Blue Sea Systems Si-Series Automatic Charging Relay

Blowout
Save 25% Off.*
Automatic Charging Relay, 120A 12/24V - Blue Sea Systems*
Sale Price: $81.91
Save: $28.08
(25% Off $109.99)
Part # 7610
Hurry! Only 1 left in stock
No Reviews | Write Review
7610 120 Amp SI-Series Automatic Charging Relay - Blue Sea Systems*
Sale Price: $81.91
Save: $28.08
(25% Off $109.99)
Part # 7610
No Reviews | Write Review
Low Price Guarantee
Automatically manages the charging of two battery banks and isolates batteries during starting to protect sensitive electronics. 120 Ampere continuous rating. Senses charging on two battery banks. Side and bottom knockouts for power cable connections. Clip-on cover insulates terminal connections. Clip-on cover insulates terminal connections. LED indicates ACR status. 1/4" x .031" male quick connect terminals for ground, optional remote LED and starting isolation. 7/8" stud length to accept multiple cable terminals. Start Isolation (SI) - temporary isolation of House loads from Engine circuit during engine cranking. 12/24V auto ranging voltage input.

Protects sensitive electronics by temporary isolation of house loads from engine circuit during engine cranking

  • Designed for 12 or 24 volt systems 12/24 volt auto ranging voltage input
  • Hermetically sealed contacts/vaporproof
  • Waterproof rated IP67—temporary immersion for 30 minutes
  • Ignition protected—safe for installation aboard gasoline powered boats
  • Remote LED output indicates relay state away from ACR
  • Supports high-output alternators up to 120 Amperes
  • Dual sensing
    Automatic Charging Relay, 120A 12/24V - Blue Sea Systems
    Automatic Charging Relay, 120A 12/24V - Blue Sea Systems
    Part # 7610
    Automatically manages the charging of two battery banks and isolates batteries during starting to protect sensitive electronics. 120 Ampere continuous rating. Senses charging on two battery banks. Side and bottom knockouts for power cable connections. Clip-on cover insulates terminal connections. Clip-on cover insulates terminal connections. LED indicates ACR status. 1/4" x .031" male quick connect terminals for ground, optional remote LED and starting isolation. 7/8" stud length to accept multiple cable terminals. Start Isolation (SI) - temporary isolation of House loads from Engine circuit during engine cranking. 12/24V auto ranging voltage input.

  • Protects sensitive electronics by temporary isolation of house loads from engine circuit during engine cranking
  • Designed for 12 or 24 volt systems
  • 12/24 volt auto ranging voltage input
  • Hermetically sealed contacts/vaporproof
  • Waterproof rated IP67—temporary immersion for 30 minutes
  • Ignition protected—safe for installation aboard gasoline powered boats
  • Remote LED output indicates relay state away from ACR
  • Supports high-output alternators up to 120 Amperes
  • Dual sensing

  • 7610 120 Amp SI-Series Automatic Charging Relay - Blue Sea Systems
    7610 120 Amp SI-Series Automatic Charging Relay - Blue Sea Systems
    7610

    120 Amp SI-Series Automatic Charging Relay


    • Allows temporary isolation of house loads from engine circuit during engine cranking to protect sensitive electronics
    • Automatically combines battery banks during the charging cycle and isolates under discharge
    • 12/24 Volt auto ranging voltage input
    • Waterproof rated IP67 - temporary immersion for 30 minutes
    • Ignition protected - safe for installation aboard gasoline powered boats
    • Remote LED output indicates relay state away from ACR
    • LED light indicates when batteries are combined
    • LED blinks in undervoltage lockout and starting lockout
    • Supports high-output alternators up to 120 Amperes
    • Included with the ADD A BATTERY Dual Circuit System
    • Automatically combines battery banks during the charging cycle and isolates under discharge
    • Ignition protected - safe for installation aboard gasoline-powered boats
    • Activates from any charging source - alternators, battery chargers, or solar panels
    • Hermetically sealed contacts / vaporproof
    • Side and bottom knockouts for power cable connections
    • Clip-on cover protects and insulates terminal connections
    • Tin-plated copper studs for maximum corrosion resistance
    • 7/8" (22.22mm) stud length to accept multiple cable terminals
    • 1/4" x 0.031" male quick connect terminals for ground and remote LED and starting interrupt
    • 3.5" H x 3.9" W x 2.0"D


  • No Review for Automatic Charging Relay, 120A 12/24V - Blue Sea Systems
    Be the first to Write a Review

    No Review for 7610 120 Amp SI-Series Automatic Charging Relay - Blue Sea Systems
    Be the first to Write a Review

    This product ships in 1 business day.

    To determine the shipping cost and estimated delivery date for this item click Add to Cart, then click Calculate Shipping inside your shopping cart.
    Standard Shipping Policies

    Please be careful when ordering this product, it has limitations that differ from our General 30-day Return Policy. After all, we want you to be satisfied with your order so you'll return again and again as an iboats.com customer, and to also recommend us to your boating friends

    Electronics/Software/Videos
    Electronics/Software/Videos are not returnable. Please be careful when ordering to choose the correct product.

    See our complete return policy.
    MEMORIAL DAY SPECIAL!
    Discounted 2nd Day Air - starting at only $5.55thru June 2nd
    Get Your Order FAST!
    MEMORIAL DAY SPECIAL!
    Discounted 2nd Day Air - starting at only $5.55thru June 2nd
    Get Your Order FAST!