Keep Summer Going Strong with our August Sale Savings up to 50% OFF!

Floating Prop Wrench, 1-1/16" - Seasense

Seasense
Floating Prop Wrench, 1-1/16" - Seasense
Your Price: $7.75
Save: $1.74
(18% Off $9.49)
Part # 50073716 ValueShip™ Eligible
This item is found in the following Product Families
Floating Prop Wrench
Floating Prop Wrench
High impact plastic construction stands up to abuse and is impervious to corrosion. Plus, if it's accidentally dropped overboard, it floats for easy …

  • High impact plastic construction stands up to abuse and is impervious to corrosion.
  • Plus, if it's accidentally dropped overboard, it floats for easy retrieval.
  • Fits 1-1/16" prop nuts.
  • Average Customer Review for Floating Prop Wrench, 1-1/16" - Seasense
    Full StarFull StarFull StarFull StarEmpty Star Based On 27 Reviews | Write Review
    Full StarFull StarFull StarFull StarFull Starit worked good
    by Bradley from Meigs, Georgia on August 25, 2015
    Here quick
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull StarNice wrench
    by Douglas from Farmington, New Mexico on August 07, 2015
    Nice to have a dedicated wrench for the prop. This rust proof wrench will always be handy.
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Starworks great
    by Joel from Idaho Falls, Idaho on August 05, 2015
    Works great with new prop. Makes for easy installation. It also has a slot for the drain plug on the bottom of my boat.
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Starvery nice wrench
    by Mark from Reese, Michigan on August 02, 2015
    would recommend to anyone
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Starworked perfectly
    by John from Framingham, Massachusetts on July 28, 2015
    Very strong considering its lightweight fit the nut like a glove. Put a string through the handle, keep a boat hook handy, and you can put it down on the water!
    Was this review helpful?
    Full StarFull StarFull StarFull StarEmpty StarGood back up
    by Bart from Columbia, Tennessee on July 26, 2015
    The wrench was a nice wrench. I purchased this to use on the land and in the water for emergency but when I tightened my prop on the land the wrench wanted to strip a little so I put it in the boat for emergency. But has a great feel. Also my nut on my prop is shallow so that effected that too.
    Was this review helpful?
    Full StarEmpty StarEmpty StarEmpty StarEmpty StarProp Wrench
    by Mark from SAN Diego, California on July 20, 2015
    A floating prop wrench seemed like a good idea, but it is actually a floating P.O.S. I was not able to turn the nut because the plastic quickly and easily stripped. The nut was not on very tight as I was able to use a standard socket with just a little bit of pressure. Do not plan to use this unless your nut is only on finger tight.
    Was this review helpful?
    Full StarEmpty StarEmpty StarEmpty StarEmpty StarSinks in fresh water
    by Eric from Eustis, Florida on July 19, 2015
    My wrench is at the bottom of Lake Eustis, FL. It might float in salt water, but it went straight to the bottom in fresh water! I wish I could get a refund, but that's hard to do now...
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Starstrong and light
    by Pete from Butte, Montana on July 13, 2015
    nice
    Was this review helpful?
    Full StarEmpty StarEmpty StarEmpty StarEmpty Starprop wrench
    by Robert from East Helena, Montana on July 08, 2015
    Junk. Don't waste your time purchasing. Not worth shipping charges to return. Experienced mechanic, I should have known better.
    Was this review helpful?
    Full StarEmpty StarEmpty StarEmpty StarEmpty StarPlastic Wrench Stripped on First Try
    by Wesley from Montgomory, New York on July 07, 2015
    The wrench size was correct but plastic cannot take the stress of rotation and stripped on the first try. I had to go to Sears and buy a 1 1/4" steel socket to get the propeller nut off. Interestingly, it was not hard to rotate at all which confirms my criticism that plastic wrenches are a waste of $7.50. Unfortunately, the steel prop wrench was over $30.00 and did not seem worth it for the rare occasion of replacing a prop. I would recommend just buying a steel socket to do this task. It costs around $9.00. Ironically, it is not that much more than this worthless plastic wrench. Wes
    Was this review helpful?
    Full StarFull StarFull StarFull StarEmpty StarDoesn't float but perfect fit lightweight
