Clear Sealer (Pettit)

Clear Boat Sealer, Quart - Pettit (Kop Coat) - Pettit Paint
Your Price: $23.29
Save: $18.20
(43% Off $41.49)
Part # 2018Q ValueShip™ Eligible
SHIPS TODAY!* if ordered in 4 hrs 20 mins.
No Reviews | Write Review
Pettit Paint
Features:
  • Excellent penetration into raw wood for inproved stability and moisture resistance.
  • Prevents excessive absorption of vehicle from undercoaters or varnishes.
  • Applies easily by brush or spray.

GENERAL DESCRIPTION
This is a phenolic resin-based sealer used for priming all types of raw wood prior to painting. The sealer acts as a moisture barrier layer to prevent peeling and excessive absorption of vehicle from undercoaters or varnishes by the new wood. It should be lightly sanded to a smooth surface before undercoating or varnishing. 2018 Clear Sealer can be used under all Pettit one-part undercoaters, varnishes and topside finishes. Do not use Clear Sealer on teak or other oily woods before varnishing or painting (use 2012 Super Dry Sealer).

A phenolic resin based sealer used for priming all types of raw wood. Acts as a moisture barrier to prevent peeling or rot. Approximate gallon coverage: 600 sq. feet. Dry to recoat time - 4 hours.

APPLICATION INFORMATION
Stir 2018 Clear Sealer before application. 2018 Clear Sealer may be applied by brush, conventional or airless spray. Thinning is not normally required although on very warm days use Pettit 120 Brushing Thinner at 5-10% by volume to ease brushing and maintain good flow. When spraying, use Pettit 121 Spraying Thinner up to 20% by volume. Spray an even, wet coat to minimize orange peel. Do not apply 2018 Clear Sealer on extremely humid days or when rain is threatening. Do not apply in the late afternoon when working outdoors as the wet film may be adversely affected by dew. On fir or any wood that has a large hard grain pattern wipe with dry rags while the sealer is wet to remove the excess from the hard grain areas. 2018 Clear Sealer is not completely absorbed into the hard grain.

SURFACE PREPARATION
Wood must be clean, dry and properly prepared prior to varnishing or painting. When sanding wood, always sand with the grain. Use a vacuum, air hose, or tack rag to remove all traces of sanding residue. Follow all surface preparation steps carefully, avoiding shortcuts. Inadequate surface preparation will virtually assure inadequate performance.

Disclaimer: Charts apply to Interlux products only. The information provided is not intended to be exhaustive. Because iboats.com does not know how this information is being used, they cannot take responsibility for any actions as a result.

The performance of marine paint on many factors outside the control of iboats.com, including surface preparation, proper application, and environmental conditions. Therefore, iboats.com cannot guarantee this product's suitability for your particular purpose or application.

By purchase or use of this product, buyer agrees that the sole and exclusive remedy, if any, is limited to the refund of the purchase price or replacement of the product at iboats.com's option.

Ask a question for
This product ships in 1 business day.

Add to Cart and enter your Postal Code to determine the shipping charges and estimated delivery date.
* Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies
September Savings! Enjoy deep discounts on thousands of clearance and winterizing items.