Gluvit Epoxy Waterproof Sealer, 8lb - ITW Philadelphia Resins
An 8 lb unit covers 100-130 square feet at when applied at 6 to 8 mils.
Gluvit barrier coat seals and protects hulls and decks. Provides superior protection for fiberglass, wood, aluminum, and steel. Seals leaky seams and rivets in aluminum hulls, and leaks around fiberglass cabins or decks. Hard protective coating flexes with hull movements to bridge and seal hairline cracks.
Gluvit fills minor cracks and pinholes. Its long working time allows penetration into cracks to seal and strengthen. Acts as a barrier coat to minimize water absorption and galvanic corrosion. Deteriorated wood can be renewed with a few strokes to penetrate and strengthen stringers, decking and molding.
On wooden hulls, Gluvit seals and protects planks and sheeting against water absorption and damage from marine parasites. On aluminum hulls, Gluvit seals seams and rivets and acts as a barrier coat to minimize galvanic corrosion. On jet skis, rowboats and canoes, Gluvit provides abrasion resistance to protect hull sides and bottoms from damage by grounding on beaches or rocks.
For maximum ultraviolet protection, Gluvit must be painted after cure. Before overcoating, lightly sand this waterproof epoxy sealer to ensure adhesion. Any pigmented epoxy, urethane, latex or alkyd base paint can be used to overcoat Gluvit.
This product ships in 1 business day.
Standard Shipping Policies