    by Kevin from Duluth, Georgia on July 06, 2015
    Even though the wrench didn't float, it's lightweight and worked perfectly! I'd give it a 5* if it wasn't called a "Floating Prop Wrench!"
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull StarWorks
    by Shawn from North Pole, Alaska on July 05, 2015
    Wrench works like it should.
    Was this review helpful?
    Full StarFull StarFull StarFull StarEmpty StarFloating wrench
    by Phillip from Guttenberg, Iowa on June 26, 2015
    It works good just remember it's carbon fiber or plastic
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull StarWorked Great.
    by James from Waldo, Florida on June 26, 2015
    On time, Customer service worked with me on a shipping upgrade problem.
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull StarOne tough wrench
    by Donald from Campbell, Ohio on June 17, 2015
    At first I was very skeptical, I thought it would've very flimsy. The wrench is well built and is very durable.irs great to not have to worry about slipping off and losing the wrench.
    Was this review helpful?
    Full StarEmpty StarEmpty StarEmpty StarEmpty StarWrench does not fit
    by Alan from Cincinnati, Ohio on June 14, 2015
    Do not buy this wrench because the size is not correct. It is advertised as a 1-1/16" wrench. The wrench sent to me measures as a 1-1/8" Therefore it does not work. The wrench will slip before it will loosen or tighten the prop nut
    Was this review helpful?
    Full StarFull StarEmpty StarEmpty StarEmpty StarFLOATING PROP WRENCH
    by Donald from Auburn, New York on June 04, 2015
    USED JUST ONCE ON MERCURY 75 HP 4 STROKE PROP. THE EDGES OF THE WRENCH STARTED TO ROUND OFF.
    Was this review helpful?
    Full StarFull StarFull StarEmpty StarEmpty StarIt worked
    by Bradley from El Cajon, California on June 01, 2015
    It worked but im not sure for how many prop changes, next one might be questionable
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull StarPerfect
    by Mario from St-Jean-sur-Richelieu, Quebec on May 21, 2015
    The tool works great
    Was this review helpful?
    Full StarFull StarFull StarFull StarEmpty StarProp Wrench
    by Jay from Belgrade, Montana on May 20, 2015
    Works well for a plastic wrench.
    Was this review helpful?
    Full StarFull StarEmpty StarEmpty StarEmpty StarProp wrench
    by James from Atco, New Jersey on May 18, 2015
    I have 150 optimax motor the torque for the prop is suppose to be 80 ft lbs. there is no way I could take off or tighten with this wrench. I tried removing the nut and the wrench just slipped. At least the wrench being plastic it didn't strip the nut. I was not satisfied at all.
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull StarWorked just like it should.
    by Andie from Port Charlotte, Florida on May 06, 2015
    Worked like a wrench
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull StarLight weight but strong
    by David from Casper, Wyoming on April 08, 2015
    Used it as soon as I received it in the mail. Worked great.
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Starits a wrench and it floats
    by Dennis from Egg Harbor Township, New Jersey on June 23, 2014
    fit the nut and allowed me to turn it as advertized. I managed not to drop it into the water so I never was able to tests it floating capabilities, but I am confident it would have if I had.
    Was this review helpful?
    Full StarFull StarEmpty StarEmpty StarEmpty StarNot so much Floating
    by Johnny from Fisher Branch, Manitoba on June 21, 2011
    Good price, but tryed it in a rain barrel and it sinks like a rock!!!!
    (1 of 1 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull StarReview for Floating Prop Wrench, 1-1/16" - Seasense
    by a Customer on March 04, 2009
    Excellent service, great products at gtreat prices! I will be back!
    (3 of 7 people found this review helpful)
    Was this review helpful?
    Q:
    Will this wrench work for a 2014 evinrude e tec 30 HP outboard ?
    A:
    Unfortunately since we are aftermarket we cannot match up this by specific motor. It works for a 1-1/16 prop nut.
    Ask a question for
    Question & Answer Guidelines
    This product ships in 1 business day.
    Add to Cart and enter your Postal Code to determine the shipping charges and estimated delivery date.
    Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
    Standard Shipping Policies
    Save More Now and Keep the Summer of Boating Fun Going Strong!