Passenger Only Pedestal Mount Boat Seat Pedestals & Hardware

Sort by Price : Low to High | High to Low
5 Items
 
    Snaps into posts and locks for added securityE-coated for superior corrosion-resistance3° Tilt
    List price: $37.49
    Starting at:
    $24.76
    (2)
    In stock
    View Details
    Trac-Lock Swivel 2-7/8 Non-Locking - Springfield
      The Trac-Lock Is One Of The Most Popular Swivels Available. Functional, Dependable And Easy To Use. Used By Itself Or Combined With Any Of The Trac- …
      List price: $53.19
      Your price:
      $42.29
      In stock
      View Details
      Sale-a-palooza BIG Savings!
      2-3/8 Non-Locking Trac-Lock Seat Swivel - Springfield Marine
        Trac-Lock Swivel (1100031-1) For Use With Taper-Lock and Thread-Lock Pedestals High-Strength Aluminum With Powder Coated Finish 2-3/8″ Post …
        List price: $37.99
        Only $26.15
        (3)
        In stock
        View Details
        2-3/8 Seat Mount with Friction Control - Swivl-Eze
          Aluminum, with Friction Control, 3 degree tilt. Seat Mounts without Slider Installed. Height: 5/8". Wedge-shaped components slide in for a snug, …
          List price: $31.99
          Your price:
          $26.57
          (1)
          In stock
          View Details
          Sale-a-palooza BIG Savings!
          2-3/8 Trac-Lock Swivel - Springfield
            Trac-Lock Swivel (1100031-1) For Use With Taper-Lock and Thread-Lock Pedestals High-Strength Aluminum With Powder Coated Finish 2-3/8" Post Mount …
            List price: $45.99
            Only $34.88
            In stock
            View Details
            Sort by Price : Low to High | High to Low
            5 Items
             
            Seats & Hardware Extra 10% Off
            Springfield
             
            Swivl-Eze
            BackNext
            Ball Bearing Seat Swivel - Wise Boat Seats
            Only $7.60
            Save:$3.39 (30% Off)
            Ball Bearing Seat Swivel - Wise Boat Seats
             
            White Nylon Bushing For Alum. - Swivl-Eze
            Only $3.49
            Save:$0.90 (20% Off)
            White Nylon Bushing For Alum. - Swivl-Eze
             
            Bushing for 2-3/8 Post Seat Swivel - Springfi …
            Only $10.18
            Save:$5.31 (28% Off)
            Bushing for 2-3/8 Post Seat Swivel - Springfi …
            Sale-a-palooza BIG Savings!
             
            Offset Piano Type Hinge for Boat Seats - Wise …
            Only $6.97
            Save:$4.02 (36% Off)
            Offset Piano Type Hinge for Boat Seats - Wise …
            Stainless Steel Seat Support Swing Leg, 28.25 …
            Only $25.78
            Save:$8.71 (19% Off)
            Stainless Steel Seat Support Swing Leg, 28.25 …
            Sale-a-palooza BIG Savings!
             
            3/4 Seat Mount Zinc Plated Steel, 3 Degree Ti …
            Only $11.03
            Save:$2.86 (20% Off)
            3/4 Seat Mount Zinc Plated Steel, 3 Degree Ti …
             
            EDC Boat Seat Swivel - Seasense
            Only $6.93
            Save:$3.06 (20% Off)
            EDC Boat Seat Swivel - Seasense
            Sale-a-palooza BIG Savings!
             
            Stainless Steel Seat Support Swing Leg, 13&qu …
            Only $25.43
            Save:$8.56 (18% Off)
            Stainless Steel Seat Support Swing Leg, 13&qu …
            Sale-a-palooza BIG Savings!
            Hi-Lo Bushing for 2-3/8" Post - Springfi …
            Only $7.50
            Save:$2.89 (17% Off)
            Hi-Lo Bushing for 2-3/8" Post - Springfi …
            Sale-a-palooza BIG Savings!
             
            3/4" Pin Boat Seat Base 7" X 7" …
            Only $23.82
            Save:$11.17 (23% Off)
            3/4" Pin Boat Seat Base 7" X 7" …
            Sale-a-palooza BIG Savings!
             
            Bushing for 2-7/8 Post Seat Swivel - Springfi …
            Only $10.19
            Save:$5.30 (28% Off)
            Bushing for 2-7/8 Post Seat Swivel - Springfi …
            Sale-a-palooza BIG Savings!
             
