Captain's Varnish (Pettit)

 
Captain's Varnish 1015, Pint - Pettit (Kop Coat) - Pettit Paint
Your Price: $17.58
Save: $13.91
(44% Off $31.49)
Part # 1015P ValueShip™ Eligible
No Reviews | Write Review | Ask Question
Pettit Paint
Features:
  • Recommended for the highest quality work
  • Outstanding gloss retention and all around durability.
  • Contains UV absorbers for long-term gloss retention.

High solids marine varnish recommended for the highest quality work. Outstanding gloss retention and durability. Contains Ultra-violet Absorbers and filters. The largest selling varnish in the USA. Use Thinner 120.

General Description
Considered the traditional standard in the marine industry, this varnish is highly regarded for its reliable service, versatile application and tough yet flexible durability. It is blended with phenolic and alkyd resins and tung and linseed oils for excellent performance. It's warm, light amber hue will enhance the rich, classic brightwork appearance.

Application Information
Do not shake varnish. Stir gently before application, being careful not to introduce air bubbles into the varnish. Z*Spar 1015 Captain's Varnish may be applied by brush, conventional or airless spray. Thinning is not normally required although on warm days use Pettit 120/T10 Brushing Thinner at 5- 10% by volume to ease brushing and maintain good flow and levelling. In very warm weather (80°F and above) use Pettit 110/T11 Brush Flo Thinner at 5-10% by volume to maintain good flow and levelling. When spraying, use Pettit 121/T8 Spraying Thinner up to 20% by volume. Spray one even, wet coat to minimize orange peel. Do not apply in heavy films or build coats too quickly as solvent entrapment, blistering or wrinkling may occur. Do not apply Captain's Varnish on extremely humid days or when rain is threatening. Do not apply in the late afternoon when working outdoors as the wet film may be adversely affected by dew. DO NOT apply this varnish to a wood hull which has been dried more than one week under conditions such as artificial heat. Do not use Captain's Varnish below the waterline on boats that remain in the water. The moisture content of the wood should be a minimum of 15% when varnished. This will eliminate expansion cracking, micro-checking and gloss loss when the varnish is in service.

Surface Preparation
Wood must be clean, dry and properly prepared prior to varnishing. When sanding wood, always sand with the grain. Use a vacuum, air hose, or tack rag to remove all traces of sanding residue. Follow all surface preparation steps carefully, avoiding shortcuts. Inadequate surface preparation will virtually assure inadequate varnish performance.

Disclaimer: Charts apply to Interlux products only. The information provided is not intended to be exhaustive. Because iboats.com does not know how this information is being used, they cannot take responsibility for any actions as a result.

The performance of marine paint depends on many factors outside the control of iboats.com, including surface preparation, proper application, and environmental conditions. Therefore, iboats.com cannot guarantee this product's suitability for your particular purpose or application.

By purchase or use of this product, buyer agrees that the sole and exclusive remedy, if any, is limited to the refund of the purchase price or replacement of the product at iboats.com's option.

Ask a question for
Question & Answer Guidelines
This product ships in 1 business day.

Add to Cart and enter your Postal Code to determine the shipping charges and estimated delivery date.
* Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies