CMC PT-130 Hydraulic Tilt and Trim

Browse larger images

CMC POWER TILT AND TRIM APPLICATION DATA
Engine Make	Horse Power Range	Years	Tilt and Trim Unit
Mercury Outboard	40-125 HP	All	PT-130
Mariner Outboard	40-125 HP	All	PT-130
Evinrude Outboard	40-130 HP	All	PT-130
Johnson Outboard	40-130 HP	All	PT-130
Force Outboard	40-130 HP	All	PT-130
Chrysler Outboard	40-130 HP	All	PT-130
Honda Outboard	40-130 HP	All	PT-130
Yamaha Outboard	40-130 HP	All	PT-130
Suzuki Outboard	40-115 HP	All	PT-130
Nissan/Tahatsu Outboard	40-125 HP	All	PT-130

For Motors from 5-35 HP we recommend the CMC PT-35 Hydraulic Tilt and Trim. Click here for details.

For all other motors over 130 HP we recommend the CMC Hydraulic Jack Plate. Click Here for details.

Electric Hydraulic Tilt N' Trim

You Get Power Tilt & Trim, Better Boat Handling, More Speed, Lower Fuel Consumption and No More Back Strain! With the touch of a switch you can raise your motor to protect your prop from damage and your back from strain. It's especially convenient on pontoon boats.

Marine Electrical Hydraulic System
The Electric Hydraulic System is totally waterproof and is rated over 7800 lbs. of thrust! This system is made of 100% non-ferrous material which makes it more impervious to saltwater and freshwater.

Incredible Durability.
The CMC Power Tilt and Trims are made of 6061 T6 alloy aluminum extrusions and fastened with stainless steel fasteners for maximum strength and durability. No welds or castings (molded aluminum) to break. CMC is the only manufacturer offering a 5-year structure warranty.

This HYDRAULIC ACTUATOR is completely self-contained with its own fluid reservoir (eliminates the need for hydraulic pump, tank and hoses inside the boat). It contains a permanent magnet motor for more power and R.P.M. The 2" diameter cylinder within the actuator has 40% more lifting capacity than most other after market tilt and trims on the market. It contains a non-leak seal and wiper seal that keeps dirt and water out of the working parts.

Experience Convenience & Improved Performance. The CMC Power Tilt and Trims allow you to tuck your motor in to get your boat on plane smoother and faster. When you're underway, you can change the angle of your motor to obtain the best performance for your load and water conditions. It gives you a more stable ride, increases top end speed, more prop clearance and better fuel efficiency.

The optional tilt and trim gauge (not available with the PT-35) is sealed and drip proof and mounts in the dash of the boat for safe and convenient height determination and makes it very easy to know the exact angle of your motor. The sending unit is completely sealed and waterproof, which eliminates any moisture problems. The up-down toggle switch is standard equipment.

PT-130

90 Degrees of Tilt and Trim. The PT-130 will allow you to tilt your motor a total of 90 degrees. This is especially important to those who store their boat in the water. Now they can tilt their motor up and completely remove their lower unit from the water!

Superior Construction The PT-130 is a computer aided design, our commitment to quality and manufacturing excellence is evident in every product we make.

Most Powerful On The Market. Over 40% more powerful than other brands. PT -130 FEATURES:

Rated for 130 H.P; and Smaller Motors.
6" Set Back to Enhance Boat Stability and enables the prop to get a better "bite" at a higher prop setting.
20� of Trim and a Total of 90� of Tilt and Trim. You can completely remove their lower unit from the water for water storage!
1/2" 6061 T6 Extruded Aluminum Construction with Stainless Steel Fasteners.
Electric Hydraulic Actuator Rated at 7853 lbs. of Thrust!
Standard B.I.A. Bolt Hole Pattern.
Convenient Adapter Kit Available for Clamp-on Motors.
Four Stainless Steel Motor Mounting Bolts Included.
No electromechanical ball screw!

Transom Clamp Motor Adapter

For installation of motors mounted with transom clamps, an adapter kit is available. This adapter kit is made for quick and easy installation of these type motors. The transom clamp adapter will only be need with the PT-130

"The PT-130 works like a dream and the performance is great! Now I can go fishing by myself and load my boat without ruining the prop in shallow water."
Corky C. - Missouri

"At the lake I was somewhat hesitant at first to use the throttle too hard or too fast. After a while, I did everything possible to test the unit. I couldn't be more pleased and satisfied with it's performance,"
Russ S. - India

PT-130 W/O Gauge

Part # 13002
PT-130 FEATURES:

Rated for 130 H.P. and Smaller Motors
6" Set Back to Enhance Boat Stability and Performance
20� of Trim and a Total of 90� of Tilt and Trim
1/2" 6061 T6 Extruded Aluminum Construction with Stainless Steel Fasteners
Electric Hydraulic Actuator Rated at 7853 lbs. of Thrust!
Standard B.I.A. Bolt Hole Pattern
Convenient Adapter Kit Available for Clamp-on Motors
Four Stainless Steel Motor Mounting Bolts Included

PT-130 W Gauge

Part # 13001
PT-130 FEATURES:

Rated for 130 H.P. and Smaller Motors
6" Set Back to Enhance Boat Stability and Performance
20� of Trim and a Total of 90� of Tilt and Trim
1/2" 6061 T6 Extruded Aluminum Construction with Stainless Steel Fasteners
Electric Hydraulic Actuator Rated at 7853 lbs. of Thrust!
Standard B.I.A. Bolt Hole Pattern
Convenient Adapter Kit Available for Clamp-on Motors
Four Stainless Steel Motor Mounting Bolts Included

Transom Clamp Motor Adapter

Part # 13022
For installation of motors mounted with transom clamps, an adapter kit is available from CMC.This adapter kit is made for quick and easy installation of these type motors.

This product typically leaves our warehouse in 1 business day.

To determine the shipping cost and estimated delivery date for this item click Add to Cart, then click Calculate Shipping inside your shopping cart.

General Policy

We work hard to provide you with the best value in product prices and shipping charges, and to get your order to you in a timely, safe, and convenient manner. Internet sales involve the cost of getting the product to you, and shipping carriers base that cost on the size and weight of the package, plus the distance the package travels from our warehouse to your door. We keep our product prices low, negotiate low shipping charges from our carriers and pass those savings on to you, and we don't charge sales tax (except for residents of Utah), so your order from iboats.com is the best value for all your boating needs.

Our standard shipping method is UPS ground, which typically takes 2-5 additional transit days after the order has left our warehouse, depending on your delivery address. We also offer other shipping options, including expedited delivery, and the actual delivery date will depend on the shipping options you choose.

Shipping to Canada

Most products sold by iboats.com can be purchased and shipped to Canada. Some restrictions apply to certain items, such as hazardous materials, over-weight products, and the method of shipping. Available product lines, shipping rates and fees may vary depending on the delivery address for your order.

Currently, iboats.com offers ground shipping to all Canada provinces. Our Canadian brokerage service accelerates your orders through the Customs clearance process and facilitates the delivery of your order through Canada Post or the best method based on your shipping address. We do not currently offer expedited shipping methods to Canada.

At iboats.com we want to simplify your transaction and give you a pleasing purchasing experience so you'll come shop with us again and again. We therefore calculate all the duties, taxes, and other fees specific to Canadian orders and show you the total landed cost of getting the order to your door. There are no hidden fees and will be no surprise COD charges when the package is delivered to you.

Order History & Tracking

We provide several methods to track your order and keep you informed of your order status and expected delivery date. After completing an iboats.com purchase transaction, an account will automatically be created for your provided email address. You'll receive an email from iboats.com Customer Service informing you of your new User Account and the many benefits it provides. If you don't wish to have an iboats.com Account with password, do nothing and your account won't be registered; however, you can respond to the instructions in the email and easily register your account and setup a password. This will allow you to sign in to your account by choosing the Order Status link from any iboats.com page, where you can browse your order history and track the status of all your orders - tracking numbers are displayed that link to the delivery carrier's tracking webpage.

If you have provided your email address during checkout, we will also email you your invoice, which includes a link for tracking your order and viewing the current status of your order. Refer to your invoice email and tracking link any time you wish to track the status of your order

If the merchandise you received was defective, damaged, or an error was made by iboats.com, simply return the merchandise within 30 days of the original shipping date for a full refund.
See the specific requirements and instructions below for United States or Canadian orders.

CMC, Cook Manufacturing: All CMC products are subject to a 20% restocking charge

See our complete return policy.

Copyright © 1999-2008 iboats, inc. All rights reserved iboats.com \| Directory \| Marine Store \| Boats for Sale \| Forums \| Boat Manufacturers \| Boat Parts Manufacturers \| Boat Motors Contact iboats \| Site Terms of Use \| Online Privacy Practices \| Legal Notices