Pedestal Complete Kit Fixed Height Boat Seat Pedestals & Hardware

Sort by Price : Low to High | High to Low
17 Items
 
Plug-In™ Hi-Lo Pedestal Set (Springfield Marine)
    Hi-Lo 3 piece pedestal set with 9" diameter round base (1300751) and seat mount (1312700). This unique 2-position pedestal system allows the seat to …
    List price: $85.89
    Starting at:
    $67.65
    (2)
    In stock
    View Details
    Economy Fixed Height Pedestal (Springfield Marine)
      Standard seat mount, black. Steel. Perfect for car toppers, duck boats or any portable boat.
      List price: $22.69
      Starting at:
      $17.84
      In stock
      View Details
      Wise 2-3/8 Fixed Pedestals with Seat Mount Spiders
        Fixed height pedestal is constructed with polished anodized aluminum 2 3/8” tubing. Matched with WP95 Seat Mount to provide swivel and …
        List price: $65.99
        Starting at:
        $52.01
        (3)
        In stock
        View Details
        Garelick Fixed Height Seat Pedestal - Smooth Finish
          Planning to install a fixed height seat in your boat? The Garelick Fixed Height Seat Base with its smooth stanchion tube and wide base plate allows …
          List price: $119.99
          Starting at:
          $101.99
          (3)
          In stock
          View Details
          13 in Fixed Height LakeSport 2-3/8 Bell Pedestal with Seat Mount - Swivl-Eze
            13" High. Fixed Height Bell Pedestal with Seat Mount (Height Measured from Deck to Top of Seat Mount). ABYC Rating: AN - For all speeds in passenger …
            List price: $69.99
            Your price:
            $59.49
            (2)
            In stock
            View Details
            King Pin Type 11" Seat Pedestal Kit - Wise Boat Seats
              King Pin Type 11" Pedestal Kit All aluminum 11" brushed stanchion 360 degree Spring-loaded seat mount Quick release stanchion ABYC Class B - Seat …
              List price: $68.99
              Your price:
              $54.53
              In stock
              View Details
              Wise Fixed Height Steel Pedestals
                 These fixed height steel pedestals are simple, durable, and inexpensive; the perfect mix for any boater on a budget. Black powder coated steel …
                List price: $23.99
                Starting at:
                $18.21
                In stock
                View Details
                Wise 2-7/8 Fixed Pedestals with Seat Mount Spiders
                  Looking for quality fixed pedestals to set up your boat seats? Made of sturdy aluminum, the Wise 2-7/8 Fixed Pedestal is a good choice. This pedestal …
                  List price: $88.99
                  Starting at:
                  $69.59
                  (2)
                  In stock
                  View Details
                  Wise Fixed Height Locking Pedestals with Fore and Aft Slide
                     These Pedestals allows for custom positioning in both it's rotation, and it's fore and aft slide.  Serves as a great option for those …
                    List price: $119.99
                    Starting at:
                    $94.23
                    In stock
                    View Details
                    Hi-Lo Kingpin 3/4 3-Piece Package - Springfield
                      11″ Standard Post, Satin Finish Hi-Lo Swivel, E-Coat Finish 7″ x 7″ Standard Base, Satin Finish Below The Deck Mount, Requires A 2- …
                      List price: $85.39
                      Your price:
                      $67.25
                      In stock
                      View Details
                      3/4" Pin 3-Piece Boat Seat Kit - Seasense
                        SeaSense 3 piece seat kit includes: 50012622 - 11" seat post. 50012636 - seat mount. 50012638 - seat base.
                        List price: $64.29
                        Your price:
                        $54.65
                        (1)
                        In stock
                        View Details
                        Lock'n-Pin 3/4 Pedestal Package With 11" Post And 7x7 Base - Swivl-Eze
                          Package Includes 11" Brushed Aluminum Post Zinc Plated Seat Mount with Spring 7 x 7 SS Base Plate, Non-Threaded ABYC Rating: B - Not for speeds above …
                          List price: $70.19
                          Your price:
                          $56.79
                          (2)
                          In stock
                          View Details
                          Economy Pedestal 7 - Swivl-Eze
                            ECONOMY PEDESTAL Baked-on Black powder coated finish. Reinforced with washers welded at stress point. Offers exceptional durability.
                            List price: $22.29
                            Your price:
                            $17.69
                            In stock
                            View Details
                            Economy Pedestal 13 In Height - Swivl-Eze
                              Baked-on Black powder coated finish. Reinforced with washers welded at stress points. Offers exceptional durability. 13" fixed
                              List price: $25.29
                              Your price:
                              $20.09
                              (1)
                              In stock
                              View Details
                              SeaSense Economy Seat Pedestals
                                 SeaSense fixed mount Seat Pedestals are simple, inexpensive, and built to last. Steel constructed, black fixed seat pedestal. Use with swivel …
                                List price: $20.49
                                Starting at:
                                $18.33
                                In stock
                                View Details
                                Fixed Height Pedestal (Springfield Marine)
                                  The Springfield Explorer 2-3/8" Fixed Height Pedestal Set includes a rust-resistant post for durable use and a wide metallic base for solid …
                                  List price: $98.19
                                  Starting at:
                                  $68.93
                                  (2)
                                  In stock
                                  View Details
                                  Springfield Clipper 2-3/8 Boat Seat Pedestal Sets
                                    The Springfield Clipper Boat Seat Pedestal Set is an ideal choice for deck boats and pontoon boats. It features a sturdy post with a high-quality …
                                    List price: $99.99
                                    Starting at:
                                    $84.99
                                    In stock
                                    View Details
                                    Sort by Price : Low to High | High to Low
                                    17 Items
                                     
                                    Boating Know How

                                    Boat Seat Pedestal Safety

                                    When you are looking at replacement boat seat pedestals you will often see “Class AD” or “Type B” used to describe the seat hardware. What exactly do these classifications mean? ... read more ABYC Boat Seat Pedestal Standards
                                    Beginning in 1996 the American Boat & Yacht Council (ABYC) recommended seat hardware safety codes. These ABYC standards help boaters select safe seat pedestals for different applications around their boat.

                                    There are three boat seat pedestal classifications: Class AD (sometimes called AO), Class AP (sometimes called AN), and Class B. A designation of Class A designation (AD and AP) means it can be used while the boat is underway at any speed. Class B hardware should only be used on seats occupied while the boat is moving at 5 mph or less.

                                    Class AD hardware is designed to be used at a boat helm/driver position. To achieve this class it must meet the most stringent requirements as described below:
                                    • Must have positive locking swivels which withstand 150 ft. lbs. of torque
                                    • All seats interchangeable with the operator's seat must meet the requirements of this section
                                    • A seat designed for occupancy while the vessel is underway at any speed
                                    • Employ a locking mechanism for each plane or axis of movement
                                    • Seats with fore/aft adjustment must sustain static load of 300 lbs. for 3minutes, in mid position
                                    • Seats with a vertical adjustment feature shall have a positive locking mechanism
                                    • Sustain 10 impacts of 225 lbs.
                                    Boat Seat Pedestal
                                    Class AP pedestals are designed to be used while the boat is underway, but not in the driver position. This seat hardware for passenger boat seats must meet the following requirements:
                                    • Swivel locking mechanism must sustain torque of 30 ft. lbs.
                                    • A seat designed for occupancy while the vessel is underway at any speed
                                    • Employ a locking mechanism for each plane or axis of movement
                                    • Seats with fore/aft adjustment must sustain static load of 300 lbs. for 3 minutes, in mid position
                                    • Seats with a vertical adjustment feature shall have a positive locking mechanism
                                    • Sustain 10 impacts of 225 lbs.
                                    Fishing Seat Pedestal
                                    Class B seat hardware has the fewest requirements. This hardware is typically used on fishing seats and other seats that are not used while underway. It must only meet the following two requirements:
                                    • A seat designed for occupancy only at boat speeds not exceeding five miles per hour
                                    • Sustain dynamic loads at 1/2 the velocity required for Type A seats
                                    Boat seat pedestals from quality manufacturers will meet or exceed the ABYC standards for strength and safety. Grouping seat pedestals into the ABYC categories helps to keep boaters safe and also assist in narrowing the selection of boat seat hardware.
                                    read less
                                    Boat Seat Pedestals

                                    Boat Style Seat Pedestal Guide

                                    Guide to identifying the styles of boat seats and pedestals. ... read more
                                    Typical Pedestals & Seat Mount Brackets
                                    Seat Swivel Seat Swivels - available as both non-locking and locking.
                                    Jon Boat Clamp Jon Boat Clamps
                                    Quick Disconnects Quick Disconnect Brackets
                                    Removable Pedestals Removable Pedestals - Either Pin or Post type pedestals, if you can remove the pedestal from the floor base plate then these are used for all types of fishing boats. They can either be fixed or adjustable height. Pro Seats always have a 22" pedestal height or greater.
                                    Economy Seat Pedestals Black Steel Pedestals - These are inexpensive permanent mount seat pedestals.
                                    Permanent Pedestals Permanent Mount Pedestals - Either as fixed height or adjustable, these pedestals have a permanent mounting to the boat floor. The seat can be removed, but not the pedestal itself. They may also include a seat slide.

                                    Boat Styles

                                    Basic Fishing Boat - Usually 2-4 boat seats depending on the layout of the boat

                                    • Non-Locking & Locking Seat Swivels used on all folding boat seats
                                    • Jon Boat Clamps typically used on these boats
                                    • Quick Disconnect Brackets typically used on these boats
                                    • Removable Pedestals typically used on these boats
                                    • Black Steel Pedestals typically ONLY used on these boats
                                    • Permanent Pedestals sometimes used on these boats

                                    Typical Bass Boat - Driver, buddy & passenger seats as well as front & rear casting deck seats

                                    • Removable Pedestals typically used on these boats for the front & rear casting deck seats

                                    Typical Walleye Boat - 2-4 seats in the cockpit and may also have front casting deck seats

                                    • Removable Pedestals typically used on these boats for the front & rear casting deck seats, and sometimes for the driver & passenger seats
                                    • Permanent Pedestals used for the cockpit driver & passenger seats

