Cabo Yachts 40 Flybridge - Motor Yacht
These are 2008 boats. See current models at
New 2009 Cabo Yachts - 40 Flybridge - Motor Yacht
New 2009 Cabo Yachts - 40 Flybridge - Motor Yacht
2008 Cabo Yachts 40 Flybridge Description
The Cabo 40 Flybridge benefits from the uncanny ability of Cabo engineers to give a boat the ride of a much larger boat with the agility of a smaller vessel. Built on a hull designed by Michael Peters for the Cabo 40 Express, the 40 Flybridge is destined to be the fastest in the fleet of current sportfishermen in the 40-foot range. Before your boat was put into production, did the builders run the boat with the steering disconnected? Did they add and remove running strakes? Or change chine angles? The majority of builders don't bother. Cabo does all of this and more to assure that its new models are introduced only when everything is right. Before the first 40 hull ever hit the water, a scale model was tank tested. What did the engineers find? That the 40 hull ran a little faster with more strakes. So Cabo added strakes. They discovered that the least amount of spray hit the top-sides when the chines were molded at a 10 degree downward angle. So they altered the chines. And when the first hull was ready for testing, Cabo disconnected the steering at sea and allowed the rudders to set themselves- the best way to determine just how much toe-in or toe-out they need to achieve perfectly straight tracking. Net results? The 40 hull has proven to be fast, dry and comfortable and runs straight when you let go of the wheel.2008 Cabo Yachts 40 Flybridge Specifications
Boat
- Length Over All: 42 Feet and 10 inches.
- Draft: 3 Feet and 5 inches.
- Beam: 15 Feet and 9 inches.
- Fuel Tank Capacity: 550
- Water Tank Capacity: 95
Engine
2008 Cabo Yachts 40 Flybridge Standard FeaturesHull ·Boot striping – choice of colors ·Bottom paint, complete preparation – 2 coats epoxy, 2 coats anti-fouling paint; black, standard ·Molded fiberglass construction using premium vinylester resins and biaxial stitched fabric reinforcement; solid fiberglass bottom construction; core construction from chine to sheer ·Premium quality molded-in white gelcoat finish ·Stainless steel rub strip on face of white high-density PVC rub rail ·Trim tabs, fully recessed Deck ·Anchor roller assembly, custom, recessed, stainless steel ·Bow cleats, 12" stainless steel ·Bow pulpit, integral molded fiberglass ·Custom deck rails, aluminum or polished stainless steel (up-charge for stainless) ·Deck surface, molded-in, non-skid ·Molded fiberglass using polyester resin, biaxial stitched fabric reinforcement and core construction ·Molded-in white gelcoat finish ... more Premium midsize convertible chews up the waves as well as the competition. Principal features include gorgeous styling, upscale two-stateroom interior, roomy cockpit with large-capacity livewell, rigging center, in-deck fish/storage boxes, engineroom access door. Centerline helm position affords excellent sightlines in all directions. Note near standing headroom in engine compartment, generous fuel tankage. Cat 700hp diesels cruise in the high 20s (34 35 knots top). Expensive, but worth the cost.
This information is provided by the PowerBoat Guide, the #1 buyer's guide to late model powerboats, 26' to 85' in length. Click here to get your own copy of the PowerBoat Guide.
Be the first to write a review for this boat!
| ||||||||||






