iboats - The #1 Store For Everything Boating
Product Search

Shop By Manufacturer

Happy Holidays

$441.15 - CMC PT-35 Hydraulic Tilt and Trim - PT-35
Compare at $519.00
Part # 52100
CMC

CMC POWER TILT AND TRIM APPLICATION DATA
Engine Make Horse Power Range Years Tilt and Trim Unit
Mercury Outboard 5-35 HP All PT-35
Mariner Outboard 5-35 HP All PT-35
Evinrude Outboard 5-35 HP All PT-35
Johnson Outboard 5-35 HP All PT-35
Force Outboard 5-35 HP All PT-35
Chysler Outboard 5-35 HP All PT-35
Honda Outboard 7.5-35 HP All PT-35
Yamaha Outboard 6-35 HP All PT-35
Suzuki Outboard 9.9-35 HP All PT-35
Nissan/Tahatsu Outboard 9.9-35 HP All PT-35

For Motors from 40-130 HP we recommend the CMC PT-130 Hydraulic Tilt and Trim. Click here for details.

For all other motors over 130 HP we recommend the CMC Hydraulic Jack Plate. Click Here for details.

Electric Hydraulic Tilt N' Trim

You Get Power Tilt & Trim, Better Boat Handling, More Speed, Lower Fuel Consumption and No More Back Strain! With the touch of a switch you can raise your motor to protect your prop from damage and your back from strain. It's especially convenient on pontoon boats.

Marine Electrical Hydraulic System
The Electric Hydraulic System is totally waterproof and is rated over 7800 lbs. of thrust! This system is made of 100% non-ferrous material which makes it more impervious to saltwater and freshwater.

Incredible Durability.
The CMC Power Tilt and Trims are made of 6061 T6 alloy aluminum extrusions and fastened with stainless steel fasteners for maximum strength and durability. No welds or castings (molded aluminum) to break. CMC is the only manufacturer offering a 5-year structure warranty.

This HYDRAULIC ACTUATOR is completely self-contained with its own fluid reservoir (eliminates the need for hydraulic pump, tank and hoses inside the boat). It contains a permanent magnet motor for more power and R.P.M. The 2" diameter cylinder within the actuator has 40% more lifting capacity than most other after market tilt and trims on the market. It contains a non-leak seal and wiper seal that keeps dirt and water out of the working parts.

Experience Convenience & Improved Performance. The CMC Power Tilt and Trims allow you to tuck your motor in to get your boat on plane smoother and faster. When you're underway, you can change the angle of your motor to obtain the best performance for your load and water conditions. It gives you a more stable ride, increases top end speed, more prop clearance and better fuel efficiency.

The optional tilt and trim gauge (not available with the PT-35) is sealed and drip proof and mounts in the dash of the boat for safe and convenient height determination and makes it very easy to know the exact angle of your motor. The sending unit is completely sealed and waterproof, which eliminates any moisture problems. The up-down toggle switch is standard equipment.

PT-35

Hydraulic tilt & trim with no castings or welds to break. Don't settle for less quality imitations! The PT-35 is a lighter, more compact Tilt and Trim unit manufactured for 35 horsepower motors and smaller(Down to 2 H.P.). The PT-35 utilizes the same hydraulic actuator as the PT-130 and gives you all the same benefits. This unit easily adapts to bolt-on motors and clamp-on motors (*within the 11 inch frame) without the need of an adapter.

PT-35 FEATURES:
  • Rated for 35 H.P; and Smaller Motors.
  • 5 1/2" Set Back to Enhance Boat Stability and enables the prop to get a better "bite" at a higher prop setting.
  • 84° of Trim and Tilt.
  • 1/4" 6061 T6 Extruded Aluminum Construction with Stainless Steel Fasteners.
  • Electric Hydraulic Actuator Rated at 7853 lbs. of Thrust!
  • Accommodates Clamp-on or Bolt- on Motors Without the Need of an Adapter.
  • Weighs Only 24 Pounds!

* The inside dimension of the motor mounting area of the PT-35 is II inches. Before ordering, please make sure that the maximum width of the clamp mounting feet and/or mounting bolts of the motor that must fit into this area does not exceed this II inch limit. Refer to the transom view drawings. Mounting bolts are not included with the PT-35.

Transom Clamp Motor Adapter

For installation of motors mounted with transom clamps, an adapter kit is available. This adapter kit is made for quick and easy installation of these type motors. The transom clamp adapter will only be need with the PT-130

"I just installed a PT-35 Trim & Tilt with help of a friend, and had no trouble at all, in fact I was amazed at how easy it was! I have a 30 H.P. Honda long shaft outboard and the tilt works great!"
Lonnie S. - Minnesota

"At the lake I was somewhat hesitant at first to use the throttle too hard or too fast. After a while, I did everything possible to test the unit. I couldn't be more pleased and satisfied with it's performance,"
Russ S. - India

CMC PT-35 Hydraulic Tilt and Trim PT-35
PT-35
Part # 52100
  • PT-35 Power Tilt & Trim Rated for 35 H.P. and Smaller Motors
  • 5 1/2" Set Back to Enhance Boat Stability and Performance
  • 84° of Trim and Tilt
  • 1/4" 6061 T6 Extruded Aluminum Construction with Stainless Steel Fasteners
  • Electric Hydraulic Actuator Rated at 7853 lbs. of Thrust!
  • Accommodates Clamp-on or Bolt-on Motors Without the Need of an Adapter
  • Weighs Only 24 Pounds!
  • uses 1/2" stainless steel bolts

This product typically leaves our warehouse in 1 business day.

To determine the shipping cost and estimated delivery date for this item click Add to Cart, then click Calculate Shipping inside your shopping cart.

General Policy

We work hard to provide you with the best value in product prices and shipping charges, and to get your order to you in a timely, safe, and convenient manner. Internet sales involve the cost of getting the product to you, and shipping carriers base that cost on the size and weight of the package, plus the distance the package travels from our warehouse to your door. We keep our product prices low, negotiate low shipping charges from our carriers and pass those savings on to you, and we don't charge sales tax (except for residents of Utah), so your order from iboats.com is the best value for all your boating needs.

Our standard shipping method is UPS ground, which typically takes 2-5 additional transit days after the order has left our warehouse, depending on your delivery address. We also offer other shipping options, including expedited delivery, and the actual delivery date will depend on the shipping options you choose.

Shipping to Canada

Most products sold by iboats.com can be purchased and shipped to Canada. Some restrictions apply to certain items, such as hazardous materials, over-weight products, and the method of shipping. Available product lines, shipping rates and fees may vary depending on the delivery address for your order.

Currently, iboats.com offers ground shipping to all Canada provinces. Our Canadian brokerage service accelerates your orders through the Customs clearance process and facilitates the delivery of your order through Canada Post or the best method based on your shipping address. We do not currently offer expedited shipping methods to Canada.

At iboats.com we want to simplify your transaction and give you a pleasing purchasing experience so you'll come shop with us again and again. We therefore calculate all the duties, taxes, and other fees specific to Canadian orders and show you the total landed cost of getting the order to your door. There are no hidden fees and will be no surprise COD charges when the package is delivered to you.

Order History & Tracking

We provide several methods to track your order and keep you informed of your order status and expected delivery date. After completing an iboats.com purchase transaction, an account will automatically be created for your provided email address. You'll receive an email from iboats.com Customer Service informing you of your new User Account and the many benefits it provides. If you don't wish to have an iboats.com Account with password, do nothing and your account won't be registered; however, you can respond to the instructions in the email and easily register your account and setup a password. This will allow you to sign in to your account by choosing the Order Status link from any iboats.com page, where you can browse your order history and track the status of all your orders - tracking numbers are displayed that link to the delivery carrier's tracking webpage.

If you have provided your email address during checkout, we will also email you your invoice, which includes a link for tracking your order and viewing the current status of your order. Refer to your invoice email and tracking link any time you wish to track the status of your order

CMC, Cook Manufacturing
All CMC products are subject to a 20% restocking charge
  • If the merchandise you received was defective, damaged, or an error was made by iboats.com, simply return the merchandise within 30 days of the original shipping date for a full refund.
  • See the specific requirements and instructions below for United States or Canadian orders.

See our complete return policy.
Click here for more info
Click here for more info

iboats.com | Directory | Marine Store | Boats for Sale | Forums | Boat Manufacturers | Boat Parts Manufacturers | Boat Motors
Contact iboats | Site Terms of Use | Online Privacy Practices | Legal Notices