Fiberglass No Sand Primer YPA200 is designed to eliminate the need to sand fiberglass prior to applying antifouling paint. It can also be used on epoxy primers to improve the adhesion of antifouling paint.

  • Fast drying
  • Eliminates the need to sand
  • Chemically bonds to fiberglass
  • It can be used on polyester, vinyl ester and epoxy
  • Can be applied by brush or roller. Do Not Spray

Do not use Fiberglass No Sand Primer with Micron 66, VC 17m, VC 17m Extra, Fiberglass Bottomkote Aqua, Micron Optima, VC Offshore, Baltoplate or any other water based or vinyl antifouling paints.

Technical Specifications
Area: Above or below the Waterline
Finish/Sheen: Low Gloss
Substrates: GRP/FRP
Suitable for Aluminum: No
Number of Coats: 1
Application Method: Brush
Application Method Recommended
No. of Coats
Practical Coverage
(sq. ft/Gal)
Brush 1 481
Roller 1 481