            Kingpin Replacement Base Bushing - Springfiel …
            Only $5.05
            Save:$1.94 (17% Off)
            Kingpin Replacement Base Bushing - Springfiel …
            Sale-a-palooza BIG Savings!
            BackNext
            24" Fixed Height Seat Pedestal - Garelic …
            Only $303.89
            Save:$94.10 (17% Off)
            24" Fixed Height Seat Pedestal - Garelic …
            Sale-a-palooza BIG Savings!
             
            Gas Rise Adjustable 21.18"-25.18" H …
            Only $1162.79
            Save:$357.20 (15% Off)
            Gas Rise Adjustable 21.18"-25.18" H …
            Sale-a-palooza BIG Savings!
             
            Hi-Lo 15" Fixed Height 2-3/8 Plug-In Ped …
            Only $72.06
            Save:$21.83 (21% Off)
            Hi-Lo 15" Fixed Height 2-3/8 Plug-In Ped …
            Sale-a-palooza BIG Savings!
             
            7 x 7 KingPin and Thread-Lock E-Coated Swivel …
            Only $13.20
            Save:$4.29 (18% Off)
            7 x 7 KingPin and Thread-Lock E-Coated Swivel …
            Sale-a-palooza BIG Savings!
            Anodized Quad Seat Base - Garelick
            Only $239.08
            Save:$75.91 (17% Off)
            Anodized Quad Seat Base - Garelick
            Sale-a-palooza BIG Savings!
             
            Open Back Seat Hinges - Garelick
            Only $32.71
            Save:$10.28 (17% Off)
            Open Back Seat Hinges - Garelick
            Sale-a-palooza BIG Savings!
             
            Reinforcement Rings For Seat Bases - Garelick
            Only $74.96
            Save:$23.03 (15% Off)
            Reinforcement Rings For Seat Bases - Garelick
            Sale-a-palooza BIG Savings!
             
            Stanchion Deck Plate - Garelick
            Only $124.69
            Save:$38.30 (15% Off)
            Stanchion Deck Plate - Garelick
            Sale-a-palooza BIG Savings!
            Kingpin Replacement Brass Base Bushing - Spri …
            Only $5.65
            Save:$2.34 (18% Off)
            Kingpin Replacement Brass Base Bushing - Spri …
            Sale-a-palooza BIG Savings!
             
            3/4" Pin Boat Seat Base 4"x8", …
            Only $28.74
            Save:$9.25 (18% Off)
            3/4" Pin Boat Seat Base 4"x8", …
            Sale-a-palooza BIG Savings!
             
            Adjustable Boat Seat Pedestal - Seasense
            Only $25.34
            Save:$14.65 (28% Off)
            Adjustable Boat Seat Pedestal - Seasense
            Sale-a-palooza BIG Savings!
             
            15" Oak Footrest - Garelick
            Only $48.55
            Save:$24.44 (31% Off)
            15" Oak Footrest - Garelick
            Sale-a-palooza BIG Savings!
            BackNext
            Boating Know How

            Boat Seat Pedestal Safety

            When you are looking at replacement boat seat pedestals you will often see “Class AD” or “Type B” used to describe the seat hardware. What exactly do these classifications mean? ... read more ABYC Boat Seat Pedestal Standards
            Beginning in 1996 the American Boat & Yacht Council (ABYC) recommended seat hardware safety codes. These ABYC standards help boaters select safe seat pedestals for different applications around their boat.

            There are three boat seat pedestal classifications: Class AD (sometimes called AO), Class AP (sometimes called AN), and Class B. A designation of Class A designation (AD and AP) means it can be used while the boat is underway at any speed. Class B hardware should only be used on seats occupied while the boat is moving at 5 mph or less.

