Copper Bronze Hard Racing 1959, Quart - Pettit Paint
- For dry sailed boats or boats stored in non-fouling fresh water.
- Can be buffed to give a high gloss, ultra smooth surface.
- Suitable for use on fiberglass, wood and steel hulls
- Excellent for trailered boats.
Non-antifouling racing finish. Tough, smooth synthetic alkyd enamel. For use when boat is dry-sailed or stored in fresh water. Buff for high gloss, ultra-smooth surface.
1959 Hard Racing Copper Bronze is recommended for use in fresh water on racing hulls, sailboats, runabouts or cruisers. It is a non-antifouling hard racing finish that can be buffed to give a high-gloss, ultra-smooth surface.
1959 Hard Racing Copper Bronze is recommended for use in fresh water on racing hulls, sailboats, runabouts or cruisers. It is a non-antifouling hard racing finish that can be buffed to give a high-gloss, ultra smooth surface. It can be used in saltwater for small, dry sailed boats which are not left in the water. When used above the waterline in saltwater, the 1959 Hard Racing Copper Bronze will oxidize to a green color if not overcoated with a clear sealing coat. 1959 Hard Racing Copper Bronze may be applied over most aged hard racing non-antifouling coatings. If the old paint type is unknown, sand a small area and apply a test patch of 1959 Hard Racing Copper Bronze to test its compatibility with the old paint. If the 1959 cracks or lifts the old paint, all the old paint will have to be removed. If nothing appears to happen when the 1959 is applied, let the test patch dry overnight, then scrape the 1959 to see if it is adhering to the old paint satisfactorily. If the adhesion looks good follow the recommendation for Previously Painted Surfaces.
1959 Hard Racing Copper Bronze is loaded with copper flake pigment. As a result of this there is a tendency for settling to occur, especially if the paint has been on the shelf for several months. It is necessary to thoroughly mix the paint before using. If possible shake the can of paint on a mechanical paint shaker. Before using check the sides and bottom of the can to make sure all the pigment has been mixed in. If mixing is going to be done with a wooden paddle or an electric drill mixer, pour off half of the liquid from the top of the can into another can and then properly mix in any settled pigment; then remix the two parts together thoroughly.
Adhere to all application instructions, precautions, conditions and limitations to obtain optimum performance. Refer to individual labels and tech sheets for detailed instructions when using associated products, etc. Do not thin 1959 Hard Racing Copper Bronze more than 5% (6.4 ounces per gallon) or inadequate paint film thickness will occur and premature erosion of the finish will be likely.
Coating performance, in general, is proportional to the degree of surface preparation. Follow recommendations carefully, avoiding shortcuts. Inadequate preparation of surfaces will virtually assure inadequate coating performance.
Disclaimer: Charts apply to Interlux products only. The information provided is not intended to be exhaustive. Because iboats.com does not know how this information is being used, they cannot take responsibility for any actions as a result.
The performance of marine paint depends on many factors outside the control of iboats.com, including surface preparation, proper application, and environmental conditions. Therefore, iboats.com cannot guarantee this product's suitability for your particular purpose or application.
By purchase or use of this product, buyer agrees that the sole and exclusive remedy, if any, is limited to the refund of the purchase price or replacement of the product at iboats.com's option.