Refine Parts List
Eng./Model:

Eng./Model

Cyl.

Mfg. Code

Carburetor Model

Carburetor

Sierra Carburetor Kit w/o Metering Rods

Mallory Carburetor Kit w/o Metering Rods

A & B (1942-55) 4 Z-1 63M 8963 18-7732 -
K (1942-56) 4 Z-1 63M 8983 18-7732 -
B (1957-67) 4 Z-1 63M2 12206 18-7732 -
K (1956-62) 4 Z-1 63M2 12091 18-7732 -
153"(2.5L), 181"(3.0L) 4 R-2 2GC 7041187, 7042181, 17059055 18-7070 9-37616
225"(3.7L) 6 R-2 2GC 7025181, 189 18-7070 9-37616
283"(4.6L) 8 R-2 2GC 7019082 18-7070 9-37616
283"(4.6L) 8 R-4 4GC 7013071, 7015090 18-7019 -
283"(4.6L) 8 C-4 WCFB 2669, 3205 18-7025 -
283"(4.6L), 307"(5.0L), 327"(5.3L) 8 C-4 AFB 3660, 6310 18-7022 -
305"(5.0L), 350"(5.7L) 8 R-4 4MC 17056287, 17058280 18-7072 9-37620
305"(5.0L), 350"(5.7L), 454"(7.4L) 8 R-4 4MV 17059294, 17059295, 17059296 18-7095 9-37621
307"(5.0L), 327"(5.3L), 350"(5.7L) 8 C-4 AVS 4695, 6117 18-7023 -
307"(5.0L), 350"(5.7L) 8 C-2 BBD 6478 18-7027 -
307"(5.0L), 454"(7.4L) 8 R-4 4MV 7044283, 7044288, 7044289 18-7072 9-37620
Refine Parts List
Eng./Model:
Price: $38.22
Save: $14.94
(28% Off $53.16)
Part # 18-7019
2nd Day Air for $2 More Eligible
SHIPS TOMORROW!* if ordered in 23 hrs 30 mins.
Hurry! Only 1 left in stock
No Reviews
Price: $43.64
Save: $17.84
(29% Off $61.48)
Part # 18-7022
2nd Day Air for $2 More Eligible
SHIPS TOMORROW!* if ordered in 23 hrs 30 mins.
Hurry! Only 1 left in stock
No Reviews
Price: $43.97
Save: $14.61
(24% Off $58.58)
Part # 18-7023
2nd Day Air for $2 More Eligible
No Reviews
Price: $52.51
Save: $4.46
(7% Off $56.97)
Part # 18-7025
2nd Day Air for $2 More Eligible
No Reviews
Price: $20.08
Save: $9.25
(31% Off $29.33)
Part # 18-7070
2nd Day Air for $2 More Eligible
SHIPS TOMORROW!* if ordered in 23 hrs 30 mins.
Price: $21.20
Save: $10.03
(32% Off $31.23)
Part # 18-7072
2nd Day Air for $2 More Eligible
SHIPS TOMORROW!* if ordered in 23 hrs 30 mins.
No Reviews
Price: $20.04
Save: $8.95
(30% Off $28.99)
Part # 18-7095
2nd Day Air for $2 More Eligible
SHIPS TOMORROW!* if ordered in 23 hrs 30 mins.
Price: $53.64
Save: $3.87
(6% Off $57.51)
Part # 18-7732
2nd Day Air for $2 More Eligible
SHIPS TOMORROW!* if ordered in 23 hrs 30 mins.
No Reviews
Sierra
Chris Craft carburetor repair kits
Average Customer Review for Carburetor Kit - 18-7070 - Sierra
Full StarFull StarFull StarFull StarEmpty Star
Based On 6 Reviews | Write Review
Full StarFull StarFull StarFull StarFull Star
Worked Great
by Warren from Alexandria, Virginia on June 24, 2015
Product worked perfect for my 1988 Bayliner 3.0l omc
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Exactly what I needed
by Tim from Antario, California on April 29, 2013
I was having difficulty finding what I needed because this was an older model however, you guys helped me get exactly what I needed and at a great price. Also, I received it way before I thought I would. Thanks!
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
carb kit
by Gerald from Thunder Bay, Ontario on June 17, 2012
everything fit perfect
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Worked Great!
by Dave from Greenwood, Indiana on April 23, 2012
This product worked great, I had no problems with the parts.
(2 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Buyer
by Kenneth from Loveland, Ohio on July 19, 2011
Totally satisfied
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarEmpty StarEmpty StarEmpty StarEmpty Star
Review for Sierra 18-7070 Carb Kit
by a Customer on June 22, 2009
The seat for the needle valve in this kit was oblong and completely useless. After installing the kit i noticed the motor ran rich at idle and would be flooded after sitting for a few min with the motor turned off...this was not a problem i had before the kit...i thought the float was set incorrectly but it was not...i checked for correct gaskets but upon taking the seat out to make sure i put a gasket in i found that that hole in the seat was oblong and letting gas in...replaced with old seat and problem went away...boat runs good now....i think the company should have checked the kit before sending it out....thanks.
(21 of 25 people found this review helpful)
Was this review helpful?
Average Customer Review for Carburetor Kit - 18-7095 - Sierra
Full StarFull StarFull StarFull StarHalf Star
Based On 3 Reviews | Write Review
Full StarFull StarFull StarFull StarFull Star
Carb Rebuilt Kit
by Wayne from Greenbrier, Arkansas on August 08, 2012
Everything was there to rebuild my Rochester Quadrajet.
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Good Kit for the price
by Norman from Rocky Hill, Connecticut on July 24, 2012
I shopped around and this was the best deal. It is a good carb kit.
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
Carb kit
by Beverly from Omaha, Nebraska on June 06, 2011
I had to buy the whole carb kit just for the accelerator pump, but I guess that's OK considering the engines are "89s. and they don't make individual parts any more. Anyway, it's all back together and runs great. Now if the Missouri River hadn't flooded out our marina, I might be enjoying boating again. B.C.
Was this review helpful?
Q:
1993 3.0 mercruiser carb. Number 1539GA-4 what kit do I need?
A:
We do not pull up that carb number. Check if there are any other numbers on the carb. Should be a number like 806078A2 or something along those lines.


Q:
Does this kit fit Rochester quadrajet #17080561 ?
A:
We would need make, model, etc. to cross reference OEM number. If you need some assistance call us at 1-800-914-1123. We should have a kit, but can only confirm through that route.


Q:
Does this fit carb # 807312?
A:
No it does not fit that carb model.


Q:
My boat is a 1996 mercuriser 5.7 with a two bbl what kit doses it take07312 5902?
A:
We would need to know serial number and carb model you have. Whether it be Mercarb, Weber, etc. Call us at the number at the top of the page and we can assist you further.


Q:
Hi. My caburetor, shoo the number 1389-9562 it on 3.0l mercrusier, is good is kit. Thanks?
A:
You should need 18-7097, this one will not work.


Ask a question
Question & Answer Guidelines
This product ships in 1 to 3 business days.
Add to Cart and enter your Postal Code to determine the shipping charges and estimated delivery date.
Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies