Beneteau Sailboats First 10R - Cruising Sailboat

2009 Beneteau Sailboats First 10R Standard Features

HULL
Hull and its structural grid are infused in one operation for a better strength/weight ratio, overall reduction in weight, and optimal weight control
Glass fibre/balsa/synthetic resin composite
Strengthened pressure points (keel, rudder, chain plates, deck line) reinforce the structure

DECK
Constructed by a closed molding injection system (glass fibre, balsa, synthetic resin sandwich) for better strength/weight ratio, finish & optimal insulation
All areas of working and maneuvering on deck are treated with a 'Picot' non-skid finish.
Solid reinforced areas are constructed at points under the deck fittings (winches, tracks, chain plates, cleats)

HULL/DECK JOINT
The hull/deck joint is secured in three ways: mechanically attached to the hull by screws fixing the teak toe rail; bonded to the hull (polyurethane adhesive) to guarantee better quality; and finishing joint guarantees water tightness of bonding

KEEL
Cast iron fin w/torpedo shaped lead bulb on bottom-hardened w/antimony to lower the center of gravity.
To increase life, keels are given an anti-corrosion treatment & improved finish before assembly, using epoxy based coatings and paint. The keel is fitted to the hull with high-resistance bonding as well as a system of bolts and stainless steel backing plates

SAFETY ON DECK
Swedish style SS open pulpit w/bi-color navigation light
... more