FINAL DAYS for Labor Day Sale Savings! Upgrade to 2nd Day Air for only $2 more*

Bushing (Swivl-Eze)

Swivl-Eze
Bushing - 1 Pc. - Swivl-Eze
Your Price: $4.46
Save: $1.13
(20% Off $5.59)
Part # P30006
SHIPS TOMORROW!* if ordered in 16 hrs 18 mins.
White Nylon Bushing For Alum. - Swivl-Eze
Your Price: $3.63
Save: $0.96
(20% Off $4.59)
Part # SP201 ValueShip™ Eligible
SHIPS TOMORROW!* if ordered in 16 hrs 18 mins.

Are you worried about replacing the old and rusted components of the pedestal? Get the Swivl-Eze Seat Pedestal parts and do not let the damaged parts spoil your fun. This replacement bushing slides in to provide a snug and stable fit.

  • Bushing for aluminum base and post
  • Replacement part
  • Snug and stable fit

Features of White Nylon Bushing

  • Designed for aluminum bases & posts      
  • Color: White

Manf. Part # SP201

  • Tube outer diameter: 1¼"
  • Tube inner diameter: ¾"
  • Overall length with flange: 2½"

Features of Adapter Bushing 1.77x3/4

  • Enables 1.77" pin posts to fit 3/4" pin

Manf. Part # SP-14000

  • Fits: ¾" pin bases
Average Customer Review for Bushing - 1 Pc. - Swivl-Eze
Full StarFull StarFull StarFull StarHalf Star Based On 5 Reviews | Write Review
Full StarFull StarEmpty StarEmpty StarEmpty Starseat base insert
by Alan from Jacksonville, Florida on July 28, 2015
Not an acceptable replacement for the original. Too small to fit snugly into hole. Seat base fit fine into adapter but adapter doesn't fit snugly enough into the pedestal base to keep from rocking around makes riding in that seat a little uncomfortable. There are two products on the iboats website that possibly could work, I have bought both of them and neither worked for what I needed. one was a little too big and the other one is a little too small, how hard can it be to get replacement of the original from the manufacture.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Starworks well
by Larry from Morehead, Kentucky on March 31, 2015
This plastic bushing did the job. It appears to be the exact bushing that it replaced. Seats are without wobble and are much s ier. Saved me the expense replacing the base and the standard. These bushings make it a little difficult to remove the seats but no more than when the boat was new.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Starworks well
by Larry from Morehead, Kentucky on March 31, 2015
This plastic bushing did the job. It appears to be the exact bushing that it replaced. Seats are without wobble and are much more solid. Saved me the expense replacing the base and the standard. These bushings make it a little difficult to remove the seats but no more than when the boat was new.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Starworks well
by Larry from Morehead, Kentucky on March 31, 2015
This plastic bushing did the job. Appears to be the exact bushing that it replaced. Seats are without wobble and are much s ier. Saved me the expense replacing the base and the standard. These bushing make it a little difficult to remove the seats but no more than when the boat was new.
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Starworks well
by Larry from Morehead, Kentucky on March 31, 2015
This plastic bushing did the job. It appears to be the exact bushing that it replaced. Seats are without wobble and are much more s y. Saved me the expense replacing the base and the standard. These bushings make it a little difficult to remove the seats but no more than when the boat was new.
(0 of 1 people found this review helpful)
Was this review helpful?
Average Customer Review for White Nylon Bushing For Alum. - Swivl-Eze
Full StarFull StarFull StarFull StarHalf Star Based On 17 Reviews | Write Review
Full StarFull StarFull StarEmpty StarEmpty Starthe photo is not what was received. This is the white piece inside of the pedestal risers.
by Alan from Jacksonville, Florida on July 02, 2015
the photo is not what was received. This is the WHITE piece inside of the pedestal risers. what i needed was the BLACK inserts for the pedestal plate, they are black not white. similar product just different diameter, slightly bigger. ground it down to make it fit, but after i hammered it in, the seat would not go into the hole. after all that, put in trash can.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Starjust what I needed. perfect
by Jill from Moses Lake, Washington on June 04, 2015
worked perfectly
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarReview
by Charles from Fate, Texas on May 06, 2015
The product was as advertised. However it did not fit the pedestal that I have. It needs to be wider to fit my swivel eze pedestal. One and a half inch opening.
Was this review helpful?
Full StarFull StarFull StarEmpty StarEmpty StarIf you don't Have tools buy the brass.
by Leon from Harrison, Arkansas on May 05, 2015
This bushing is very difficult to install. If you don't have the tools to modify it, go with the brass bushing. I think this is for the seat post.
Was this review helpful?
Full StarEmpty StarEmpty StarEmpty StarEmpty Starextra part not need for me, sorry
by Richard from Ogallala, Nebraska on April 29, 2015
not knowing if 3 sets were required. This one is NOT for a springfield seat. So 1 star is not fair for this #201, I just did not know how to get the right busing set for a springfield seat, so ordered all three bushings, but only need 2, and they worked GREAT to make the seats enjoyable to sit in again.
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty StarWhite Nylon Bushing
by Ricky from Fayetteville, Arkansas on April 23, 2015
These look as if they are exact replacements for my boat. Before removing old ones and installing these I made sure they fit the pedestal and the were tight but fit. Once I installed these they were actually too tight. Had to force the pedestal/seat into the bushing. At which time I could not remove it. I had to remove base and then drive out the pin. Then I removed the bushing. The bushing has raised runners which I removed these about 1/2 way up from the bottom, then reinstalled them. Now they are still tight but I am able to install and remove the seat. even though it is more work remove the ribs/ridges a little at time so you do not remove too much.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Starworked just fine , order was prompt
by David from Cranehill, Alabama on April 07, 2015
took A little bit of shaving, fit just fine.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Starthanks for the quick response this is how it should work
by Boyce from Cooper, Texas on February 24, 2015
your comments request is confusing is service your are looking for or general comments like the product is correct and worked well
Was this review helpful?
Full StarFull StarFull StarFull StarFull Starnylon insert
by Brent from Cordele, Georgia on June 08, 2014
Product was not as pictured but fit perfectly.
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarJust what I was looking for.
by Wanda from Flat Rock, North Carolina on April 08, 2014
The bushing was a little tight fit and makes it a little hard to pick the seat up for travel, however, it tightened the pedestal enough it took all the wobble out when fishing which is a good thing. Very pleased with the product.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Starnylon bushing
by Danny from Stella, North Carolina on September 21, 2013
Been looking to replace my damaged bushing with a home made device...it was great to find an exact replacement and a good price...thanx
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarWhite bushing
by Ronald from Lexington, Kentucky on May 14, 2013
Just what I needed to fix my pedestal. Took a little trimming but worked out fine.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Stargood stuff
by Dale from Pleasant View, Utah on November 28, 2012
this insert came quick and works good
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarBushing
by Wayne from Booneville, Mississippi on September 21, 2012
Perfect fit, Just what I needed, and very fast shipping.
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarBoat seat pedestal bushing
by George from Waco, Texas on June 30, 2012
Even though the description states white which conflicts with the picture, it did arrive as white and was the proper bushing for my Atwood seat pedestal
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty StarBushing for swivel seat
by Ralph from Highland, California on August 29, 2011
very tight fitting and had to ream them out before I could use. But other than that great product
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Stardavepool
by David from Memphis, Tennessee on July 31, 2011
Photo doesn't match product, but the product is what I wanted.
(1 of 1 people found this review helpful)
Was this review helpful?
Q:
What is the od of the bushing. part#30006?
A:
The outer diameter of this bushing is 1-3/10".
Q:
What is the procedure for removing old bushing? can it be removed without press?
A:
According to Attwood/Swivl-Eze, you can just take a pipe and a hammer and pound out the bushing from the other side.
Q:
Do you carry a 1 1/2 inch bushing for a Swivl-Eze?
A:
We don't have it listed, but if you contacted at Attwood and gave them your pedestal number they might be able to give you the part number you need.
Q:
I need the black bushing that fits in the base plate?
A:
According to Attwood, for a 3/4" black bushing you will need #P340. For a possible special order please call the number at the top of the page.
Q:
I have a 1.77" pedestal. Is this the correct replacement bushing for this size pedastal? Do I need an adapter bushing to go with this part?
A:
This would fit with that type of pedestal, yes. As for the adapter bushing, it depends on what you intend to do with it.
Ask a question for
Question & Answer Guidelines
This product ships in 1 business day.
Add to Cart and enter your Postal Code to determine the shipping charges and estimated delivery date.
Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies
End of Summer Savings During our Huge Fall Boatful of Savings Sale - Stock Up Now & Save!