Seasense
Floating Prop Wrench, 1-1/16" - Seasense
Your Price: $8.74
Save: $1.75
(16% Off $10.49)
Part # 50073716 2nd Day Air for $2 More Eligible
High impact plastic construction stands up to abuse and is impervious to corrosion. Plus, if it's accidentally dropped overboard, it floats for easy retrieval. Fits 1-1/16" prop nuts.
Average Customer Review for Floating Prop Wrench, 1-1/16" - Seasense
Full StarFull StarFull StarHalf StarEmpty Star
Based On 54 Reviews | Write Review
Full StarEmpty StarEmpty StarEmpty StarEmpty Star
DOESN'T FLOAT
by Trent from Sandwhich, Massachusetts on August 26, 2016
How is that the floating wrench doesn't float?? Also shocked to to see SH was almost as much as wrench, but prop ordered shipped for free next day. Waited 5 more days for non-floating floating wrench. VERY DISAPPOINTED, SAVE YOUR MONEY!
Was this review helpful?
Full StarEmpty StarEmpty StarEmpty StarEmpty Star
poor material
by John from San Francisco, California on August 23, 2016
The threads are warn out from trying to unlock the nut the first attempt. don't recommend it at all
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
floating wrench
by Floyd from Pierson, Florida on August 10, 2016
Works great have not tried the floating part yet but will assume it works great
Was this review helpful?
Full StarEmpty StarEmpty StarEmpty StarEmpty Star
Not useful
by Karen from East Syracuse, New York on August 01, 2016
The prop wrench does not float as advertised. Does not grip prop nut and slips when you turn the wrench. Not useful at all.
Was this review helpful?
Full StarFull StarFull StarEmpty StarEmpty Star
This is a ok product although I feel it should be built better.
by Thomas from Osseo, Minnesota on August 01, 2016
This product is ok in a pinch.
Was this review helpful?
Full StarEmpty StarEmpty StarEmpty StarEmpty Star
Does Not Float!
by Richard from Terre Haute, Indiana on July 31, 2016
As the product was named, I actually expected it to float in water. It does not!
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Nice wrench
by Jake from Fort Wayne, Indiana on July 21, 2016
Did the job just fine, I was able to apply the necessary torque to it and it didn't bend slip or distort. It's now stored in the boat with my spare prop for the emergency on water prop replacement. And it does float
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Perfect
by Steven from Sewell, New Jersey on July 14, 2016
Does the job. Since it floats, I don't have to worry about dropping it overboard. Its big enough to get some leverage but not too big for my toolbox. Good price.
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
Good for plastic
by Quinton from Weeki Wachee, Florida on July 12, 2016
I should have gotten the metal wrench. But this one works and is acceptable.
Was this review helpful?
Full StarEmpty StarEmpty StarEmpty StarEmpty Star
Floats but melts
by Lisa from Raleigh, North Carolina on July 07, 2016
Advantages of this are clear: It floats, and it should fit the prop nut it comes with. The disadvantage is more clear: the material is too soft and will warp like warm candle wax when you try to use it. I got it along with my hub assembly kit. I live in NC and yes it was hot, but it was still only spring, and not only did the nut not come loose at all, it deformed the inside of the wrench with very little force. I had to go to Home Depot and buy a metal prop wrench that did the job. Yes, that nut was on tighter than it should have been, but a wrench that melts and deforms is not worth the mold it's made from.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Prop wench
by Ray from Detroit, Michigan on July 06, 2016
Good
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Prop wrench
by John from Okeechobee, Florida on June 26, 2016
just what I required
Was this review helpful?
Full StarFull StarEmpty StarEmpty StarEmpty Star
Floating Prop Wrench does not float
by Anthony from Fort Walton Beach, Florida on June 17, 2016
The wrench works well but does not float.
Was this review helpful?
Full StarEmpty StarEmpty StarEmpty StarEmpty Star
It floats in the boat
by Dana from Plymouth, Minnesota on June 14, 2016
This product does not float. We tested it by standing in 3 feet of water and letting go of it. It slowly sank to the bottom. Not impressed with it.
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
Good wrench
by Rick from Chatfield, Minnesota on June 09, 2016
Perfect wrench for boating
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Perfect fit
by George from Anderson, South Carolina on June 02, 2016
Great wrench at a reasonable price. Carry it on the boat just in case.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Prop wrench
by Laura from Waynesboro, Georgia on May 28, 2016
Great tool.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
did its job
by Mark from Livonia, Michigan on May 24, 2016
replaced my new prop with this wrench- will leave it in my boat for emergency
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
Good back up wrench
by Ronald from New Bloomfield, Missouri on May 13, 2016
Wrench works good, fast delivery. Thanks
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
it worked
by Thomas from Austin, Texas on April 30, 2016
I was a bit skeptical about a floating plastic wrench. It worked fine, however,. I withheld a star because I have doubts about long term durability. Also, I never checked to see if it actually floats!
Was this review helpful?
Full StarFull StarFull StarEmpty StarEmpty Star
Worked but not the best
by Patrick from Lathrop, California on April 24, 2016
Got the job done bit does not fit tight on bolt will strip out easily
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Good product!
by Eric from Martensville, Saskatchewan on October 20, 2015
this wrench is exactly what it describes. Floats, tightens the nut down, and I've noticed that the wrench actually starts to bend once you've reached the manufacturers torque...I know because I've used this tool followed by the torque wrench and its nearly bang on.
Was this review helpful?
Full StarFull StarFull StarEmpty StarEmpty Star
Not Bad For The Price
by Art from Big River, California on October 19, 2015
It works for the best part but it doesn't float.
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
I like it.
by Michael from Elbridge, New York on September 27, 2015
Was a little hesitant because of some negative reviews. But I used it to install a prop I just got(from I boats) it fit nice and tight on the nut,it removed and installed nut perfectly. This works great. Maybe people have the nut way over torqued?
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
great tool, worked prefectly
by David from Hugo, Minnesota on September 09, 2015
great advice to purchase this along with a prop
Was this review helpful?
Full StarEmpty StarEmpty StarEmpty StarEmpty Star
wrench
by Ronald from Theresa, New York on September 05, 2015
wrong size, did not know size until I pulled the boat
(1 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarEmpty StarEmpty StarEmpty Star
Does not float
by Brent from Grove, Oklahoma on August 30, 2015
Wrench does not float, not even for a little while. If you drop it, it's gone!
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
it worked good
by Bradley from Meigs, Georgia on August 25, 2015
Here quick
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Nice wrench
by Douglas from Farmington, New Mexico on August 07, 2015
Nice to have a dedicated wrench for the prop. This rust proof wrench will always be handy.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
works great
by Joel from Idaho Falls, Idaho on August 05, 2015
Works great with new prop. Makes for easy installation. It also has a slot for the drain plug on the bottom of my boat.
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
very nice wrench
by Mark from Reese, Michigan on August 02, 2015
would recommend to anyone
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
worked perfectly
by John from Framingham, Massachusetts on July 28, 2015
Very strong considering its lightweight fit the nut like a glove. Put a string through the handle, keep a boat hook handy, and you can put it down on the water!
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
Good back up
by Bart from Columbia, Tennessee on July 26, 2015
The wrench was a nice wrench. I purchased this to use on the land and in the water for emergency but when I tightened my prop on the land the wrench wanted to strip a little so I put it in the boat for emergency. But has a great feel. Also my nut on my prop is shallow so that effected that too.
Was this review helpful?
Full StarEmpty StarEmpty StarEmpty StarEmpty Star
Prop Wrench
by Mark from SAN Diego, California on July 20, 2015
A floating prop wrench seemed like a good idea, but it is actually a floating P.O.S. I was not able to turn the nut because the plastic quickly and easily stripped. The nut was not on very tight as I was able to use a standard socket with just a little bit of pressure. Do not plan to use this unless your nut is only on finger tight.
Was this review helpful?
Full StarEmpty StarEmpty StarEmpty StarEmpty Star
Sinks in fresh water
by Eric from Eustis, Florida on July 19, 2015
My wrench is at the bottom of Lake Eustis, FL. It might float in salt water, but it went straight to the bottom in fresh water! I wish I could get a refund, but that's hard to do now...
(2 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
strong and light
by Pete from Butte, Montana on July 13, 2015
nice
Was this review helpful?
Full StarEmpty StarEmpty StarEmpty StarEmpty Star
prop wrench
by Robert from East Helena, Montana on July 08, 2015
Junk. Don't waste your time purchasing. Not worth shipping charges to return. Experienced mechanic, I should have known better.
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarEmpty StarEmpty StarEmpty StarEmpty Star
Plastic Wrench Stripped on First Try
by Wesley from Montgomory, New York on July 07, 2015
The wrench size was correct but plastic cannot take the stress of rotation and stripped on the first try. I had to go to Sears and buy a 1 1/4" steel socket to get the propeller nut off. Interestingly, it was not hard to rotate at all which confirms my criticism that plastic wrenches are a waste of $7.50. Unfortunately, the steel prop wrench was over $30.00 and did not seem worth it for the rare occasion of replacing a prop. I would recommend just buying a steel socket to do this task. It costs around $9.00. Ironically, it is not that much more than this worthless plastic wrench. Wes
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
Doesn't float but perfect fit lightweight
by Kevin from Duluth, Georgia on July 06, 2015
Even though the wrench didn't float, it's lightweight and worked perfectly! I'd give it a 5* if it wasn't called a "Floating Prop Wrench!"
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Works
by Shawn from North Pole, Alaska on July 05, 2015
Wrench works like it should.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Worked Great.
by James from Waldo, Florida on June 26, 2015
On time, Customer service worked with me on a shipping upgrade problem.
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
Floating wrench
by Phillip from Guttenberg, Iowa on June 26, 2015
It works good just remember it's carbon fiber or plastic
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
One tough wrench
by Donald from Campbell, Ohio on June 17, 2015
At first I was very skeptical, I thought it would've very flimsy. The wrench is well built and is very durable.irs great to not have to worry about slipping off and losing the wrench.
Was this review helpful?
Full StarEmpty StarEmpty StarEmpty StarEmpty Star
Wrench does not fit
by Alan from Cincinnati, Ohio on June 14, 2015
Do not buy this wrench because the size is not correct. It is advertised as a 1-1/16" wrench. The wrench sent to me measures as a 1-1/8" Therefore it does not work. The wrench will slip before it will loosen or tighten the prop nut
Was this review helpful?
Full StarFull StarEmpty StarEmpty StarEmpty Star
FLOATING PROP WRENCH
by Donald from Auburn, New York on June 04, 2015
USED JUST ONCE ON MERCURY 75 HP 4 STROKE PROP. THE EDGES OF THE WRENCH STARTED TO ROUND OFF.
Was this review helpful?
Full StarFull StarFull StarEmpty StarEmpty Star
It worked
by Bradley from El Cajon, California on June 01, 2015
It worked but im not sure for how many prop changes, next one might be questionable
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Perfect
by Mario from St-Jean-sur-Richelieu, Quebec on May 21, 2015
The tool works great
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
Prop Wrench
by Jay from Belgrade, Montana on May 20, 2015
Works well for a plastic wrench.
Was this review helpful?
Full StarFull StarEmpty StarEmpty StarEmpty Star
Prop wrench
by James from Atco, New Jersey on May 18, 2015
I have 150 optimax motor the torque for the prop is suppose to be 80 ft lbs. there is no way I could take off or tighten with this wrench. I tried removing the nut and the wrench just slipped. At least the wrench being plastic it didn't strip the nut. I was not satisfied at all.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Worked just like it should.
by Andie from Port Charlotte, Florida on May 06, 2015
Worked like a wrench
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Light weight but strong
by David from Casper, Wyoming on April 08, 2015
Used it as soon as I received it in the mail. Worked great.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
its a wrench and it floats
by Dennis from Egg Harbor Township, New Jersey on June 23, 2014
fit the nut and allowed me to turn it as advertized. I managed not to drop it into the water so I never was able to tests it floating capabilities, but I am confident it would have if I had.
Was this review helpful?
Full StarFull StarEmpty StarEmpty StarEmpty Star
Not so much Floating
by Johnny from Fisher Branch, Manitoba on June 21, 2011
Good price, but tryed it in a rain barrel and it sinks like a rock!!!!
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Review for Floating Prop Wrench, 1-1/16" - Seasense
by a Customer on March 04, 2009
Excellent service, great products at gtreat prices! I will be back!
(3 of 7 people found this review helpful)
Was this review helpful?
Q:
Will this fit on a SUZUKI 150 HP Outboard ???
A:
Manufacturer confirms yes it will work with your motor.


Q:
Will this work for a Merc Verado 150?
A:
This should be the size for your motor.


Q:
Will this wrench work for a 2014 evinrude e tec 30 HP outboard ?
A:
Unfortunately since we are aftermarket we cannot match up this by specific motor. It works for a 1-1/16 prop nut.


Ask a question
Question & Answer Guidelines
This product ships in 1 business day.
Add to Cart and enter your Postal Code to determine the shipping charges and estimated delivery date.
Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies