CDI Piercing Probe Set

Piercing Probe 511-33 Digital Multimeter - CDI Electronics (21% Off $150.00)

No Reviews | Write Review

Digital Multimeter Same as the 511-33A, but does not include the 511-9773 Peak reading adapter.

Piercing Probe 511-33A CDI Electronics Multimeter - CDI Electronics (21% Off $224.00)

No Reviews | Write Review

Digital Multimeter w/DVA Adapter Handy sized Auto-ranging multimeter features DC & AC volts from 0.1milli-volt to 600 volts, ohms, diode & continuity beeper, micro-amp, milli amp (400mA MAX) and amps (10 amps MAX). Includes the 511-9773 Peak Reading Adapt

Piercing Probe 511-60 Digital Multimeter - CDI Electronics (21% Off $296.00)

No Reviews | Write Review

Digital Multimeter Same as the 511-60A, but does not include the 511-9773 Peak reading adapter.

Piercing Probe 511-60A CDI Electronics Multimeter - CDI Electronics (21% Off $366.00)

No Reviews | Write Review

Digital Multimeter w/DVA Adapter Auto-ranging multimeter features DC & AC volts from 0.1milli-volt to 1000 volts, ohms, diode & continuity beeper, micro-amp, milli amp (400mA MAX) and amps (10 amps MAX), temp probe allows you to check engine temperature.

Piercing Probe 511-9773-NL without Leads, DVA, Peak Voltage, Adapter - CDI Electronics (20% Off $108.00)

No Reviews | Write Review

Part # 511-9773NL
DVA (Peak Voltage) Adapter Same as the 511-9773, but without test leads. Standard multimeters test leads plug right in.

Piercing Probe 511-9772 Ampmeter Adapter - CDI Electronics (20% Off $90.00)

No Reviews | Write Review

DC Ampmeter Adapter Recommended for use with digital multimeters. Range 1 to 400 amps as 1 millivolt to 4 volts. Extension harness is available (511-9788E).

Piercing Probe 511-9788B Noise Filter Adapter - CDI Electronics (20% Off $94.00)

No Reviews | Write Review

2 cycle noise filter used with Fluke 88 meter with RPM pickup, P/N 518-RMP80, to reduce outboard noise interference for inductive pickup applications.

Piercing Probe 511-TL10 Electronics Test Leads - CDI Electronics (20% Off $34.00)

No Reviews | Write Review

Test Lead Set Recommended for use with multimeters probes. Set contains one Red and One Black test lead.

Piercing Probe 518-61 Infrared Thermometer - CDI Electronics (21% Off $332.00)

No Reviews | Write Review

Laser Quick, Fluke Tough Just press the green button and the Fluke 61 comes alive. Targeting objects is easy with the bright laser beam. Even in the dark, the display is simple to read with the quality backlit screen. After the mesurement is done, you can

Piercing Probe 518-80PK-22 Immersion Type-K Probe, -320°F to 1994°F - CDI Electronics (21% Off $190.00)

No Reviews | Write Review

(-320°F to 1994°F) For engine coolant, brake and transmission fluid, other liquids. General purpose probe with Suregrip handles for immesion in liquids such as coolant, brake fluid and power steering. Protected by Inconel sheath. Range: -320°F to 1994°F (

Piercing Probe 518-80PK-24 Air Type-K Probe, 320°F to 1500°F - CDI Electronics (21% Off $236.00)

No Reviews | Write Review

(320°F to 1500°F) Probe has Suregrip handles for better handling control. For exhaust gas or air conditioning. For measuring exhaust temperature (gasoline and diesel), air conditioning and heater outlet register, temperatures and engine induction system a

Piercing Probe 518-i-1010 1A to 1000A AC/DC Probe - CDI Electronics (21% Off $808.00)

No Reviews | Write Review

Part # 518-i1010
Heavy duty current measurements, up to 1000 Amps, with high accuracy. Converts Fluke DMMs into a 1000 amp current meter. Dual Hall-effect AC/DC probe clamps around any battery cable. Large jaw (1.25"�, 3.3cm) big enough to clamp around any battery cable.
Range: 1 to 1000 amps DC, 2% basic accuracy. 200 hours typical battery life with two AAA batteries (supplied). Probe is warranted for one year.

Piercing Probe 518-i-410 5A to 400A AC/DC Probe - CDI Electronics (21% Off $498.00)

No Reviews | Write Review

Part # 518-i410
Measure starting and charging current up to 400 Amps Converts Fluke DMMs into a 400 amp clamp-on amp meter. Hall-effect AC/DC probe is rated to 400 amps within rated specs (to 600 amps with less accuracy). Large jaw (1.25"�; 3.3cm) easily fits around battery cables. Range: 5 amps to 400 amps with +5% basic accuracy, usable to 600 amps. 600 hours typical battery life with two AAA batteries (supplied). Probe is warranted for one year.

Piercing Probe 518-TL220 63" Test Leads Set - CDI Electronics (21% Off $152.00)

No Reviews | Write Review

(Comes With TP220 & AC220) Versatile leads; interchangeable tips; work with other probe tips too. Suggested for automotive, electrical and HVAC applications. Set consists of silicone-insulated TL222 Flexible Test Leads (one red and one black), stainless-s

Piercing Probe 518-TL222 63" Right-Angle Silicone Test Leads - CDI Electronics (20% Off $60.00)

No Reviews | Write Review

Silicone-insulated; won't crack from cold, or melt from an exhaust manifold. Silicone rubber insulated leads stay flexible at -112�F (-80�C), won't melt at 302�F (150�C). 385 internal strands for flexibility prevent kinks and bends in test leads; superior strain relief is also provided. Compatible with all meters accepting safety-shrouded, standard-sized banana plugs. One red and one black, 63" (1.6m). Best suited for test clips with plunger-style jaws (AC220 Industrial Clips, AC283 Pin Grabber Clips, AC289 Insulation Piercing Clip). 1000V (Heavy Industrial Rating), Over-voltage Category III per IEC 1010-1, 10A rating. Shrouded right-angle connectors on both ends. UL 1244 Listed. One year warranty.

Piercing Probe 518-TL224 63" Right-Angle/Straight Silicone Test Leads - CDI Electronics (20% Off $60.00)

No Reviews | Write Review

Same as TL222 except that one end has a shrouded, straight connector Best suited for pointed end test probes (TP20 Industrial Test Probes) or standard jaw test clips (AC75 Banana Jack Alligator Clips, AC285 Large Jaw Alligator Clips). One red and one blac

Piercing Probe 518-TP220 Test Probe - CDI Electronics (20% Off $40.00)

No Reviews | Write Review

(For use with TL222 & TL224) Extra Sharp! Extra Strong! Very sharp,extra-long .750"� (19mm) stainless steel tip. For reaching deep test points or recessed components; will pierce insulation. 1000V per IEC 1010-1, Over-voltage Category III (Heavy Industrial Rating), 10A rating. One red and one black. Compatible with all test leads having standard, 4mm (.16"), 8mm (.315") safety shrouds. UL 1244 Listed. One year warranty.

Piercing Probe Set - CDI Electronics (20% Off $122.00)

No Reviews | Write Review

Part # 511-9770
No need to disconnect harness or wires. Fully insulated probes have a spring loaded clamp with tiny stainless steel pin that self centers and punctures the insulation. (Hole will normally reseal itself when wire heats up). Ideal for taking DVA readings on all engines and Jet Drive systems. This set is highly recommended for use with all meters and peak reading adapters.