Avenir Sport Bucket Seat, Tan & Yellow - Attwood

This product has been discontinued.
Avenir Sport is a great bucket seat for smaller cockpits.
  • Attractive, contemporary, and ergonomically styled seat features the patented SAS™ shock absorbing system.
  • The SAS spring grid suspension absorbs up to 4-G's of impact!
  • Flip-up bolster is ideal for applications where the boater needs the additional 7" of seat height for better vision during slow speed maneuvering or when the boat is off plane and it is difficult to see over the bow.
  • Marine grade vinyl upholstery.

Dimensions 22-1/4"W x 24"D x 21-7/8"H Patented SAS™ Shock Absorption

The Seating Comfort Boaters Have Been Demanding

Many developers have tried to reduce the shock that hull pounding transfers to a seated boater. With its unique resources, Attwood is the first to bring such an effective system to the recreational market at an affordable price.

SAS™ means "Shock Absorption System", and it is available exclusively in Avenir™, Avenir™ Sport, and Centric™ SAS™ seats from Attwood.

The SAS Quad-Spring™ suspension system is completely integrated within the seat pan - not bolted on, as are some systems. Four marine-grade coil springs stretch a stainless steel grid that supports and shapes the molded foam cushion in the seat pan. This suspension provides Dynamic Comfort while underway and Static Comfort when relaxing.

Spring Grid
Flexes with the coil springs and supports the seat foam. Continually adjusts for circulation and comfort.

Quad-Spring™ Suspension
Provides comfort and 3" travel for shock absorption. Prevents rider from "bottoming out."

Dynamic Comfort with SAS

The SAS seat pan suspends molded urethane foam over a spring-isolated grid. While underway, wave impact is absorbed by SAS suspension, not the boater.

  • Springs absorb energy and reduce shock.

  • Isolated suspension does not allow boater to bottom out against hard surface.

  • Impact is absorbed by the suspension system - not the boater.

Static Comfort

Even while idle and sitting still, the SAS suspension adds long-term comfort. Molded foam for SAS seats is thicker at the sides to give larger boaters extra support and "center" smaller boaters in middle of the seat.

Advanced Styling

Seat Shell and Molded Foam
Work together to provide ergonomic comfort and spinal support.

Arm Contour
Stylish curve supports arm in natural, comfortable position.

Side Cut-Away
Provides ventilation at lower back for cool comfort.

Bolster Down
Creates rounded edge at front of seat. When bolster is down the seat exceeds ABYC H-31 Type A Driver requirements.

Bolster Up
Detent holds bolster up at 102° angle with 7" height. Provides elevated seating for improved visibility when docking or maneuvering.

Recessed Bottom Angle
Rounded corners and recessed bottom angle minimize the bottom "footprint." Allows seat to swivel in confined spaces.

No Exposed Hinges
No ugly brackets or fasteners to color-match, pinch, or abrade.

Easy to Install ... Saves Assembly Time and Cost

Avenir™ seating can reduce upholstery and installation costs because it's refined to just four interlocking components. Avenir™ uses the marine-grade materials tested and proven in Centric™ SAS™ seats - thermoplastic shell and stainless steel suspension grid with corrosion-proof springs. It's all made possible by Attwood's unique qualifications for pleasure boat seating:

  • Plastic molding expertise
  • Years of experience in meeting the needs of boat builders

Seat Shell
All springs and molded-plastic components are built for the real marine world. Tough construction withstands abusive environments.

Upholstery Onsert
Once upholstered, provides a quick, easy method to cover staples and seams on the upholstered seat shell. Allows design flexibility and creates a deep-tuck, finished look.

Snap-in Clips
Onsert posts snap securely into foolproof clips for quick, easy assembly.

Flip-up Bolster
Flexes into keyed slots on the inside walls of seat shell. Cuts assembly cost because there are no brackets to color-match, assemble, or install.

SAS™ Seat Pan
Seat Pan has self-aligning posts that match pockets molded in the Seat Shell. T-Nuts in the Seat Pan match the universal bolt pattern of pedestal seat mounts and sliders. Fasteners from pedestal installation draw seat pan and shell together, forming a completed seat that exceeds tough ABYC H-31 Standards.

Add to Cart and enter your Postal Code to determine the shipping charges and estimated delivery date.
Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies