Disc Brakes For 3000 Lb. Axle Assembly

Designed for use with Spring axle or Torsion style axles - Reverse lock out switch available and highly recommended, model #11245 - Comes with mounting brackets for Spring axle - For 13", 14" and 15" wheels - Rotor: diameter 9.2", 1/4" thick, 304 stainless steel - Hub: 1750 lb. capacity, bearing size 1-1/16" & 1-3/8", finish is hot dip galvanized, bolt pattern 5 on 4.5" - Caliper: Material 360 aluminum, pistons 360 alloy free brass - Brake Pads: Type GG friction material - Hardware: Stainless steel - Mounting Bracket: Hot dip galvanized.

	Disc Brake Line Kit for 3000lb Axle Assembly - Tie Down Engineering Part # 81099 Rated at 3000 psi and ideal for disc brake installation requirements. Connects from brake caliper to femail end of brake line or can be connected to existing steel lines with adapters included in the kit. Each brake line is 24" long.
	Brake Pad Kit for G4 Disc Brakes - Tie Down Engineering Part # 81100 Replacement pads for 10" and 12" disc brakes. Full axle replacement, 4 pads.
	Disc Brake Reverse Lock Out Solenoid for 3000lb Axle Assembly - Tie Down Engineering Part # 81103 Unlike drum brakes, disc brakes generate full braking power in reverse. If your actuator does not have a reverse lock out lever or switch, a reverse lockout solenoid should be installed at the actuator before installation of disc brakes. Can be used on drum brakes as well.
	Organic Brake Pad Kit for Vented Disc Brakes - Tie Down Engineering Part # 82084 Replacement pads for 10" and 12" disc brakes. Full axle replacement, 4 pads.