Dock Edge
Premium Dockside Mooring Whip, 8', 2,500 Lbs - Dock Edge
Price: $274.06
Save: $74.83
(21% Off $348.89)
Part # 3200F
2nd Day Air for $4.99 More Eligible
Premium Dockside Mooring Whip, 12', 5,000 Lbs, 2 Piece - Dock Edge
Price: $411.12
Save: $112.57
(21% Off $523.69)
Part # 3400F
Premium Dockside Mooring Whip, 14', 10,000 Lbs - Dock Edge
Price: $475.77
Save: $129.82
(21% Off $605.59)
Part # 3600F
Premium Dockside Mooring Whip, 16', 20,000 Lbs - Dock Edge
Price: $424.99
Save: $269.80
(38% Off $694.79)
Part # 3800F
No Reviews
Ideal for protecting boats up to 33" in non tidal areas from damage caused by wind and wake.
  • These fiberglass whips act as a spring to maintain your boat at a safe convenient distance from your dock
  • Manufactured from solid fiberglass rod and wrapped in three additional multistage, cross wound fiber layers
  • Impervious to UV degradation, cold or heat
  • Unique line tensioner for easy, one handed operation
  • Please note that some areas are too rough for any type of mooring or tie up system
  • One complete set of Two Premium Mooring Whips
  • Mounting hardware and spring lines included
    * The exclusive "Plug & Socket" Design on these whips was developed by for quick and easy separation, allowing for convenient storage.

    DockEdge Mooring Whip

    DockEdge Mooring Whip Video

    Acts like a spring to maintain your boat at a safe distance from your dock. Ideal for protecting boats up to 33" in non tidal areas from damage caused by wind and wake. ... read more



    Video Transcript

    Dockedge mooring whips protect your boat from damage by securely holding it away from the dock’s edge. Rough waters from passing boat traffic or natural causes harmlessly rock the boat instead of slamming it against the dock.

    Installation is easy. Line up the whip bases with the 4 1/2 cleats on your boat. Drill pilot holes and secure the base with lag screws. Assemble the two sections of each whip making sure to twist the top portion so that it securely seats in the bottom section. Thread the lines through the top pulley and insert the whip into the base. Tighten the T-knob to hold the whip in place. Measure 18 inches from the base and install the cleat. Secure the free end of the mooring line around the whip cleat and fasten the looped end to the boat cleat as shown.

    Now a simple pull of the free end of the mooring line will position your boat safely out of harm’s way. Make sure the mooring lines aren’t too tight or that the whips aren’t under too much tension. Properly adjusted whips hold the boat safely away from the dock.

    read less
  • Full StarFull StarFull StarEmpty StarEmpty Star
    Based On 1 Review | Write Review
    Full StarFull StarFull StarEmpty StarEmpty Star
    Satisfied - 8 years of service
    by David from Wolfeboro Falls, New Hampshire on August 02, 2016
    These were replacements of Dock Edge whips that have been in service for about 8 years. They gave out and caused shards of fiberglass in my hands. Received the new ones from you very quickly - excellent service! Thanks. Wish it were practical to replace just the one that failed but it was almost as expensive as buying the pair so I opted for that.
    (6 of 6 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    Based On 1 Review | Write Review
    Full StarFull StarFull StarFull StarFull Star
    Very good quality
    by Gayle from West Islip, New York on August 28, 2016
    Very good quality, performs very well. I have a heavy 24' walk around Mako. Keeps the boat off the dock.
    Was this review helpful?
    Q:
    Does 2 piece mean 2 complete whips? 2 tops 2 bottoms which would be 2 whips?
    A:
    This set comes with 2 full mooring whips. 2 bottom pieces and 2 top pieces as well as all the mounting hardware necessary.


    Q:
    What length are they coming when delivered can I get them on a plane?
    A:
    They are roughly about 8 and half feet long in the package.


    Ask a question
    Question & Answer Guidelines
    This product ships in 1 business day.
    Add to Cart and enter your Postal Code to determine the shipping charges.
    Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
    Standard Shipping Policies