Hazardous materials:
Some of these items have hazmat restrictions. Extra shipping charges may apply.
Pettit Paint
EZ-Fair 7050, 6.45 oz. Cartridge - Pettit Paint
Price: $27.99
Part # 7050CRT
2nd Day Air for $2.99 More Eligible
No Reviews
EZ-Fair 7050, Quart - Pettit Paint
Price: $57.02
Save: $9.67
(14% Off $66.69)
Part # 7050Q
EZ-Fair is a lightweight, two-part epoxy putty designed for filling and smoothing surface imperfections above and below the waterline. The special resins used in EZ-Fair impart a high degree of water and chemical resistance to the product, making it an integral part of the Pettit Gelcoat Blister Repair System. In addition, EZ-Fair is the product of choice for fairing metal keels or any underwater surface. Use it for leveling uneven surfaces, filling gouges, scratches, or other damage on fiberglass, wood or metal surfaces. It's excellent chemical and water resistance make it the ideal choice for repairing blistered gelcoat in an osmotic blister repair system. EZ-Fair is non-sagging and non-shrinking and sands to a smooth finish.

EZ Fair Cartridge Kit - Pettit Paint

Product Information
Product Type Fairing Compound
Key Attributes •For fairing, filling, and patching
•Fast-cure formula allows for quick recoats
•Can be easily painted
•Waterproof when cured
•Use above or below the waterline
•Excellent chemical resistance
Coverage To Achieve Minimum Dry Thickness Per Gallon
@ 3/4" thick (750 mils) .... 0.8 square feet
@ 1/2" thick (500 mils) .... 1.2 square feet
@ 1/4" thick (250 mils) .... 2.4 square feet
@ 1/8" thick (125 mils) .... 4.8 square feet
@ 1/16" thick (62.5 mils) .... 9.6 square feet
Technical Data
Technology & Formulation Epoxy
Substrates All properly primed surfaces (For more specific instructions per substrate, please refer to the product data sheet provided below.)
Thinner Do not thin
Surface Preparation See product data sheet below
Mixing of Product 2:1 by volume
Method Putty knife or spatula
Application Temperature 50°F - 90°F
Recommended Film Thickness Up to 3/4"
Recoating Information (Recoat/Relaunch) Sand Time:
By hand....3 hours @ 25°C (77°F)
DA or random-orbit....4 hours @ 25°C (77°F)

Associated Products From Pettit Paint:
  • D95 Fiberglass Dewaxer
  • Bio Blue 92
  • Pettit Protect 4700/4701
  • Pettit Protect 4100/4101
  • Pettit Antifouling Paints
  • Pettit Topside Paints
  • 97 Epoxy Thinner
EZ Fair Product Data Sheet PDF
MSDS for EZ Fair*
*Disclaimer:Information on this material is subject to change without notice. Please visit the corresponding manufacturer's website for updates.
Average Customer Review for EZ-Fair 7050, Quart - Pettit Paint
Full StarFull StarFull StarFull StarFull Star
Based On 1 Review | Write Review
Full StarFull StarFull StarFull StarFull Star
good quality product, fast shipment
by Igor from Sunnyvale, California on December 01, 2016
Arrived really fast. The product itself is pretty dense white putty, looks also to have very good sticking qualities. Tried it first on some home bathtub repairs, later used it to fair cast iron keel on my sailboat. Used it over Interprotect 2000E base layer on the keel. At some points it went over the hull and looks to be sticking there good too. Will see how well it will hold . The only small problem with it - both putty and catalyst are dense so it was difficult to measure the exact 2:1 mixing ratio
Was this review helpful?
This product ships in 1 business day.
Add to Cart and enter your Postal Code to determine the shipping charges.
Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies