Prices are melting for cool savings.
Save Now during our BIGGEST Sale of the Year!

Faria Coral Instruments

Faria
Coral Instruments Trim Gauge, Mercury Marine, Sender Required - Faria
Your Price: $27.65
Save: $6.34
(18% Off $33.99)
Part # 13017 ValueShip™ Eligible
SHIPS TOMORROW!* if ordered in 18 hrs 23 mins.
Coral Instruments Trim Gauge, Johnson Evinrude, Sender Required - Faria
Your Price: $27.65
Save: $6.34
(18% Off $33.99)
Part # 13016 ValueShip™ Eligible
SHIPS TOMORROW!* if ordered in 18 hrs 23 mins.
Hurry! Only 1 left in stock
No Reviews | Write Review | Ask Question
Coral Instruments Temp Kit, Outboard, 60-220°F, Sender Included - Faria
Your Price: $36.08
Save: $7.91
(17% Off $43.99)
Part # 13009 ValueShip™ Eligible
SHIPS TOMORROW!* if ordered in 18 hrs 23 mins.
Coral Instruments Water Temp, 100-250°F, Sender Required - Faria
Your Price: $26.84
Save: $6.15
(18% Off $32.99)
Part # 13004 ValueShip™ Eligible
SHIPS TOMORROW!* if ordered in 18 hrs 23 mins.
Coral Instruments Oil Pressure, 80PSI, Sender Required - Faria
Your Price: $25.36
Save: $6.43
(20% Off $31.79)
Part # 13002 ValueShip™ Eligible
SHIPS TOMORROW!* if ordered in 18 hrs 23 mins.
Coral Instruments Fuel Level Gauge - Faria
Your Price: $27.65
Save: $6.34
(18% Off $33.99)
Part # 13001 ValueShip™ Eligible
SHIPS TOMORROW!* if ordered in 18 hrs 23 mins.
Coral Instruments Battery Indicator, Remaining Charge - Faria
Your Price: $36.85
Save: $8.14
(18% Off $44.99)
Part # 13012 ValueShip™ Eligible
SHIPS TOMORROW!* if ordered in 18 hrs 23 mins.
Coral Instruments Voltmeter, 10-16 Volt - Faria
Your Price: $25.36
Save: $6.43
(20% Off $31.79)
Part # 13010 ValueShip™ Eligible
SHIPS TOMORROW!* if ordered in 18 hrs 23 mins.
Coral Instruments Tachometer, 6000 RPM, 4" for Inboard Outboards - Faria
Your Price: $84.51
Save: $18.48
(17% Off $102.99)
Part # 33004 ValueShip™ Eligible
SHIPS TOMORROW!* if ordered in 18 hrs 23 mins.
Coral Instruments 33005 Tachometer, 7000 RPM, 4" for Outboards - Faria
Your Price: $78.80
Save: $19.89
(20% Off $98.69)
Part # 33005 ValueShip™ Eligible
SHIPS TOMORROW!* if ordered in 18 hrs 23 mins.
Coral Instruments Engine Synchronizer, 4" - Faria
Your Price: $135.35
Save: $29.64
(17% Off $164.99)
Part # 33007 ValueShip™ Eligible
SHIPS TOMORROW!* if ordered in 18 hrs 23 mins.
Hurry! Only 1 left in stock
Coral Instruments Speedometer, 55 MPH, 4" - Faria
Your Price: $43.38
Save: $9.61
(18% Off $52.99)
Part # 33009 ValueShip™ Eligible
SHIPS TOMORROW!* if ordered in 18 hrs 23 mins.
Coral Instruments Speedometer, 80 MPH, 4" - Faria
Your Price: $43.38 (Out of stock)
Save: $9.61
(18% Off $52.99)
Part # 33010 ValueShip™ Eligible

Give a stylish and functional update to your boat dashboard with Faria Coral Instruments. Their American/metric dial features a black background with white and blue graphics. The contoured pointer in white allows you to easily read the measurement.

  • Blue and white graphics, black background with white contoured pointer
  • Flat glass lens for clear visibility
  • Perimeter lighted dial

Edged with raised bezel in black brushed with silver, the instruments look uber classy. The dial is perimeter lit for comfortable reading during night and is covered with a flat glass that prevents entry of dust, water and other unwanted particles.

Features of Faria Coral Instruments:

  • Blue and white graphics
  • Black background
  • White contoured pointer
  • Flat glass lens for clear visibility
  • Perimeter lighted dial
  • Black aluminum bezel with burnished edge

Specifications:

Manf. Part # 13017

  • Type: Trim gauge
  • Size: 2"
  • Weight: 0.26 lbs
  • Fits Mercury/Mariner/Mercruiser/Volvo DP/Yamaha-2001 and newer models

Manf. Part # 13016

  • Type: Trim gauge
  • Size: 2"
  • Weight: .26 Lbs
  • Trim gauge, OMC outboard

Manf. Part # 13009

  • Type: Temperature kit
  • CYL head temp 60°-220°F with sender
  • Size: 2"
  • Weight: .28 lbs

Manf. Part # 13004

  • Type: Water temp gauge
  • Temperature range: 100°-250°F
  • Size: 2"
  • Weight: .26 lbs.

Manf. Part # 13002

  • Type: Oil Press Gauge
  • Maximum pressure: 80 PSI
  • Size: 2"
  • Weight: .26 lbs.

Manf. Part # 13001

  • Type: Fuel level gauge
  • E-1/2/F
  • Size: 2"
  • Weight: .26 lbs.

Manf. Part # 13012

  • Type: Remaining battery charge level indicator
  • Voltage: 12 volts DC
  • Size: 2"
  • Weight: .30 lbs

Manf. Part # 13010

  • Type: Voltmeter
  • Range: 10-16 volts DC
  • Size: 2"
  • Weight: .26 lbs

Manf. Part # 33004

  • Type: Tachometer
  • Compatibility: Tach 6000 gas inboard & I/O engines
  • Size: 4"
  • Weight: .68 lbs

Manf. Part # 33005

  • Type: Tachometer
  • Compatibility: Tach 7000 universal for all outboards
  • Size: 4" (required 3-3/8" hole cut)
  • Weight: .68 Lbs

Manf. Part # 33007

  • Type: Engine synchronizer
  • Compatibility: Dual engine
  • Size: 4"
  • Weight: .68 lbs

Manf. Part # 33009

  • Type: Speedometer
  • 55 MPH
  • Size: 4"
  • Weight: .54 lbs

Manf. Part # 33010

  • Type: Speedometer
  • 80 MPH
  • Size: 4"
  • Weight: .54 lbs

Learn More:

Product Catalog

Full StarFull StarFull StarFull StarFull StarFaria trim gauge
by Tim from Farmington, Minnesota on July 19, 2015
Came in the mail earlier than promised. Easy to install and looks good. I bought a whole set gauges to replace all of mine on an '85 Skeeter. I would recommend iboats to anyone who is looking for for any replacement gauges. Shopped around quite a few places and I'm tell you they have the best prices I've seen thus far plus they have a wide range of products. Check these guys out before going anywhere else.
Was this review helpful?
Full StarFull StarFull StarEmpty StarEmpty StarFaria Temp Kit
by Monika from Oswego, New York on June 10, 2013
If you absolutely, positively want and cannot obtain an OEM outboard engine temperature gauge for your engine, then this is the gauge for you. To install, you must remove a head bolt, pass bolt thru hole in temp sensor so sensor lays flat against head (so it can read HEAD metal temp, NOT cooling system water temp), then re-install and re-torque head bolt. I returned this product unused. I got lucky and found OEM Force outboard temperature gauge kit (includes sender which installs by removing brass plug in head and threading sender into hole, thereby reading cooling system water temp).
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star Based On 1 Review | Write Review
Full StarFull StarFull StarFull StarFull StarGreat Gauges
by Osvaldo from DeKalb, Illinois on June 09, 2013
This was easy to install and worked like a champ with my sending units. Great gauges.
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star Based On 1 Review | Write Review
Full StarFull StarFull StarFull StarFull StarGreat Gauges
by Osvaldo from DeKalb, Illinois on June 09, 2013
This was easy to install and worked like a champ with my sending units. Great gauges.
Was this review helpful?
Average Customer Review for Coral Instruments Fuel Level Gauge - Faria
Full StarFull StarFull StarFull StarFull Star Based On 3 Reviews | Write Review
Full StarFull StarFull StarFull StarFull StarFaria gas gauge
by Tim from Farmington, Minnesota on July 19, 2015
Came in the mail earlier than promised. Easy to install and looks good. I would recommend iboats to anyone who is looking for for any replacement gauges. They have the best prices I've seen thus far plus they have a wide range of products. Check these guys out before going anywhere else.
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarFuel level Gauge
by Holger from Discovery Bay, California on June 18, 2013
Product as advertised, easy to install, very satisfied.
(0 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarGreat Gauges
by Osvaldo from DeKalb, Illinois on June 09, 2013
This was easy to install and worked like a champ with my floats. Graet gauges.
(0 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarHalf Star Based On 2 Reviews | Write Review
Full StarFull StarFull StarFull StarFull StarBattery tester
by Salah from Winnipeg, Manitoba on August 18, 2014
High quality,very accurate. I strongly recommend it
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty StarVery Good Battery Indicator, but...
by Monika from Oswego, New York on June 10, 2013
The product works as intended, however the electrical system on my 1988 Force 50 hp outboard isn't equipped with a voltage regulator, so this gauge needed to be on a separate switch, to prevent gauge from pegging the needle when engine was running (charging). It's a great battery quick check gauge to check battery charge level. If you are installing on a boat and want to keep an eye on battery AND charging system health while engine is running, I would recommend installing a volt meter instead. Probably best use for this gauge is for use with deep cycle battery used for trolling motor, etc.
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star Based On 2 Reviews | Write Review
Full StarFull StarFull StarFull StarFull Starrick
by Ricky from Wartburg, Tennessee on August 19, 2014
great part
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarGreat Gauges
by Osvaldo from DeKalb, Illinois on June 09, 2013
This was easy to install and worked like a champ with my floats. Great gauges.
(2 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Starrick
by Ricky from Wartburg, Tennessee on August 19, 2014
great tach only thing had to buy a wring harness to get every thing to work looks nice along with my other gauges i installed
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarGreat Tach
by Osvaldo from DeKalb, Illinois on June 09, 2013
This was easy to install and worked like a champ with my MSD units. Great gauges.
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty StarVery Good Product
by Donald from Dover, Idaho on August 09, 2012
Good looking and functional product. My dash is 1-1/4" thick so I had to cut the clamping ring ears off to achieve a secure mount. I expected a problem, so I was not suprised. The terminals on the tach itself were designed for the spade type and since my old tach had the screw type which required new terminals to be installed on my existing wiring, again no problem. The actual hook-up was then very simple, easy and straight forward, the new tach is working perfectly.
(2 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarFaria Tach
by Robert from Saskatoon, Saskatchewan on January 17, 2012
The tach looks great, a perfect replacement for my boat!
(2 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarFaria tachometer
by Tim from Farmington, Minnesota on July 19, 2015
Came in the mail earlier than promised. Easy to install and looks good. I bought a whole set gauges to replace all of mine on an '85 Skeeter. I would recommend iboats to anyone who is looking for for any replacement gauges. Shopped around quite a few places and I'm tell you they have the best prices I've seen thus far plus they have a wide range of products. Check these guys out before going anywhere else.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Stargauges
by Robin from Davenport, Iowa on August 08, 2014
its nice having gauges you can see
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty StarGreat Tach, BUT...
by Monika from Oswego, New York on June 10, 2013
...does NOT read RPM's on older outboard engines with 20 pole stator (alternator), therefor of no use to me. Found OEM Force Tachometer NIB instead. Returned Faria Tachometer unused.
(2 of 2 people found this review helpful)
Was this review helpful?
Full StarEmpty StarEmpty StarEmpty StarEmpty Star Based On 1 Review | Write Review
Full StarEmpty StarEmpty StarEmpty StarEmpty Stargood
by Son from South San Francisco, California on September 12, 2012
goodgoodgoodgoodgoodgoodgoodgoodgoodgood
(1 of 9 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star Based On 4 Reviews | Write Review
Full StarFull StarFull StarFull StarFull Starbuyer
by Coast from Costa Mesa, California on August 25, 2014
very good service
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Starrick
by Ricky from Wartburg, Tennessee on August 19, 2014
put in my boat that did not have gauges hardest thing was figuring out where I wanted it after install it works great looks nice along with the other gauges I installed
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarCoral Speedometer
by Carl from Zanesville, Ohio on July 15, 2012
Good match to the one I took out and works great. Easy to install.
(3 of 3 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarFaria Speedo Gauge
by Robert from Saskatoon, Saskatchewan on December 19, 2011
this was the second time I have purchased from Iboats, and once again no problems from start to finish!
(1 of 5 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star Based On 1 Review | Write Review
Full StarFull StarFull StarFull StarFull StarGreat Speedo
by Osvaldo from DeKalb, Illinois on June 09, 2013
This was easy to install and worked like a champ with my sending units. Great gauges.
Was this review helpful?
Q:
Does this fit in a 3 1/4 inch hole ?
A:
It requires a hole size of 3.375 inches.
Q:
Do you need anything else with this speedometer I don't currently have one but would like to install one?
A:
You can get the pitot with tubing: http://www.iboats.com/Speedometer-Pitot-And-Assembly-Faria-Instruments/dm/view_id.5042 For more info contact us at the number at the top of the page.
Q:
Does this come with the water pickup and tube?
A:
Unfortunately no, this just includes the speedometer itself.
Q:
Will this work on 2007 yahama 3 cyl mod 90tlr?
A:
It is a universal style made to fit based on design and dimensions. As long as the dimensions match up, this should work just fine.
Q:
I have a 1986 Johnson gt 150 will this work with my outboard?
A:
Yes. This is made to fit most Johnson/Evinrude motor applications.
Q:
1992 Evinrude V6 175HP will tache work for this motor?
A:
It is universal for all outboards. So yes this will work for your Evinrude. Just make sure hole cut-out is the size you need.
Q:
I have a 3 cyl 1986 50 hp 2 stroke outboard. Will I need a different harness? Will it work with my motor?
A:
According to our sources, this universal design should work just fine for your outboard.
Q:
What size is this gauge?
A:
2" - Hole size: 2.0625"
Q:
What about the sending unit?
A:
This does not come with the fuel sending unit. You need to purchase that separately if you need a new one: http://www.iboats.com/Marine-Fuel-Tank-Sending-Units/dm/view_id.238171
Q:
Will this tachometer work on a engine with electronic ignition?
A:
Yes it should work, just as long as your engine is a inboard or I/O and is gas powered.
Q:
Will this tach work with a 3 cyl Kobota?
Ask a question for
Question & Answer Guidelines
This product ships in 1 business day.

Add to Cart and enter your Postal Code to determine the shipping charges and estimated delivery date.
* Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies
Save More Now during the Summer Price Meltdown Sale!