SeaStar Solutions
Control, Single, Side Mount, W/Tilt &Trim - SeaStar Solutions
Price: $475.75
Save: $103.84
(17% Off $579.59)
Part # CH1752P
SHIPS TOMORROW!* if ordered in 16 hrs 48 mins.
This item is found in the following Product Families
The ergonomics and features of our CH1700 controls are advanced beyond those of any other control on the market. A shapely, balanced handle design provides an incredibly smooth yet positive feel, neutral interlock, throttle warm-up and start-in-gear protection features are standard on all CH1700 models, with trim/tilt, emergency cut off switches offered as an option. In addition, the cosmetics of these controls can be configured to suit many tastes. Includes chrome and black inserts. For starboard gunwale mount control. CH1700 controls are suitable for use with both universal type (3300) or OEM type control cables without the need for adaption.
Full StarFull StarFull StarFull StarHalf Star
Based On 2 Reviews | Write Review
Full StarFull StarFull StarFull StarFull Star
Very Satisfied
by Melinda from Lindale, Texas on June 30, 2013
Very satisfied. Will recommend this product.
(1 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
Shifting into high gear
by Philip from FT Huachuca, Arizona on October 10, 2011
It arrived fast and it was easy to insatall and it seems to work but I have yet to test it on the water.
(6 of 10 people found this review helpful)
Was this review helpful?
I have a 1988 wellcraft classic with 350 mercruiser will this control work with my engine?
Yes this is universal in its design. It will accept OEM cables.

I have a 1990 invader, will this control box work on my boat?
This is universal in its design, but it does accept OEM control cables and 33C cables. So you should be able to make it work to your application.

Stupid question from a new boat owner. My current control has no tilt but does have a trim switch. It will allow me to trim the outdrive all the way up for towing. I assume the CH1751P will work the same way?
If you have only trim switch then you need the CH1751P. This is a trim switch only. Tilt and trim is for when two separate switches are needed for sterndrive engines.

1992 Bayliner Capri will this control work in my application?
Yes it will work as it works with both universal control cables and OEM type cables.

I have 1987 Regal Sebring with the 205/V6. I have a trim button along with a seperate trailer button. Will this work with existing cables and work for my application?
Yes this most definitely can be used to replace your control with a trim and separate trailer button. This control has two buttons, one for Trim the other for Tilt. The tilt button is what is used for the trailer button. The SeaStar installation manual makes this very clear on page 3. TRAILER (TILT) SWITCH. "Used to raise the engine for trailering the boat. This switch normally is used on I/O applications". Page 9 explains how to wire the switch for Trailer(Tilt) function. The manual can be viewed and downloaded from the SeaStar website.
This does not have a switch for the trailer, you would have to have some kind of pigtail wiring to match both. However, this is universal in its design and works on any boat. It works with both universal cables and OEM style cables.

Ask a question
Question & Answer Guidelines
This product ships in 1 business day.
Add to Cart and enter your Postal Code to determine the shipping charges.
Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies