Garelick Locking Stainless Steel Seat Swivels

Black Powder Coated Locking Steel Seat Swivel, 7 x 7 - Garelick
Your Price: $28.15
Save: $4.34
(13% Off $32.49)
Part # 75116 ValueShip™ Eligible
No Reviews  |  Write Review  |  Ask Question
Locking Stainless Steel Seat Swivel, 7 x 7 - Garelick
Your Price: $37.47
Save: $3.52
(8% Off $40.99)
Part # 75120 ValueShip™ Eligible

Boat seating just got more comfortable with the Garelick Locking Seat Swivel that offers 360° rotation. The handle locks in 12 positions at 30° increments, allowing you to customize the seat according to your requirements. This seat swivel is made of high-quality stainless steel and features a center rivet made of the same material.

Designed to fit standard hole patterns, this seat swivel is easy to install. It features self-lubricating poly swivel bearings that are non-corrosive. Available in stainless and black powder coated steel.

  • Made of 304 stainless steel
  • Features stainless steel center rivet
  • Fits standard hole patterns

Features of Garelick Locking Stainless Steel Seat Swivel

  • Self-lubricating swivel bearings
  • 12 position lock at 30 degree increments
  • 360° rotation


Manf. Part # 75116

  • Dimensions: 7" x 7"
Full StarFull StarFull StarFull StarEmpty Star Based On 6 Reviews | Write Review
Full StarEmpty StarEmpty StarEmpty StarEmpty StarBEWARE BASE IS NOT STAINLESS!!!
by Robert from Souderton, Pennsylvania on September 07, 2015
I reviewed this product after only a few weeks on my boat. The bottom base is not stainless! I had thought that this was just a passivation problem (a coating of iron on top of the stainless) wrong... I think that the stainless bases were not used on the two units that I bought. I plan to return this junk and have them replaced, trouble is it takes about an hour per seat to remove and reinstall. I'll check with a magnet next time. I wish that I could post a photo, the rust is making a mess of my white bench. PLEASE CHECK THE MATERIAL OF THESE SWIVELS!!!
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty StarBetter than steel
by Robert from Souderton, Pennsylvania on August 25, 2015
Bought these stainless steel versions to replace the plain powder coated swivels that were on my ocean going boat for the past two years. After two years the plain steel units were rusting and losing pain and worse the locking tab was bent and would not engage (passengers on the boat don't know how to use these and can get rough) The ball bearing swivel was rusty and the entire mechanism was lose! After two years of light use. The Stainless version was a direct drop in replacement, instead of ball bearings a hard plastic bearing is used, I know it wont far its smooth. I've noticed that in less than one month the bottom of the base has begun to rust all over, I don't think this is serious because the parts are probably not passivized and this is jus the surface iron and it may not get much worse. Overall good product, somewhat disappointed about the rust, a appearance and we'll see how the single rivet and plastic bearing hold up over time
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Starlen
by Len from Island Park, Idaho on July 25, 2015
(0 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty StarProduct is as pictured and advertised
by Don from Conroe, Texas on June 25, 2015
It looks well built and replaced a unit that had been on the boat for 10 years. Stainless if the only way to go for offshore boats.I can't give it a 5 until I see how it weathers.
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarGreat upgrade for worn/rusted seat mounts
by Nicholas from Brandon, Mississippi on June 14, 2015
I recently started repairing and customizing my StumpknockerII and wanted to keep the original look but add some functionality. The original seat swivels were beyond saving and the captain's chair had actually pulled out of the hull screws and all. So after making the repairs I decided to opp for all new hardware. I found this locking version of the original swivel and really liked the idea. Its annoying to spin oneself while steering the boat. I drilled pilot holes to screw it into the boat and the mount bolted to my existing chair flawlessly. It looks great and the handle hides just below the corner of the seat. You can easily unlock it with two fingers and spin to you desired position. Its very s y and comes with a warning sticker for the chair.
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarHigh Quality
by William from Tucson, Arizona on July 27, 2014
These were installed on the bench seat of a Boston Whaler 130 Super Sport. The seat swivel appears to be well constructed and functions smoothly. The only issue was that the bolt pattern did not match the pattern on a pair of Wise seats which required new holes being drilled thru the seat mount. No fault of the seat swivel.
(2 of 2 people found this review helpful)
Was this review helpful?
What are the measurements between the mounting holes?
It fits industry standard patterns which are 5-1/4" bolt pattern.
Ask a question for
Question & Answer Guidelines
This product ships in 1 business day.
Add to Cart and enter your Postal Code to determine the shipping charges and estimated delivery date.
Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies