
Ask a question for
Question & Answer Guidelines
This product ships in 1 business day.

Add to Cart and enter your Postal Code to determine the shipping charges and estimated delivery date.
* Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies
Gear up for Summer Boating.
Extra 10-50% Savings during the 4th of July Sale!