Guest Dual Application Battery Chargers

Bank Battery Charger, 6 Amp, 2 Output, 12V/24V - Guest

Description:

• Total Amps: 6 Amps
• Number of Outputs: 2
• Amps per output: 3 Amps
• Battery System: 2-12V or 1-24V
• Output Voltage: 12VDC
• DC Output: 4' Cables with ring terminals
• Input Voltage: 100-130vVAC/60Hz
• Input Connection: 6' AC Cord with Connect Charge plug
• Dimensions: 6.40" x 3.50" x 2.25"
• Weight: 4 Lbs.

Product Features:

• Ignition Protected
• Reverse Polartity Protected
• Short Circuit Protected
• 3-Stage Switching Electronic Circuit
• Maintenance Mode protects batteries during storage
• Fully Potted to Waterproof Electronics
• Vibration and Shock Protected
• Self-Proctecting under extreme ambient conditions
• For Flooded, Gel and AGM Batteries
• 2 - Year Limited Warranty
• Lifetime Warranty Against Water Damage
• Meets all Guest Harsh Environment Guidelines

2 Bank 20 Amp Battery Charger 2620A - Guest

• Total Amps: 20 Amps
• Number of Outputs: 2
• Amps per output: 10/10
• Battery System: 2-12V or 1-24V
• Output Voltage: 12VDC per output
• DC Output: 2 -6' DC Outputs w/ring terminals
• Input Voltage: 100-130VAC/50-60Hz
• Input Connection: 6' AC Cord w/Connect Charge Pro
• Dimensions: 9.60" x 7.0" x 2.63"
• Weight: 8.0 Lbs.

• Ignition Protected
• Reverse Polarity Protected
• Short Circuit Protected
• 3-Stage Switching Electronic Circuit
• Maintenance Mode protects batteries during storage
• Vibration and Shock Protected
• Self-Protecting under extreme ambient conditions
• For Flooded, Gel and AGM Batteries
• 2 - Year Limited Warranty
• Lifetime Warranty Against Water Damage
• Meets all Guest Harsh Environment Guidelines

10-Amp Ring Terminal Dual Application Battery Charger 2611A - Guest

Description:
CHARGE PRO™ MODEL 2611 - Charges Group 24 and Group 27 batteries in either series (24 volt) or parallel (12 volt) configurations without charge/run switches - perfect for trolling motor applications. Pre-wired with 1 6ft AC cord and two independent 4' DC output wires with ring terminals. CHARGE PRO™

• Total Amps: 10
• Number of Outputs: 2
• Amps per output: 5/5
• Battery System: 2-12V or 24V
• Output Voltage: 12V
• DC Output: 2-4' Cables w/ring terminals
• Input Voltage: 100-130VDC/50-60Hz
• AC Input: 6' cord W/Connect Charge Plug
• Dimensions: 7.75" x 5.50" x 2.42"
• Weight: 5.6 Lbs.

• Ignition Protected Reverse Polarity Protected
• Short Circuit Protected
• 3-Stage Switching Electronic Circuit
• Maintenance Mode protects batteries during storage
• Fully Potted to Waterproof Electronics
• Vibration and Shock Protected
• Self-Protecting under extreme ambient conditions
• For Flooded, Gel and AGM Batteries
• 2 - Year Limited Warranty
• Lifetime Warranty Against Water Damage
• Meets all Guest Harsh Environment Guidelines
• Models with AC Cables can be used with the ConnectCharge permanent mounting system