Prices are melting for cool savings.
Save Now during our BIGGEST Sale of the Year!

Dock Bumper Hardware

24 Items
 
B. Outside Corner (Male) (Tiedown Engineering)
Tie Down Engineering Products for Anchoring and Docks Danforth Anchors 3lbs-35lbs Tie Down Hardware Pipe Holder Plate Washer Outside Corner Inside …
List price: $44.49
Starting at:
$31.63
In stock
F. Angle (Tiedown Engineering)
Commercial grade. Should be used for all cross supports. Each leg 2-1/2"L x 5"H. For more dock hardware information including building guides, go …
List price: $4.99
Starting at:
$3.84
In stock
Carriage Bolt Set (Tiedown Engineering)
Used to attach component parts. 3/8 x 2-1/2" bolt, flat washer and nut. Hot dipped galvanized. Commercial grade 1/2" x 3". For more dock hardware …
List price: $10.29
Starting at:
$7.59
In stock
Deck Plate (Tiedown Engineering)
Heavy duty deck plate for use with Piling Hoop. This 3/16a3/4' thick 4a3/4'x 6a3/4' x 22" plate can be bolted from the top and side of the dock. The …
List price: $99.69
Your price:
$74.48
In stock
P. Connector Pin Set (Tiedown Engineering)
Standard grade. Used for quick disconnect of male and female connectors. Galvanized 3/4" connector pin and hitch clip pin. For more dock hardware …
List price: $12.19
Your price:
$8.93
In stock
H. Male T Connector (Tiedown Engineering)
Commercial grade w/ 1/2" tab. Use with Female T connector to attach fingers and ramps. Bolt set required for joint. Size: 5"L x 5"H For more dock …
List price: $21.99
Starting at:
$16.98
In stock
T. Roller Assembly (Tiedown Engineering)
Commercial heavy duty roller assembly. Bracket and roller bolt directly to the deck plate (26416). An aid to the up and down motion of the dock in …
List price: $90.69
Your price:
$67.20
In stock
Lag Bolt Set (Tiedown Engineering)
Standard grade bolt and flat washer hot dip galvanized used to attach flotation drums to dock system. Size: 3/8" x 2" For more dock hardware …
List price: $9.49
Starting at:
$6.40
In stock
I. Washer Plate (Tiedown Engineering)
Standard grade. Should be used with every Angle. Two required for each Angle. 1-1/2"L x 5"H. For more dock hardware information including building …
List price: $2.99
Starting at:
$2.31
In stock
14" Hoop Roller Pile Holder (Tiedown Engineering)
14" Commercial grade steel. The piling hoop secures around the piling, while roller permits smooth up and down movement. For more dock hardware …
List price: $244.79
Your price:
$155.83
In stock
K. Pipe Holder/Outside 3" (Tiedown Engineering)
Standard grade. Bolts to outside of dock. Uses 2" pipe to hold dock in place. Carriage bolt set required for attaching. For more dock hardware …
List price: $45.59
Starting at:
$32.58
In stock
Inside Rolling Ramp Bracket (Tiedown Engineering)
5" x 11" x 1/4" galvanized steel bracket Includes left and right ramp brackets For more dock hardware information including building guides, go …
List price: $157.99
Your price:
$109.55
In stock
D. Inside Corner (Tiedown Engineering)
Commercial grade. Should be used with one of the outside corners. Each leg has elongated holes for easy fit. 8-1/4"L x 5"H w/ 2-1/4" holes. For more …
List price: $25.39
Starting at:
$19.67
In stock
Boat Shield™ (Dock Edge)
This extruded U.V. stabilized polyethylene foam bumper with UV inhibitors is contoured at the back so it can be mounted both horizontally on your …
List price: $34.29
Your price:
$28.38
In stock
Q. Back Up Plate (Tiedown Engineering)
Reinforcing plates are used to back up single T males and females. 5" x 5". For more dock hardware information including building guides, go to …
List price: $8.79
Your price:
$6.57
In stock
E. Inside Corner / Pipe Holder (Tiedown Engineering)
Commercial grade. Should be used with one of the outside corners and has an internal pipe holder. 8-1/4"L x 5"H. Requires carriage bolt set for …
List price: $76.79
Starting at:
$57.69
In stock
S. Piling Hoop & Roller (Tiedown Engineering)
Piling hoop & roller intended for areas with a lot of wind, current or tidal action. Combines the Piling hoop (26412) and roller assembly (26414) …
List price: $286.59
Your price:
$199.28
In stock
C. Outside Corner End (Tiedown Engineering)
Commercial grade. Use this corner at ends of fingers and docks. Ideal for swim floats and ski jump corners. Each leg is 10"L x 5"H. For more dock …
List price: $22.89
Starting at:
$17.73
In stock
G. Female T Connector (Tiedown Engineering)
Commercial grade w/ 1/2" tabs. Two welded 1/2" tabs. Bolts to side of dock to attach fingers and ramps. 5"L x 5"H. For more dock hardware information …
List price: $28.99
Starting at:
$22.49
In stock
J. Chain Retainer (Tiedown Engineering)
Bolts to side of dock. Use weights and chain to hold dock in place. Accommodates 1/4", 3/8" and 1/2" chain. 5"L x 5"H. For more dock hardware …
List price: $43.39
Starting at:
$27.52
In stock
R. Piling Hoop (Tiedown Engineering)
Commerical grade. Heavy duty piling hoop for pilings up to 12" in diameter. The hoop is constructed of 1-1/2" pipe and is hot dip galvanized. It can …
List price: $128.79
Your price:
$89.71
In stock
Pile Chain Holder (Tiedown Engineering)
For use as a pile holder with 3/8" galvanized chain and shackles. Can be adjusted for various pile diameters. Size: 20-1/4" x 4-1/4" x 4-1/4" x 1/4" …
List price: $135.19
Your price:
$88.21
In stock
A. Outside Corner (Female) (Tiedown Engineering)
Commercial grade. Two 1/2" welded tabs. Use with a male outside corner. Each leg is 10"L x 5"H. For more dock hardware information including building …
List price: $46.09
Starting at:
$34.16
In stock
Securely mount side legs to the inside or outside of the dock frame without deforming wood causing bolt loosening and dock shifting. Kit includes 2 …
List price: $53.38
Your price:
$38.13
In stock
24 Items
 
Save More Now during the Summer Price Meltdown Sale!