Garelick Toggler Brand Stainless Steel Toggle Bolt Anchors

1/4"-20 Size Stainless Steel Toggle Bolt Anchors, 6 pack - Garelick
Your Price: $34.64
Save: $7.15
(17% Off $41.79)
Part # 21026 ValueShip™ Eligible
1/4"-20 Size Stainless Steel Toggle Bolt Anchor - Garelick
Your Price: $5.09
Save: $0.90
(15% Off $5.99)
Part # 21021 ValueShip™ Eligible
1/4"-20 Size Stainless Steel Toggle Bolt Anchors, 1 pair - Garelick
Your Price: $15.29
Save: $2.70
(15% Off $17.99)
Part # 21022 ValueShip™ Eligible
Metric 6M Size Stainless Steel Toggle Bolt Anchor - Garelick
Your Price: $5.09
Save: $0.90
(15% Off $5.99)
Part # 21025 ValueShip™ Eligible
No Reviews | Write Review | Ask Question
Garelick

Installing a pedestal seat in your boat is no longer a difficult task thanks to Garelick Toggler Bolt Anchors. These anchors made of stainless steel not only add strength to your pedestal installation, but also save you time and labor.

These steel toggle bolt anchors are designed to work with all Garelick seat pedestal bases. They require a deck or cabin of 3/8" to 3 5/8" thickness for safe installation. These anchors fit into 1/2" holes.

  • Positively locks seats and tables bases to decks or attaches any accessory to cabin walls
  • Made of 304 stainless steel
  • Saves time and labor involved in pedestal installation

Features of Garelick Toggler Brand Stainless Steel Toggle Bolt Anchors:

  • Firmly locks seat and table bases to decks
  • Secures any accessory to cabin walls
  • Provides added strength to the pedestal installation
  • Saves time and labor during pedestal installations
  • Works with all Garelick seat pedestal bases

Specifications:

Manf. Part # 21026

  • Includes 6 anchors
  • Anchor size: 1/4"-20
  • Application: Only for mounting any model pedestal seat
  • Comes in a poly bag with header card

Manf. Part # 21021

  • Includes: Anchor only
  • Anchor size: 1/4"-20

Manf. Part # 21022

  • Quantity: 1 pair
  • Anchor size: 1/4"-20

Manf. Part # 21025

  • Anchor size: 6mm
  • Required hole size: 13mm
1/4"-20 Size Stainless Steel Toggle Bolt Anchors, 6 pack - Garelick
1/4"-20 Size Stainless Steel Toggle Bolt Anchors, 6 pack - Garelick
1/4"-20 Size Stainless Steel Toggle Bolt Anchor - Garelick
1/4"-20 Size Stainless Steel Toggle Bolt Anchor - Garelick
1/4"-20 Size Stainless Steel Toggle Bolt Anchors, 1 pair - Garelick
1/4"-20 Size Stainless Steel Toggle Bolt Anchors, 1 pair - Garelick
Metric 6M Size Stainless Steel Toggle Bolt Anchor - Garelick
Metric 6M Size Stainless Steel Toggle Bolt Anchor - Garelick
Based On 5 Reviews | Write Review
1/4"-20 Size Stainless Steel Toggle Bolt Anchors, 6 pack - Garelick
by Michael from Hilton Head Island, South Carolina on October 08, 2014
Once the Toggle is in place it is great. The nylon strips could be a little stronger as the tend to break before the toggle is secure. This is my second set. The first ones have been in use for about 3 years in a sal er environment and are still holding strong. All in all a very good product.
Was this review helpful?
Garelick Toggles
by Gary from Lake Park, Georgia on August 18, 2013
Great for trolling motors.
Was this review helpful?
Toggle Bolt Anchors
by Russell from Port Neches, Texas on July 20, 2012
These work great. My only complaint is they are too pricy for what you get.
(1 of 1 people found this review helpful)
Was this review helpful?
Easy to use
by Lewis from Jefferson City, Missouri on November 07, 2011
I used a six pack of these to add another pedestal base to a boat with a 1/2 inch plywood floor. I had installed other bases before putting the floor in, but these seemed like the best option for installing once the floor was riveted in. One cautionary note: if there is flotation foam all the way up to the underside of the floor, you need to remove it to about an inch below the surface and about an inch in diameter. This will give you space to swivel the toggles flush with the underside of the floor. Once I figured that out, installation was a breeze. I chucked a hex key (L-shaped) with the long leg in a drill, inserted the short leg in the hole, and chewed the foam up below the hole so I could install the toggles. Plenty of polyurethane adhesive (3M 5200 or equivalent) completed the installation. I haven't yet put it to a stress test, but I just can't see the toggles pulling through the plywood.
(6 of 6 people found this review helpful)
Was this review helpful?
Anchors Worked Great
by Thad from Shrezeport, Louisiana on June 30, 2011
These anchors worked very well and were easy to use. A well designed product. I don't think the seat I used them on will ever move again. My only complaint is the price. I think the price is too high because it's a "marine" product. But I wasn't able to find another alternative so I guess you have to pay the price.
(4 of 4 people found this review helpful)
Was this review helpful?
Based On 1 Review | Write Review
Stainless steel toggle bolt anchor
by Wayne from New Harmony, Indiana on May 11, 2013
Used these to anchor some Garelick bases for installation of Garelick slider/swivels for an upgrade to boat seats. These are kind of pricey for " just bolt anchors " but they are very slick in how they allow you to install them in a hole and even pull the back out and nice that they stay there if you remove the bolt later on instead of falling down inside. Again,I think they are overpriced, but you'll forget soon after you use them!
(4 of 5 people found this review helpful)
Was this review helpful?
Based On 1 Review | Write Review
Excellent Product
by David from Virginia Beach, Virginia on November 24, 2013
I used these to anchor my toolboxes in my truck. Worked like a champ.
Was this review helpful?
Ask a question for
Question & Answer Guidelines
This product ships in 1 business day.

Add to Cart and enter your Postal Code to determine the shipping charges and estimated delivery date.
* Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies