iboats - The #1 Store For Everything Boating  
Boat Parts & Accessories

Beneteau First 40 - Racer Cruiser Boat


These are 2010 boats. See current models at
New 2012 Beneteau - First 40 - Racer Cruiser

2010 Beneteau First 40 Description

The First 40 Combines the attributes of a sleek and sophisticated racer with all the comforts of a luxurious cruiser. Whether it's competing on the race course, or simply getting to the next harbor a lot faster than usual; the striking performance of her Farr Yacht Design hull and her powerful rig will deliver the "rush" you crave. Take the wheel. Make yourself comfortable on the slatted teak helmsman's position and prepare to unleash the adrenaline. Note the perfect view of the electronic instrumentation on the column. The cumulative effect is astonishing; she is quick, nimble and responsive. Knifing through the water, your crew takes in the generous cockpit space - appreciating the easy movement and the ideal angle of sheeting - for winning! Wide, almost level side decks, a highly efficient deck anti-slip design with grab rails immediately at hand - combined with a completely uncluttered foredeck all reflect in the creativity and design experience provided with this Beneteau/Farr collaboration. Stable and well-mannered, yet fast before the wind; the First 40 is surely one of the great secrets of what sailing is all about.
2010 Beneteau First 40 Specifications
Boat
  • Length Over All: 41 Feet and 3 inches.
  • Draft: 6 Feet and 4 inches.
  • Beam: 12 Feet and 9 inches.
  • Disaplacement: 16614
  • Fuel Tank Capacity: 36
  • Water Tank Capacity: 52
Engine


2010 Beneteau First 40 Standard Features


CONSTRUCTION
Hull constructed of hand-laid solid GRP bonded to a structural grid/hull liner of directional fiberglass/GRP for a strong, stiff, light composite. Vinylester hull barrier coat to resist osmotic blistering and zonespecific stitchmat laminates for specific increased strength optimization.
Deck constructed of Cored GRP sandwich construction for stiffness, thermal and acoustic insulation and lighter weight. Solid fiberglass reinforcements in high load areas. Integral unidirectional GRP deck beams for added strength. Main bulkheads bonded 360 to the hull and deck for rigid torsional and compression strength.

DECK EQUIPMENT RIGGING
Standard 9/10 anodized aluminum mast and boom, keel stepped with double spreaders
Rigid boom vang
DYFORM standing rigging
Single backstay w/hydraulic adjuster
Forestay grooved foil
Mainsheet traveler on cockpit sole with German mainsheet system
(2) Genoa sheet tracks w/lead cars adjustable from cockpit
Rigging run back to cockpit
Complete running rigging, genoa halyard low stretch
(2) twin-braided genoa sheets
genoa sheet trim tackle
... more
Be the first to write a review for this boat!





My iboats.com