1958 Repair Kit Boat Gel Coat Repair

Sort by Price : Low to High | High to Low
5 Items
 
Boston Whaler 1958-1972 White Color Boat Gel Coat Patch Paste Repair Kit - Spectrum Color
    Boat Manufacturer: MastercraftYears Covered: 1958-1972Color Family: WhiteColor Name: WhiteContainer Size: 2 oz Patch Paste Repair KitOEM Part Number: …
    List price: $28.35
    Your price:
    $24.95
    In stock
    View Details
    Match And Patch Kit
      Don’t let tiny nicks, scratches and gouges on your boat mar its looks. The Evercoat Match and Patch Kit has everything you need to repair any …
      List price: $63.76
      Your price:
      $50.01
      (3)
      In stock
      View Details
      Seacare Gelcoat Repair Kit
        List price: $54.16
        Your price:
        $42.48
        In stock
        View Details
        Evercoat Coloring Agents
          Popular gel-match coloring agents that blend with polyester resins, Gel-Paste, epoxy resins and Paint-A-Carpet. Use (1) tube per quart of resin.
          List price: $10.67
          Starting at:
          $8.57
          (7)
          In stock
          View Details
          Gel Coat Scratch Patch Kits
            Say goodbye to small scratches and chips on your fiberglass boat with the Evercoat Gel Coat Scratch Patch Kit. This kit features a one part formula …
            List price: $16.37
            Starting at:
            $13.16
            (1)
            In stock
            View Details
            Sort by Price : Low to High | High to Low
            5 Items
             
            Save on gallons and quarts!
            Spectrum Color
            Evercoat
            1. Prep the area removing all of the damaged gel coat Keep the repair as small as possible. Prep the damaged area with 220 grit sand paper. Sand down any rough edges. A Dremel tool or die grinder can also be used to prep the damaged area. Cracks must be ground out prior to applying patch paste.

            2. Begin by wiping the area clean with a acetone. Mix 10-12 drops of catalyst with 1 ounce(half a jar) of Spectrum Color factory color matched Patch Paste®. Fill the damaged area with the smooth drag. A second application may be necessary. After patch paste is cured, 1-2 hours sand and buff to finish.

            3. Mark the repair area with a grease pencil. This prevents over sanding. Sand the patch with a 220 grit sand paper. Sand only as much as necessary to remove the excess material and or the grease pencil’s color. Keep the block or sander flat to prevent a wavy patch. Repeat process with 400 and 600 grit paper.

            4. Buff the area with a mild compound to remove the 600-800 grit scratches. Repeat until the area is free of sanding scratches. Do not burn or over buff the area. This can discolor or remove all of the gel. Polish to a deep shine with a wax or glaze.
            September Savings! Enjoy deep discounts on thousands of clearance and winterizing items.