Cover Reinforcement Kit - ENDURACover

Cover Reinforcement Kit - ENDURACover
Your Price: $19.99
Save: $21.86
(52% Off $41.85)
Part # 61050 ValueShip™ Eligible
ENDURACover

Product Families

Cover Reinforcement Kit
    Boat Cover Reinforcement/Repair Kit This reinforcement kit is an ideal way to prolong the life of your boat cover. Kit Includes: One yard of self …

    Boat Cover Reinforcement/Repair Kit

    This reinforcement kit is an ideal way to prolong the life of your boat cover.

    Kit Includes:

    • One yard of self adhesive material

    Use it to add extra padding to stress points from windshields, trolling motors, etc. or to patch wear areas and tears that may develop over time. Simply cut to desired size and apply to clean surface.

    Average Customer Review for Cover Reinforcement Kit - ENDURACover
    Based On 17 Reviews | Write Review
    Great Cover for the Price
    by E-J from Mattawan, Michigan on June 27, 2014
    This cover was used for my Boston Whaler Center Console and after I received it and put it on my boat was pleasantly surprised about the fit. The cover is well made and fit like a true custom cover with minor slack areas (which could be pulled taught when using the supplied tie-down straps). This cover is worth more than its cost and I highly recommend it. The seamed draw rope and engine cover makes this a great "mooring" cover and with the tie down straps the cover stays on great at highway speeds. Again I recommend this "custom" cover to anybody and have gotten many comments about which "local" canvas shop made it and the questioners couldn't believe it when I said bought on the internet from a non OEM supplier. Great cover for the expense.
    Was this review helpful?
    pontoon cover
    by Raymond from Snellville, Georgia on June 22, 2014
    Product fit perfect,very pleased!
    Was this review helpful?
    Cover patch kit
    by Raymond from Park Ridge, Illinois on June 11, 2014
    This product is working very well at this point. About 1 month.
    Was this review helpful?
    love it
    by Robert from Evans, Georgia on May 30, 2014
    Great!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    Was this review helpful?
    carver boat cover
    by sam from Lake City, South Carolina on May 23, 2014
    This cover was to cover my Triton 170 DS SC, but does not fit very well. My motor is a 90 Mercury optimax and it stretches very tight and leaves gaps between the boat and the cover on the back and sides. The quality of the material is very good, but I think this cover is made to fit another boat not as wide as mine. The agent checked and the number with the company that it was ordered from (Carver) was correct to the boat I own. I'm just going to live with it. I have recently ordered a Bimini top from IBoats, so I didn't blame iboats for this, they were very helpful.
    Was this review helpful?
    reinforsement kit
    by Randy from Bethlehem, Connecticut on March 29, 2014
    material could be thicker
    Was this review helpful?
    boat top
    by Dan from Eagle, Colorado on June 26, 2013
    Made very well fits like a glove
    Was this review helpful?
    cover reinforcement kit
    by Jim from Redondo Beach, California on May 28, 2013
    Very easy to use, just cut,peel and place wherever you have extreme contact with items or bad corners of your cover where it might wear through. Nice way to more customize your cover and make it last longer.
    Was this review helpful?
    cover reinforcement kit
    by Fredrick from Owosso, Michigan on November 08, 2012
    this product does not stick as well as it should. It wants to peel off easily. I think that the adhesive should be improved.
    (1 of 1 people found this review helpful)
    Was this review helpful?
    Reinforcemnet kit no good
    by Thomas from Derby, New York on September 27, 2011
    No good, waste of money. Did not stick to brand new cover just out of the box. Difficult to place on cover without wrinckles, especially around corners. When I pulled the cover off the first time all the Reinforcements came off some stuick to the boat making a mess. Looks poor. I then made "reinforcement" by using foam pipe insulation over the lip of my windshield. I used the foam around my trolling motor blade and keel, it has to be tied in place simple to do. I used the foam at the rear corners of the boat just slip it in place before securing the cover. One 8 foot piece of foam insulation will handle all you have on a boat if you need two pieces it won't break the bank at a couple bucks. The foam insulation is very durable does not make a mess like glue from the reinforcement kit.
    (10 of 11 people found this review helpful)
    Was this review helpful?
    adhesive needs to be better
    by Stanley from Ann Arbor, Michigan on July 18, 2011
    The product concept, material and ease of use is great. The adhesive never really stuck to the cover and the re-enforcment just rolled off. I ended up using gorilla tape to hold it in place. Works-but looks tacky.
    (3 of 3 people found this review helpful)
    Was this review helpful?
    highly recommend them
    by Michael from Rockford, Illinois on July 15, 2011
    they are a most if you want your cover to last. there are a lot of points on your cover that take a beating. so reinforcements are a must.
    (0 of 2 people found this review helpful)
    Was this review helpful?
    Cover Reinforcement Kit - ENDURACover
    by Michael from Gahanna, Ohio on July 06, 2011
    The kit was as described. The glue backing is very sticky so be careful is does not touch itself or you will never get it off and onto the canvas. We will have to see how it holds up in the sun and heat to make a final judgement but so far so good....
    (0 of 1 people found this review helpful)
    Was this review helpful?
    Review for Cover Reinforcement Kit - ENDURACover by Carver
    by a Customer on July 10, 2009
    I hope that this is as good as the boat cover. I have not had the chance to install it yet.
    (0 of 19 people found this review helpful)
    Was this review helpful?
    Review for Cover Reinforcement Kit - ENDURACover by Carver
    by a Customer on June 17, 2009
    I have never recived such good service from anybody like you folks. I would like to thank Brad for such good service. If i need anything else i will order from I-boats. But i do have one thing, will this cover i bought really stand up to the Utah winters? its stored outside. Thanks a million Brad
    (0 of 8 people found this review helpful)
    Was this review helpful?
    Review for Cover Reinforcement Kit - ENDURACover by Carver
    by a Customer on June 11, 2009
    (0 of 8 people found this review helpful)
    Was this review helpful?
    Review for Cover Reinforcement Kit - ENDURACover by Carver
    by a Customer on May 05, 2009
    Definately a must if trailering with a cover
    (1 of 7 people found this review helpful)
    Was this review helpful?
    Ask a question for
    This product ships in 3 business days.

    Add to Cart and enter your Postal Code to determine the shipping charges and estimated delivery date.
    * Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
    Standard Shipping Policies

    Please be careful when ordering this product, it has limitations that differ from our General 30-day Return Policy. After all, we want you to be satisfied with your order so you'll return again and again as an iboats.com customer, and to also recommend us to your boating friends

    Semi-Custom Boat Covers

    Semi-custom covers are "made-to-order" and are thus specific to your order. However, we understand that sometimes a product you purchase just doesn't work out, which is why we want to make the return process as easy as possible for you. After all, we want you to be satisfied with your order so you'll return again and again as an iboats.com customer, and to also recommend us to your boating friends.

    A made-to-order semi-custom cover may be returned within the first 30 days after shipment, but is subject to a 15-25% restocking fee. Odd-Lots, Liquidations, In-Stock Specials, Closeouts and customer requested alterations are non-returnable unless an error was made by iboats.com or by the boat cover manufacturer.

    Merchandise must be in new, unused condition with all original packaging in good condition; plus parts, accessories, manuals, and/or warranty cards included. You will need to receive a return authorization number (RA #) as well as instructions from our Customer Service Department.

    Please note that each boat cover manufacturer may have additional requirements concerning product returns or warranty claims, including but not limited to: restocking fees, shipping fees, or product order change fees.

    Because boat covers are "made-to-order", there will be a $25-$50 fee for any boat cover order cancellation after 1 business day of purchase, as the cover has already gone into production.

    Warranty Policy

    30 days after the purchase date, the manufacturer of the product(s) will need to be contacted for a warranty claim.

    Returns for Canadian Customers

    Canadian customers, please be careful when placing your order; iboats.com does not accept any return merchandise on Canadian orders unless the merchandise you received was defective, damaged, or an error was made by iboats.com. In such cases, please contact iboats.com Customer Service within 30 days of the original shipping date for a return authorization number. Returned items that do not have a RA # will not be accepted.

    See our complete return policy.
    September Savings! Enjoy deep discounts on thousands of clearance and winterizing items.