Gimbal Bearing - Sierra

The gimbal bearing fit fine. Removal was a little more challenging. Went to Autozone and got a loaner bearing puller and slide hammer which worked well. An alignment tool is necessary to loosen the new bearing and properly align the shaft. The Sierra gasket set gets a thumbs down for the gimbal bearing 'o' rings that go on the shaft. They were slightly over sized and made installation of the outdrive impossible. Bought an OEM gasket kit and installed with 'o' rings with oil as shown in manual and had no problems replacing drive with one person and no hoist.

well someones having a bad day or bad week or bad month, I have ordered and returned 2 of these in a row because of poor manufacturing, bearing is off center, and misaligned, apparently who ever is stamping these out, is allowed to drink beer on lunch hour, Or Sierra has no quality control program. ON both bearings I received it is so misaligned you can see it plain as day one side of the insert is about 0.1 inches offset from the other side. In other words if you spin it around it will wobble about 0.100 inches,

worked fine once it was lined up.

Received just what was ordered on a timely manner, thank you.

Received just what was ordered in a timely manner, thank you.