Features:
- Classic arm chair comfort!
- High density polyethylene seat and back substrates
- Thick back cushion for greater back support. Modified seat cushion adds 1.5" of extra pitch front to back for maximum comfort
- Removable cushions snap to frame
- Extra strength from through bolted hardware, tough anodized extrusions and stainless steel fasteners
- Includes chrome plated brass gimbal
- Stable quad base comes with 360° swivel and locking rod. Base made from 1" diameter anodized aluminum with HDPE platform and rubber chair tips
48485 : W: 26" (66cm), D: 20.5" (52cm), H: 32" (81cm)
Technical Documentation
Assembly and Installation Instructions for Seat Slides
Features and Compatibility
Assembly and Installation Instructions for Seat Slides |
| NOTE: This product comes in two separate cartons. One
contains the seat cushions; the seat base is in the other. |
Assembly Instructions
Refer to Fig. 1 - Position your spider on the slideplate (A) so the spider’s knob (B) will be opposite the locking hole (C).
- Align the 4 slotted holes in both the spider casting and the slideplate, insert screws (D) through the slideplate and the spider casting. Secure in position with washers (E) and locknuts (F).
|
 |
Refer to Fig. 2A or 2B - Position the trackplate (B) on your seat’s bottom.
- Align the holes in both the seat and trackplate. Secure the trackplate to your seat with appropriate hardware. NOTE: Fastener Suggestion is illustrated. Mounting hardware is provided with some slide models. NOTE: All EEZ-In seats use 1⁄4"-20 threaded T-nuts.
|
 |
SPECIAL NOTE: When attaching a slice to an EEZ-In rotational molded seat: - Remove the reinforcement brackets from the seat bottom prior to installation.
- Make certain that the portion of the screw entering the seat shell’s T-nut does not exceed 3/8". Seat
shell T-nuts are 1⁄4"-20 thread. Use only 1⁄4"-20 machine screws.
|
 |
Refer to Fig. 3 - Pull the packing tape off the trackplate’s locking nut (H) and align the holes in the nut and poly sleeve if necessary.
- Slip the slideplate (A) onto the trackplate (G) as shown.
- Align the holes in the locking nut and sideplate. Slip the stainless steel washers (I) and the poly washer (J) onto the locking knob (K). Insert the locking knob into the slide plate’s hole and thread it into the locking nut. Secure the slide in position.
|
 |
This product ships in 5 business days.
To determine the shipping cost and estimated delivery date for this item click Add to Cart, then click Calculate Shipping inside your shopping cart.
Standard Shipping Policies
Please be careful when ordering this product, it has limitations that differ from our General 30-day Return Policy. After all, we want you to be satisfied with your order so you'll return again and again as an iboats.com customer, and to also recommend us to your boating friends
- Seats
- All seat returns are subject to a 15-25% restocking charge. The item(s) must be in clean and resalable condition otherwise the return will be denied.
See our complete return policy.
Shopping Cart (0 items)