                                    Typical Fish N Ski Boat - Can contains driver & passenger seats (bucket seats), front casting seats, 2 rear folding fishing seats, rear casting deck seat and center bench seat

                                    • Removable Pedestals typically used on these boats for the front & rear casting deck seats
                                    • Permanent Pedestals used for the driver & passenger seats

                                    Typical Runabout or Ski Boat - Contains driver & passenger seats. Newer boats have bucket seats. Older boats have lounge seats. Usually has 2 jump seats or a bench seat in the rear

                                    • Permanent Pedestals used for the driver & passenger seats

                                    Pontoon Boat - Has a driver bucket seat and may have other bucket seats, or fishing seats in the front and back

                                    • Removable Pedestals used only with front and rear fishing seats
                                    • Permanent Pedestals used for the driver seat and bucket seats in the front

                                    Saltwater Boat - Driver seat can be a bucket seat, or a swingback seat, or a helm chair

                                    • Locking Seat Swivels can be used on helm chairs
                                    • Permanent Pedestals are used when the driver and passenger seats are bucket or helm chairs

                                    read less
                                    How to identify my boat seat pedestal

                                    Seat Pedestal Identification

                                    There are four large manufacturers of boat seat pedestals: Garelick, Springfield, Swivl-Eze and Wise. All of these aftermarket manufacturers also supply OEM hardware to boat builders.< ... read more

                                    Pedestal components from different manufacturers have different tolerances and should not be mixed as it typically voids any warranties. For example, if you have a Swivel-Eze post you should only use a Swivel-Eze seat mount.

                                    Pedestal Size Springfield Swivl-Eze Garelick Wise Notes
                                    3/4" Pin KingPin - Standard Standard Pin Base

                                    KingPin - Threaded Threaded Pin Base
                                    Lock'N-Pin - Standard

                                    Lock'N-Pin - Threaded
                                    King Pin - Standard This is the only size where some manufacturers say brands can be mixed. 3/4" pedestal bases and posts can be either standard or threaded. Threaded bases have a deeper cup under the plate that houses the female threads. The standard, non-threaded base is shorter and only holds the bushing.
                                    1.77" Spring-Lock has a stainless steel post with mechanical lock on the bottom of post that locks into the base. Used mostly on Ranger Bass Boats and other premium brand bass boats.

                                    Clip-Lock has an aluminum post with a bushing on the bottom that expands inside the base for the unintentional detachment.

                                    Spring & Clip-Lock parts interchange. Snap-Lock Base
                                    Snap-Lock Series features a larger locking clip with a metal insert that allows the posts to lock into bases for added safety. Just press the button to release. Snap-Lock Base
                                    2" & 2-3/8" Taper-Lock, ideal for fishing boats, has been widely used by many top-name boat builders for years. Taper-Lock Base Wedge 2" & 2-3/8" bushing locks in with a tight, solid fit. Wedge Base Bases between brands often appear identical. However, slight tolerance variations may produce an improper fit if brands are interchanged. The brand of the base can often be found stamped underneath. Pedestal Base Brands
                                    2-3/8" Thread-Lock Series offers a great retrofit to any boat where a seat is needed and you don't want to go below deck. Low profile base with steady support. Thread-Lock Base

                                    Plug-In Series is Springfield's most common system for aluminum pontoon boats. Plug-In Base

                                    Permanent Pedestals such as the Clipper & Explorer.
                                    Lakesport Series is available as both a removable and a permanent pedestal.

                                    238 Series is available as both a removable and a permanent pedestal.

                                    Bases are interchangeable between these two series. Lakesport Base
                                    Permanent Pedestals This size is typically used for freshwater boats.

                                    Permanent Pedestals are most often sold as a complete package (base, post & seat mount) If replacing just the seat mount, it should be the same brand as the rest of the pedestal.
                                    2-7/8" Permanent Pedestals such as the Mainstay.

                                    Plug-In Series is occasionally found in this size.
                                    Seasport Series is a permanent bell pedestal. Permanent Pedestals Permanent Pedestals This size is typically used for saltwater boats.
                                    3-1/2" Permanent Pedestals
                                    4" Permanent Pedestals

                                    read less
                                    About Pedestals & Hardware

                                    Pedestals And Hardware For a Boat Seat

                                    Your boat seat starts on the deck. Practically every boat has one or more seats on it that require a mounting pedestal: fold down seats, pro seats, bucket seats, helm seats.

                                    Seat pedestals are made up of a base, post and seat mount. Swivels, slides, and additional hardware can be added depending on the features you want. There are several styles and sizes of boat seat pedestals to keep you comfortable and safe while boating.

                                    Seat pedestals have an ABYC (American Boat and Yacht Council) rating to help you determine which pedestals are safe for various positions on your boat. Type B rated boat seats are designed for low speeds under 5mph. These are perfect for fishing seats. Type A rated seat pedestals are designed to be used at any speed. Type A pedestals are split into driver and passenger position groups. Seat pedestals with this rating are great for bucket and helm seats.