099 Side Gunwale Removable Utility/Fighting Seat with Gimbal - Garelick
Price: $244.51
Save: $75.48
(23% Off $319.99)
Part # 48099-01
2nd Day Air for $2.99 More Eligible
099 Side Gunwale Removable Utility/Fighting Seat without Gimbal - Garelick
Price: $225.73
Save: $59.26
(20% Off $284.99)
Part # 48104-01
2nd Day Air for $2.99 More Eligible
No Reviews


  • Provides extra seating in the cockpit.
  • Mounts on either starboard or port side - Shur Loc catches (76000) provide permanent or temporary mounting
  • Firm 2.5" (6cm) thick resilient foam
  • Marine grade white vinyl covered seat 18" x 16" (46 x 41cm)
  • Anodized aluminum tube frame
  • Hypalon cushioned support leg
  • Folds flat, maximum height 24" (61cm)

48099 : With chrome plated brass gimbal
48104 : Without gimbal

Technical Documentation

Installation Instructions for Side Gunwale Utility/Fighting Seat, Model 48099

Installation Instructions for Side Gunwale Utility/Fighting Seat, Model 48099

  1. This seat is designed to be mounted to the port or starboard bulkhead in the cockpit area as shown (Fig. 1).
  2. The maximum mounting height is approximately 24" and can be adjusted lower by cutting the Leg 'U' (G). When cutting to length, cut small increments to avoid cutting off too much tube. Caution: for maximum support, leg 'U' (G) should be angled at 45 degrees back to the coaming perpendicular as illustrated.

Gimbal Attachment

  1. Determine on which side of boat (port or starboard) seat is to be mounted.
  2. Remove seat cushion (A) from support tube frame (B) by removing four 1/4"-20 screws (C).
  3. Attach gimbal (D) at point shown on either side of frame - depending on port or starboard installation - so that when mounted, the gimbal will face the transom of the boat.
  4. Re-attach seat cushion (A) to support tube frame (B).

Side Gunwale Utility Seat

Mounting Instructions

  1. Slip Shur-Ioc catches (E) onto ends of both seat supports. Position and mark four mounting holes on side coaming. Secure Shur-Ioc catches in position by drilling four holes with a 9/64" bit and using screws (F). Note: Larger opening must face up and rubber gasket must be inside catch for proper operation.
  2. Attach seat to boat by inserting latch bolts on the seat support frame (B) into large opening of catch slot (E) and slide seat down. Seat should sit level to deck. To remove seat, pull seat up and then out of catch socket.

To store seat compactly, detach seat frame (B) from Shurloc catches (E). Remove the leg 'U' (G) from leg support and fold in.

Side Gunwale Fighting Seat

When installed, what is the measurement from the outside edge of the Shurloc catch to the outside edge of the other Shurloc catch? Trying to figure out if I have room for 2 - have 33" to work with.?
According to Garelick, the approximate measurements between the Shurloc catches is 16 inches.

Ask a question
Question & Answer Guidelines
This product ships in 5 business days.
Add to Cart and enter your Postal Code to determine the shipping charges.
Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies

Please be careful when ordering this product, it has limitations that differ from our General 30-day Return Policy. After all, we want you to be satisfied with your order so you'll return again and again as an iboats.com customer, and to also recommend us to your boating friends

All seat returns are subject to a 15-25% restocking charge. The item(s) must be in clean and resalable condition otherwise the return will be denied.

See our complete return policy.