Hazardous materials:
This item has hazmat restrictions. Extra shipping charges may apply.
Pettit Paint
EZ-Prime 6149, White, Gallon - Pettit Paint
Price: $68.82
Save: $56.77
(45% Off $125.59)
Part # 6149G
EZ-Prime 6149, White, Quart - Pettit Paint
Price: $25.13
Save: $19.96
(44% Off $45.09)
Part # 6149Q
It should be used as a base coat whenever the surface to be painted is aged, cracked, checked, pitted or in any way less than smooth. It can be applied to fiberglass, wood and previously painted surfaces.

EZ Prime White Surfacer/Undercoater - Pettit Paint

Product Information
Product Type Anti-Corrosive Aluminum Primer
Key Attributes •Easy to Mix and Apply
•Epoxy primer for aluminum
•Strontium chromate for maximum corrosion control
•Smooth finish provides an excellent bonding surface for additional primers or topcoats
Coverage 400 sq. ft/gal.
Technical Data
Technology & Formulation Oil Modified Alkyd
Substrates Fiberglass, Wood, Steel, Aluminum, Lead, Bronze (For more specific instructions per substrate, please refer to the product data sheet provided below.)
Thinner 120 Brushing Thinner
Surface Preparation See product data sheet below
Mixing of Product Mix Thoroughly. Can be thinned 5-10% with 120 Brushing Thinner to ease application.
Method Brush, Roller, or Spray
Application Temperature 50°F - 90°F
Number of Coats 1 or 2
Recoating Information (Recoat/Relaunch) DRY TIME (HOURS): To Touch / To recoat
90F: 1/2 / 2
70F: 1 / 4
50F: 4 / 16

Associated Products From Pettit Paint:
  • 120 Brushing Thinner
  • 121 Spray Thinner
  • Easypoxy Enamels
  • EZ-Poxy 2 Polyurethane
  • Zspar Enamels
EZ Prime White Surfacer/Undercoater Product Data Sheet PDF
MSDS for EZ Prime White Surfacer/Undercoater*
*Disclaimer:Information on this material is subject to change without notice. Please visit the corresponding manufacturer's website for updates.
Full StarFull StarFull StarFull StarEmpty Star
Based On 6 Reviews | Write Review
Full StarFull StarEmpty StarEmpty StarEmpty Star
EZPrime gallon
by William from Louisville, Kentucky on July 05, 2017
This paint arrives extremely separated and requires 30 minutes or more to mix. This seems to be issue of primer only. One of my gallon cans was extremely dented. This left no space in can in order to stir paint. What a mess. Do not make mistake I did and accept a dented can. You wont be able to properly mix the paint back up. The product however is top notch. Good adhesion, fast drying, and sands easily.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
by Denise from Chula Vista, California on September 20, 2016
After I received the primer I had to contact Pettit because it was one huge solid lump- I stirred for over an hour and made little progress. Turns out they told me it need to be brought to a shaker and have them shake for 15 minutes. They said all cans like this due to high amount of solids. So it's not an issue from buying at this site. After shaking it was perfect! Super thick like pancake batter. Self levels, I rolled it on with semi rough high quality roller and for areas I could roll I used a foam brush which worked a lot better than my pricey purdy brush believe it or not! Only places I got drips was where I slopped it on too thick, easy to fix if I caught it in time (within 10 min or less) my deck was badly crazed and after two coats you couldn't even tell anymore. I followed up with EZ Poxy two coats. For a 20 ft day sailer top deck I used 3/4 gallon primer for two coats. Pettit has a calculator you can use to figure out what you need. I followed all the directions on the Pettit website and am extremely please wth the results! Iboats had the absolute best price on this and it arrived in one day!
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarEmpty StarEmpty StarEmpty StarEmpty Star
big lump inside
by Karen from Lake Orion, Michigan on July 14, 2016
Very unhappy. The paint had congeled in the bottom. Lump at least 1/3 of the can. Had to pay to get it shook up.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
EZ-Prime 6149, White, Gallon - Pettit Paint
by Mark from Millbrook, Alabama on June 08, 2016
thank you great product!
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Best shipping ever and best product with best price
by James from Annandale, Virginia on January 06, 2016
This undercoat is the best I've ever used. It's heavy, fills great and drys in just the right amount of time to not delay proceeding with the work. I couldn't find a better price and was amazed at the shipping cost, next to nothing compared to others who want to charge high shipping and then a "hazardous material" shipping cost. Keep up the great work iboats!
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Petit epoxy undercoat
by Cathy from Flushing, Michigan on July 29, 2011
Received product quickly. Great company to deal with. Product is worth extra expense.
Was this review helpful?
Average Customer Review for EZ-Prime 6149, White, Quart - Pettit Paint
Full StarFull StarFull StarHalf StarEmpty Star
Based On 3 Reviews | Write Review
Full StarFull StarFull StarFull StarFull Star
Great adherence!
by Webb from Mauldin, South Carolina on June 26, 2017
Sprayed on flawlessly with great adhesion.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Great product
by Nicholas from Cape Coral, Florida on July 08, 2016
Easy to work with as long as you do all the prep work. I am very happy with the results of the Ez Poxy primer and topside paint. I did have to mix two different blues to match my seats. 2008 hull looks new. I have received many compliments on how nice it looks.
Was this review helpful?
Full StarEmpty StarEmpty StarEmpty StarEmpty Star
by Bob from severna park, Maryland on October 08, 2014
great service thanks RMT
(0 of 6 people found this review helpful)
Was this review helpful?
This product ships in 1 business day.
Add to Cart and enter your Postal Code to determine the shipping charges.
Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies