Universal, 3/8" ID x 6' - Attwood
Price: $25.89
Discontinued
Save: $19.10
(42% Off $44.99)
Part # 93806UUS7
2nd Day Air for $2 More Eligible
(Discontinued)
Universal Outboard Fuel Kit, 6' x 3/8" - Attwood
Price: $38.74
Save: $9.85
(20% Off $48.59)
Part # 93806ULP7
2nd Day Air for $2 More Eligible
SHIPS TODAY!* if ordered in 7 hrs 2 mins.
Universal Outboard Fuel Kit, 12' x 3/8" - Attwood
Price: $50.98
Save: $12.91
(20% Off $63.89)
Part # 93812ULP7
SHIPS TODAY!* if ordered in 7 hrs 2 mins.
Universal Outboard Fuel Kit, 6' x 5/16" - Attwood
Price: $44.30
Save: $11.29
(20% Off $55.59)
Part # 951606ULP7
SHIPS TODAY!* if ordered in 7 hrs 2 mins.
No Reviews
Universal Outboard Fuel Kit w/Fuel Demand Valve, 6' x 3/8" - Attwood
Price: $67.11
Save: $16.98
(20% Off $84.09)
Part # 93806UFDV7
2nd Day Air for $2 More Eligible
SHIPS TODAY!* if ordered in 7 hrs 2 mins.
No Reviews
Universal Outboard Fuel Kit w/Fuel Demand Valve, 12' x 3/8" - Attwood
Price: $80.18
Save: $20.31
(20% Off $100.49)
Part # 93812UFDV7
SHIPS TODAY!* if ordered in 7 hrs 2 mins.
No Reviews
Attwood
Average Customer Review for Universal, 3/8" ID x 6' - Attwood
Full StarFull StarFull StarFull StarFull Star
Based On 1 Review | Write Review
Full StarFull StarFull StarFull StarFull Star
Fuel hose
by Ivan from Staffordsville, Kentucky on August 16, 2012
A good replacement hose.
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Based On 1 Review | Write Review
Full StarFull StarFull StarFull StarFull Star
Fuel Hose
by Gary from Bainbridge, Georgia on December 01, 2016
I had a problem with the previous hose in that the hose had a liner inside the hose that when the end fitting was inserted, the liner came loose and almost blocked the hose. This caused quite a bit of troubleshooting because the outboard would not reach full RPMs. Problem was not evident just looking at the hose. I didn't find this until I replaced the hose because the bulb was starting to crack. This hose does not have the liner in it to cause this problem.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Based On 1 Review | Write Review
Full StarFull StarFull StarFull StarFull Star
Great upgrade for older fuel lines!
by Scott from Mexico, New York on July 24, 2014
My old (1988) original Force outboard fuel lines were damaged from ethanol fuel, which they were never designed for. Replaced/upgraded using this kit which includes new style dual layer primer bulb (pre-installed) and new male and female quick-connect tank fittings. Female fitting is pre-installed on fuel line, simply install (thread) male end into your new or existing fuel tank fitting and go! Be sure to use thread sealant on male fitting threads. No spray, but I personally recommend releasing pressure from tank by slowly unscrewing gas cap before connecting/disconnecting fuel line to prevent any spillage from tank pressure. Also purchased Attwood Fuel Demand Valve for a complete job, prevents tank pressure from flooding engine when turned off. Works great.
(1 of 1 people found this review helpful)
Was this review helpful?
Q:
Is the 3/8" dimension and ID or OD?
A:
It is inner diameter.


Q:
For what size hose?
A:
3/8" inner diameter hose.


Ask a question
Question & Answer Guidelines
This product ships in 1 business day.
Add to Cart and enter your Postal Code to determine the shipping charges and estimated delivery date.
Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies