Goldspar® Satin Varnish (Interlux)
- Goldspar quality interior varnish with a satin finish
- Good flow-out and fast drying for easier application
- Produces a warm, rich sheen finish which resists scratches and alcohol stainsresistant
- For interior use: counters, cabinets and tables
- Excellent handling qualities enable truly professional results
Wood Care Systems
Wood has a beauty that good maintenance will enhance and protect. Interlux has several systems for caring for the wood on your boat. All of the systems will provide a barrier to protect your boat against the elements which attack the surface during the season - sea, sun, rain and wind while enhancing the natural appearance of the wood.
Varnishes provide excellent protection for the wood on your boat while allowing the natural beauty of the wood to show through. Varnishes are made up of five specific ingredients: oil, resin, solvent, dryers and additives. The combination of these five determines a varnish's performance.
Goldspar® Satin is a low luster modified urethane varnish designed for application to interior wood surfaces. Can be applied by brush or spray.
|Common Problems||Perfection Varnish||Schooner®||Goldspar Clear||Goldspar Satin||Original|
|High-Gloss, Professional Looking Finish||YES||YES||YES||NO||YES|
|Best for Interior Wood||★★★★★||★★★★★||★★★★★||★★★★★||★★★|
|Best Scratch Resistant, Exterior Decking||★★★★★||★★★★||★★★★||NO||★★★|
|Interior & Exterior||YES||YES||YES||Interior Only||YES|
|Durable & Long Lasting||★★★★★||★★★★||★★★★||★★★||★★|
|Apply Directly onto Existing Varnish||YES, if exixting varnish |
is a two-part
|Best UV Protection & Yellowing Resistance||★★★★★||★★★★★||★★★★★||For Interior Use Only||★|
|Best Gloss Renention||★★★★★||★★★★||★★★★||NO||★★|
|KEY: ★★★★★ Excellent for this purpose ★★★ Good for this purpose ★ Average for this purpose|
|Varnish Specification Recommendations|
|Stage||Product||Previously Varnished||Bare Wood||Oily Wood (Teak, Iroko)||Overcoating Time*|
|Previously Varnished||Bare Wood|
|Sand||-||220-320 grit||80-180 grit||220-320 grit||80-120 grit||-|
|Pre-Treatment||Perfection, Schooner®, |
Goldspar Satin, Original
|Do not use for this purpose||1 coat thinned 15-20%||Do not use for this purpose||1 coat thinned 15-20%||12 hrs|
|Jet Speed||Do not use for this purpose||2-3 coats||Do not use for this purpose||2-3 coats||4 hrs|
|Varnish Choice |
Follow one complete product scheme
|Schooner®||3-4 coats||4-6 coats||3-4 coats||4-6 coats||12 hrs|
|Goldspar Clear||3-4 coats||4-6 coats||3-4 coats||4-6 coats||12 hrs|
|Goldspar Satin||3-4 coats||4-6 coats||3-4 coats||4-6 coats||12 hrs|
|Original||3-4 coats||4-6 coats||3-4 coats||4-6 coats||12 hrs|
|Perfection||2-3 coats**||3-5 coats||2-3 coats**||4-6 coats||12 hrs|
|*Minimum wait time between coats or between overcoating with the next step in the system, at a temperature of 73°F.|
|**Always avoid applying a two-part product onto a surface previously varnished with a one-part varnish.|
|Note Inter-Prime Wood Sealer 1026 can be used instead of a thinned coat of varnish|
Disclaimer: Charts apply to Interlux products only. The information provided is not intended to be exhaustive. Because iboats.com does not know how this information is being used, they cannot take responsibility for any actions as a result.
The performance of marine paint on many factors outside the control of iboats.com, including surface preparation, proper application, and environmental conditions. Therefore, iboats.com cannot guarantee this product's suitability for your particular purpose or application.
By purchase or use of this product, buyer agrees that the sole and exclusive remedy, if any, is limited to the refund of the purchase price or replacement of the product at iboats.com's option.