            Class AD hardware is designed to be used at a boat helm/driver position. To achieve this class it must meet the most stringent requirements as described below:
            • Must have positive locking swivels which withstand 150 ft. lbs. of torque
            • All seats interchangeable with the operator's seat must meet the requirements of this section
            • A seat designed for occupancy while the vessel is underway at any speed
            • Employ a locking mechanism for each plane or axis of movement
            • Seats with fore/aft adjustment must sustain static load of 300 lbs. for 3minutes, in mid position
            • Seats with a vertical adjustment feature shall have a positive locking mechanism
            • Sustain 10 impacts of 225 lbs.
            Boat Seat Pedestal
            Class AP pedestals are designed to be used while the boat is underway, but not in the driver position. This seat hardware for passenger boat seats must meet the following requirements:
            • Swivel locking mechanism must sustain torque of 30 ft. lbs.
            • A seat designed for occupancy while the vessel is underway at any speed
            • Employ a locking mechanism for each plane or axis of movement
            • Seats with fore/aft adjustment must sustain static load of 300 lbs. for 3 minutes, in mid position
            • Seats with a vertical adjustment feature shall have a positive locking mechanism
            • Sustain 10 impacts of 225 lbs.
            Fishing Seat Pedestal
            Class B seat hardware has the fewest requirements. This hardware is typically used on fishing seats and other seats that are not used while underway. It must only meet the following two requirements:
            • A seat designed for occupancy only at boat speeds not exceeding five miles per hour
            • Sustain dynamic loads at 1/2 the velocity required for Type A seats
            Boat seat pedestals from quality manufacturers will meet or exceed the ABYC standards for strength and safety. Grouping seat pedestals into the ABYC categories helps to keep boaters safe and also assist in narrowing the selection of boat seat hardware.
            read less
            Boat Seat Pedestals

            Boat Style Seat Pedestal Guide

            Guide to identifying the styles of boat seats and pedestals. ... read more
            Typical Pedestals & Seat Mount Brackets
            Seat Swivel Seat Swivels - available as both non-locking and locking.
            Jon Boat Clamp Jon Boat Clamps
            Quick Disconnects Quick Disconnect Brackets
            Removable Pedestals Removable Pedestals - Either Pin or Post type pedestals, if you can remove the pedestal from the floor base plate then these are used for all types of fishing boats. They can either be fixed or adjustable height. Pro Seats always have a 22" pedestal height or greater.
            Economy Seat Pedestals Black Steel Pedestals - These are inexpensive permanent mount seat pedestals.
            Permanent Pedestals Permanent Mount Pedestals - Either as fixed height or adjustable, these pedestals have a permanent mounting to the boat floor. The seat can be removed, but not the pedestal itself. They may also include a seat slide.

            Boat Styles

            Basic Fishing Boat - Usually 2-4 boat seats depending on the layout of the boat

            • Non-Locking & Locking Seat Swivels used on all folding boat seats
            • Jon Boat Clamps typically used on these boats
            • Quick Disconnect Brackets typically used on these boats
            • Removable Pedestals typically used on these boats
            • Black Steel Pedestals typically ONLY used on these boats
            • Permanent Pedestals sometimes used on these boats

            Typical Bass Boat - Driver, buddy & passenger seats as well as front & rear casting deck seats

            • Removable Pedestals typically used on these boats for the front & rear casting deck seats

            Typical Walleye Boat - 2-4 seats in the cockpit and may also have front casting deck seats

            • Removable Pedestals typically used on these boats for the front & rear casting deck seats, and sometimes for the driver & passenger seats
            • Permanent Pedestals used for the cockpit driver & passenger seats

            Typical Fish N Ski Boat - Can contains driver & passenger seats (bucket seats), front casting seats, 2 rear folding fishing seats, rear casting deck seat and center bench seat

            • Removable Pedestals typically used on these boats for the front & rear casting deck seats
            • Permanent Pedestals used for the driver & passenger seats

            Typical Runabout or Ski Boat - Contains driver & passenger seats. Newer boats have bucket seats. Older boats have lounge seats. Usually has 2 jump seats or a bench seat in the rear

            • Permanent Pedestals used for the driver & passenger seats

            Pontoon Boat - Has a driver bucket seat and may have other bucket seats, or fishing seats in the front and back

            • Removable Pedestals used only with front and rear fishing seats
            • Permanent Pedestals used for the driver seat and bucket seats in the front

            Saltwater Boat - Driver seat can be a bucket seat, or a swingback seat, or a helm chair

            • Locking Seat Swivels can be used on helm chairs
            • Permanent Pedestals are used when the driver and passenger seats are bucket or helm chairs

            read less
            How to identify my boat seat pedestal

            Seat Pedestal Identification

            There are four large manufacturers of boat seat pedestals: Garelick, Springfield, Swivl-Eze and Wise. All of these aftermarket manufacturers also supply OEM hardware to boat builders.< ... read more

            Pedestal components from different manufacturers have different tolerances and should not be mixed as it typically voids any warranties. For example, if you have a Swivel-Eze post you should only use a Swivel-Eze seat mount.

            Pedestal Size Springfield Swivl-Eze Garelick Wise Notes
            3/4" Pin KingPin - Standard Standard Pin Base

            KingPin - Threaded Threaded Pin Base
            Lock'N-Pin - Standard

            Lock'N-Pin - Threaded
            King Pin - Standard This is the only size where some manufacturers say brands can be mixed. 3/4" pedestal bases and posts can be either standard or threaded. Threaded bases have a deeper cup under the plate that houses the female threads. The standard, non-threaded base is shorter and only holds the bushing.
            1.77" Spring-Lock has a stainless steel post with mechanical lock on the bottom of post that locks into the base. Used mostly on Ranger Bass Boats and other premium brand bass boats.

            Clip-Lock has an aluminum post with a bushing on the bottom that expands inside the base for the unintentional detachment.

            Spring & Clip-Lock parts interchange. Snap-Lock Base
            Snap-Lock Series features a larger locking clip with a metal insert that allows the posts to lock into bases for added safety. Just press the button to release. Snap-Lock Base
            2" & 2-3/8" Taper-Lock, ideal for fishing boats, has been widely used by many top-name boat builders for years. Taper-Lock Base Wedge 2" & 2-3/8" bushing locks in with a tight, solid fit. Wedge Base Bases between brands often appear identical. However, slight tolerance variations may produce an improper fit if brands are interchanged. The brand of the base can often be found stamped underneath. Pedestal Base Brands
            2-3/8" Thread-Lock Series offers a great retrofit to any boat where a seat is needed and you don't want to go below deck. Low profile base with steady support. Thread-Lock Base

            Plug-In Series is Springfield's most common system for aluminum pontoon boats. Plug-In Base

            Permanent Pedestals such as the Clipper & Explorer.
            Lakesport Series is available as both a removable and a permanent pedestal.

            238 Series is available as both a removable and a permanent pedestal.

            Bases are interchangeable between these two series. Lakesport Base
            Permanent Pedestals This size is typically used for freshwater boats.

            Permanent Pedestals are most often sold as a complete package (base, post & seat mount) If replacing just the seat mount, it should be the same brand as the rest of the pedestal.
            2-7/8" Permanent Pedestals such as the Mainstay.

            Plug-In Series is occasionally found in this size.
            Seasport Series is a permanent bell pedestal. Permanent Pedestals Permanent Pedestals This size is typically used for saltwater boats.
            3-1/2" Permanent Pedestals
            4" Permanent Pedestals

            read less

            Pedestals And Hardware For a Boat Seat

            Your boat seat starts on the deck. Practically every boat has one or more seats on it that require a mounting pedestal: fold down seats, pro seats, bucket seats, helm seats.

            Seat pedestals are made up of a base, post and seat mount. Swivels, slides, and additional hardware can be added depending on the features you want. There are several styles and sizes of boat seat pedestals to keep you comfortable and safe while boating.

            Seat pedestals have an ABYC (American Boat and Yacht Council) rating to help you determine which pedestals are safe for various positions on your boat. Type B rated boat seats are designed for low speeds under 5mph. These are perfect for fishing seats. Type A rated seat pedestals are designed to be used at any speed. Type A pedestals are split into driver and passenger position groups. Seat pedestals with this rating are great for bucket and helm seats.


            Sale-a-palooza BIG Savings!
            Only $303.89
            Savings: $94.10
            Compare at: $397.99
            24" Fixed Height Seat Pedestal - Garelick
            Sale-a-palooza BIG Savings!
            Only $1162.79
            Savings: $357.20
            Compare at: $1519.99
            Gas Rise Adjustable 21.18"-25.18" Height Commander II 4.0 Seat Pedestal - Garelick
            Sale-a-palooza BIG Savings!
            Only $72.06
            Savings: $21.83
            Compare at: $93.89
            Hi-Lo 15" Fixed Height 2-3/8 Plug-In Pedestal Set - Springfield Marine
            Sale-a-palooza ends July 31st - Shop now for the best selection and savings!