Garelick Aluminum Auxiliary Motor Bracket For 4-Stroke Motors

Aluminum Auxiliary Motor Bracket for up to 169 lbs 4-Stroke Motors 7-1/2 to 30hp, 9-1/2" Travel - Garelick
Your Price: $280.49
Save: $49.50
(15% Off $329.99)
Part # 71090 ValueShip™ Eligible
SHIPS TOMORROW!* if ordered in 23 hrs 58 mins.
No Reviews | Write Review | Ask Question
SHIPS TOMORROW!* if ordered in 23 hrs 58 mins.
No Reviews | Write Review | Ask Question
Auxiliary Aluminum Motor Bracket for 4 Stroke - Garelick
Your Price: $280.49
Save: $49.50
(15% Off $329.99)
Part # 71093 ValueShip™ Eligible
SHIPS TOMORROW!* if ordered in 23 hrs 58 mins.
No Reviews | Write Review | Ask Question
Garelick

The Garelick Aluminum Bracket is designed to effortlessly raise and lower a trolling/auxiliary motor. Featuring an anodized aluminum construction, this bracket is ideal for use with 4-stroke high torque motors. This bracket has an extra wide black poly mounting board to accommodate wide motor locking clamps. Its 5-position lock bar allows for a range trim adjustments to compensate the water surface and boat load conditions.

This bracket is securely held in its place with ergonomically-designed twist lock safety knobs. The built-in stainless steel torsion springs counterbalance the motor’s weight. It includes stainless steel hardware with nylon friction-resistant washers for easy and secure attachment.

  • For long/short shaft motors
  • Built especially for 4-stroke high torque motors
  • Raise and lower trolling and auxiliary motor with ease

Features of Garelick Aluminum Auxiliary Motor Bracket

  • Raise and lower trolling and auxiliary motors with ease
  • Extra wide black poly mounting board for wide motor locking clamps
  • Accommodates long or short shaft motors
  • Motor safety cable included for added protection
  • 5 vertical running position lock bar to compensate for water surface and boat load conditions
  • Ergonomically-designed twist lock safety knobs secure bracket in place
  • Heavy-duty stainless steel torsion springs counterbalance motor's weight
  • Black satin anodized aluminum body resists corrosion
  • Maintenance free
  • Aircraft type stainless steel hardware with nylon friction-resistant washers

Specifications

Manf. Part # 71090

  • H.P. rating: Over 7 1/2 to 30
  • Motor weight not to exceed: 169 lbs
  • Vertical travel: 9 1/2" (24cm)
  • Poly mounting board dimensions W x H x T: 11 1/2" x 10 3/4" x 2"

Manf. Part # 71091

  • H.P. rating: Over 7 1/2 to 25
  • Motor weight not to exceed: 175 lbs.
  • Vertical travel: 15 1/2" (39cm)
  • Poly mounting board dimensions W x H x T: 11 1/2" x 12" x 2"

Manf. Part # 71093

  • H.P. rating: Up to 15 HP.
  • Motor weight not to exceed: 115 lbs.
  • Vertical travel: 9 1/2" (24cm)
  • Poly mounting board dimensions W x H x T: 11 1/2" x 10 3/4" x 2"
Technical Documentation

Mounting and Operating Instructions for Heavy Duty Outboard Motor Bracket Models 71090 and 71091

Features and Compatibility

Aluminum Auxiliary Motor Bracket for up to 169 lbs 4-Stroke Motors 7-1/2 to 30hp, 9-1/2" Travel - Garelick

71090: H.P. Rating: Over 7 1/2 to 30 Motor Weight Not to Exceed: 169 lbs. Vertical Travel*: 9 1/2 (24cm) Mtg. Pad: Poly Mounting Board Dimensions W x H x T: 11 1/2 x 10 3/4 x 2 (29 x 27 x 5cm)

*Vertical travel is based on transom angle being perpendicular to the water.

Features:

  • Raise and lower trolling and auxiliary motors on power and sailboats with ease
  • Built especially for new 4 Stroke, heavier, high torque motors
  • Extra Wide 11 1/2" (29cm) Black Poly Mounting Board for new, wider style motor locking clamps used on late model outboard motors
  • Accommodates long or short shaft motors
  • Motor Safety Cable included for added protection
  • With 5 vertical running position lock bar to compensate for water surface and boat load conditions - Hard coated for added resistance to wear
  • New, ergonomically designed twist lock safety knobs secure bracket in place
  • Heavy-duty stainless steel torsion springs help counterbalance motor's weight
  • Easier to hold with comfortable, soft Hypalon grip handle designed to accept most style outboard motor locks
  • Black satin Anodized aluminum body resists corrosion - Dubbed the "Black Beauty" Outboard Motor Bracket
  • 2" Thick, Extra Wide Black Poly Mounting Board - Weatherable and maintenance free
  • Aircraft Type Stainless Steel Hardware - For increased durability with nylon friction resistant washers

Aluminum Auxiliary Motor Bracket for up to 175 lbs 4-Stroke Motors 7-1/2 to 25hp, 15-1/2" Travel - Garelick

71091: H.P. Rating: Over 7 1/2 to 25 Motor Weight Not to Exceed: 175 lbs. Vertical Travel*: 15 1/2 (39cm) Mtg. Pad: Poly Mounting Board Dimensions W x H x T: 11 1/2 x 12 x 2 (29 x 30 x 5cm)

*Vertical travel is based on transom angle being perpendicular to the water.

Features:

  • Raise and lower trolling and auxiliary motors on power and sailboats with ease
  • Built especially for new 4 Stroke, heavier, high torque motors
  • Extra Wide 11 1/2" (29cm) Black Poly Mounting Board for new, wider style motor locking clamps used on late model outboard motors
  • Accommodates long or short shaft motors
  • Motor Safety Cable included for added protection
  • With 5 vertical running position lock bar to compensate for water surface and boat load conditions - Hard coated for added resistance to wear
  • New, ergonomically designed twist lock safety knobs secure bracket in place
  • Heavy-duty stainless steel torsion springs help counterbalance motor's weight
  • Easier to hold with comfortable, soft Hypalon grip handle designed to accept most style outboard motor locks
  • Black satin Anodized aluminum body resists corrosion - Dubbed the "Black Beauty" Outboard Motor Bracket
  • 2" Thick, Extra Wide Black Poly Mounting Board - Weatherable and maintenance free
  • Aircraft Type Stainless Steel Hardware - For increased durability with nylon friction resistant washers

Auxiliary Aluminum Motor Bracket for 4 Stroke - Garelick

Raise and lower trolling and auxiliary motors on power and sailboats with ease. Built especially for new 4-stroke, heavier, high torque motors. Extra Wide black poly mounting board for new, wider style motor locking clamps. Accommodates long or short shaft motors. Hard coated for added resistance to wear. Heavy-duty stainless steel torsion springs that help counterbalance motor's weight. 2" thick weatherable and maintenance free mounting board . Two positive safety locks secure bracket in up position. Easier to hold handle with comfortable, soft Hypalon grip. Motor safety cable included for added protection. HP rating to 15hp. Motor weight not to exceed 115 lbs

Ask a question for
Question & Answer Guidelines
This product ships in 1 business day.

Add to Cart and enter your Postal Code to determine the shipping charges and estimated delivery date.
* Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies